D: [iurt_root_command] chroot warning: %make is deprecated, use %make_build instead warning: %make is deprecated, use %make_build instead Installing /home/iurt/rpmbuild/SRPMS/perl-IO-Tty-1.140.0-1.mga8.src.rpm Building target platforms: aarch64 Building for target aarch64 Executing(%prep): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.kuD1oU + umask 022 + cd /home/iurt/rpmbuild/BUILD + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + cd /home/iurt/rpmbuild/BUILD + rm -rf IO-Tty-1.14 + /usr/bin/gzip -dc /home/iurt/rpmbuild/SOURCES/IO-Tty-1.14.tar.gz + /usr/bin/tar -xof - + STATUS=0 + '[' 0 -ne 0 ']' + cd IO-Tty-1.14 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + RPM_EC=0 ++ jobs -p + exit 0 Executing(%build): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.hZsqPR + umask 022 + cd /home/iurt/rpmbuild/BUILD + cd IO-Tty-1.14 + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + /usr/bin/perl Makefile.PL INSTALLDIRS=vendor Now let's see what we can find out about your system (logfiles of failing tests are available in the conf/ dir)... Looking for _getpty()...... not found. Looking for getpt()........ FOUND. Looking for grantpt()...... FOUND. Looking for openpty()...... not found. Looking for posix_openpt(). FOUND. Looking for ptsname()...... FOUND. Looking for ptsname_r().... FOUND. Looking for sigaction().... FOUND. Looking for strlcpy()...... not found. Looking for ttyname()...... FOUND. Looking for unlockpt()..... FOUND. Looking for libutil.h...... not found. Looking for pty.h.......... FOUND. Looking for sys/pty.h...... not found. Looking for sys/ptyio.h.... not found. Looking for sys/stropts.h.. not found. Looking for termio.h....... FOUND. Looking for termios.h...... FOUND. Looking for util.h......... not found. Checking which symbols compile OK... (sorry for the tedious check, but some systems have not too clean header files, to say the least; '+' means OK, '-' means not defined and '*' has compile problems...) +B0 +B110 +B115200 +B1200 +B134 +B150 -B153600 +B1800 +B19200 +B200 +B230400 +B2400 +B300 -B307200 +B38400 +B460800 +B4800 +B50 +B57600 +B600 +B75 -B76800 +B9600 +BRKINT +BS0 +BS1 +BSDLY +CBAUD -CBAUDEXT +CBRK -CCTS_OFLOW -CDEL +CDSUSP +CEOF +CEOL -CEOL2 +CEOT +CERASE -CESC +CFLUSH +CIBAUD -CIBAUDEXT +CINTR +CKILL +CLNEXT +CLOCAL -CNSWTCH -CNUL +CQUIT +CR0 +CR1 +CR2 +CR3 +CRDLY +CREAD +CRPRNT +CRTSCTS -CRTSXOFF -CRTS_IFLOW +CS5 +CS6 +CS7 +CS8 +CSIZE +CSTART +CSTOP +CSTOPB +CSUSP -CSWTCH +CWERASE -DEFECHO -DIOC -DIOCGETP -DIOCSETP -DOSMODE +ECHO +ECHOCTL +ECHOE +ECHOK +ECHOKE +ECHONL +ECHOPRT +EXTA +EXTB +FF0 +FF1 +FFDLY -FIORDCHK +FLUSHO +HUPCL +ICANON +ICRNL +IEXTEN +IGNBRK +IGNCR +IGNPAR +IMAXBEL +INLCR +INPCK +ISIG +ISTRIP +IUCLC +IXANY +IXOFF +IXON -KBENABLED -LDCHG -LDCLOSE -LDDMAP -LDEMAP -LDGETT -LDGMAP -LDIOC -LDNMAP -LDOPEN -LDSETT -LDSMAP -LOBLK +NCCS +NL0 +NL1 +NLDLY +NOFLSH +OCRNL +OFDEL +OFILL +OLCUC +ONLCR +ONLRET +ONOCR +OPOST -PAGEOUT +PARENB -PAREXT +PARMRK +PARODD +PENDIN -RCV1EN -RTS_TOG +TAB0 +TAB1 +TAB2 +TAB3 +TABDLY -TCDSET +TCFLSH +TCGETA +TCGETS +TCIFLUSH +TCIOFF +TCIOFLUSH +TCION +TCOFLUSH +TCOOFF +TCOON +TCSADRAIN +TCSAFLUSH +TCSANOW +TCSBRK +TCSETA +TCSETAF +TCSETAW -TCSETCTTY +TCSETS +TCSETSF +TCSETSW +TCXONC -TERM_D40 -TERM_D42 -TERM_H45 -TERM_NONE -TERM_TEC -TERM_TEX -TERM_V10 -TERM_V61 +TIOCCBRK -TIOCCDTR +TIOCCONS +TIOCEXCL -TIOCFLUSH -TIOCGETC +TIOCGETD -TIOCGETP -TIOCGLTC +TIOCGPGRP +TIOCGSID +TIOCGSOFTCAR +TIOCGWINSZ -TIOCHPCL -TIOCKBOF -TIOCKBON -TIOCLBIC -TIOCLBIS -TIOCLGET -TIOCLSET +TIOCMBIC +TIOCMBIS +TIOCMGET +TIOCMSET +TIOCM_CAR +TIOCM_CD +TIOCM_CTS +TIOCM_DSR +TIOCM_DTR +TIOCM_LE +TIOCM_RI +TIOCM_RNG +TIOCM_RTS +TIOCM_SR +TIOCM_ST +TIOCNOTTY +TIOCNXCL +TIOCOUTQ -TIOCREMOTE +TIOCSBRK +TIOCSCTTY -TIOCSDTR -TIOCSETC +TIOCSETD -TIOCSETN -TIOCSETP -TIOCSIGNAL -TIOCSLTC +TIOCSPGRP -TIOCSSID +TIOCSSOFTCAR -TIOCSTART +TIOCSTI -TIOCSTOP +TIOCSWINSZ -TM_ANL -TM_CECHO -TM_CINVIS -TM_LCF -TM_NONE -TM_SET -TM_SNL +TOSTOP -VCEOF -VCEOL +VDISCARD -VDSUSP +VEOF +VEOL +VEOL2 +VERASE +VINTR +VKILL +VLNEXT +VMIN +VQUIT +VREPRINT +VSTART +VSTOP +VSUSP -VSWTCH +VT0 +VT1 +VTDLY +VTIME +VWERASE -WRAP +XCASE -XCLUDE -XMT1EN +XTABS >>> Configuration looks good! <<< Writing IO::Tty::Constant.pm... DEFINE = -DHAVE_DEV_PTMX -DHAVE_GETPT -DHAVE_GRANTPT -DHAVE_POSIX_OPENPT -DHAVE_PTSNAME -DHAVE_PTSNAME_R -DHAVE_PTY_H -DHAVE_SIGACTION -DHAVE_TERMIOS_H -DHAVE_TERMIO_H -DHAVE_TTYNAME -DHAVE_UNLOCKPT Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for IO::Tty Writing MYMETA.yml and MYMETA.json + /usr/bin/make -O -j8 'CFLAGS=-O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables' Running Mkbootstrap for Tty () chmod 644 "Tty.bs" "/usr/bin/perl5.30.1" -MExtUtils::Command::MM -e 'cp_nonempty' -- Tty.bs blib/arch/auto/IO/Tty/Tty.bs 644 cp Tty/Constant.pm blib/lib/IO/Tty/Constant.pm cp Tty.pm blib/lib/IO/Tty.pm cp Pty.pm blib/lib/IO/Pty.pm "/usr/bin/perl5.30.1" "/usr/share/perl5/ExtUtils/xsubpp" -typemap '/usr/share/perl5/ExtUtils/typemap' Tty.xs > Tty.xsc mv Tty.xsc Tty.c gcc -c -D_REENTRANT -D_GNU_SOURCE -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fwrapv -fno-strict-aliasing -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -DVERSION=\"1.14\" -DXS_VERSION=\"1.14\" -fPIC "-I/usr/lib64/perl5/CORE" -DHAVE_DEV_PTMX -DHAVE_GETPT -DHAVE_GRANTPT -DHAVE_POSIX_OPENPT -DHAVE_PTSNAME -DHAVE_PTSNAME_R -DHAVE_PTY_H -DHAVE_SIGACTION -DHAVE_TERMIOS_H -DHAVE_TERMIO_H -DHAVE_TTYNAME -DHAVE_UNLOCKPT Tty.c Tty.xs: In function 'XS_IO__Tty_unpack_winsize': Tty.xs:865:12: warning: format '%d' expects argument of type 'int', but argument 2 has type 'STRLEN' {aka 'long unsigned int'} [-Wformat=] 865 | croak("IO::Tty::unpack_winsize(): Bad arg length - got %d, expected %d", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Tty.xs:865:12: warning: format '%d' expects argument of type 'int', but argument 3 has type 'long unsigned int' [-Wformat=] rm -f blib/arch/auto/IO/Tty/Tty.so gcc -lpthread -shared -Wl,--as-needed -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -L/usr/local/lib -fstack-protector-strong Tty.o -o blib/arch/auto/IO/Tty/Tty.so \ -lperl \ chmod 755 blib/arch/auto/IO/Tty/Tty.so Manifying 3 pod documents + RPM_EC=0 ++ jobs -p + exit 0 Executing(%install): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.SpH3HQ + umask 022 + cd /home/iurt/rpmbuild/BUILD + '[' 1 -eq 1 ']' + '[' /home/iurt/rpmbuild/BUILDROOT/perl-IO-Tty-1.140.0-1.mga8.aarch64 '!=' / ']' + rm -rf /home/iurt/rpmbuild/BUILDROOT/perl-IO-Tty-1.140.0-1.mga8.aarch64 ++ dirname /home/iurt/rpmbuild/BUILDROOT/perl-IO-Tty-1.140.0-1.mga8.aarch64 + mkdir -p /home/iurt/rpmbuild/BUILDROOT + mkdir /home/iurt/rpmbuild/BUILDROOT/perl-IO-Tty-1.140.0-1.mga8.aarch64 + cd IO-Tty-1.14 + '[' 1 -eq 1 ']' + /usr/bin/make install DESTDIR=/home/iurt/rpmbuild/BUILDROOT/perl-IO-Tty-1.140.0-1.mga8.aarch64 'INSTALL=/usr/bin/install -p' "/usr/bin/perl5.30.1" -MExtUtils::Command::MM -e 'cp_nonempty' -- Tty.bs blib/arch/auto/IO/Tty/Tty.bs 644 Manifying 3 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /home/iurt/rpmbuild/BUILDROOT/perl-IO-Tty-1.140.0-1.mga8.aarch64/usr/lib64/perl5/vendor_perl/auto/IO/Tty/Tty.so Installing /home/iurt/rpmbuild/BUILDROOT/perl-IO-Tty-1.140.0-1.mga8.aarch64/usr/lib64/perl5/vendor_perl/IO/Tty.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-IO-Tty-1.140.0-1.mga8.aarch64/usr/lib64/perl5/vendor_perl/IO/Pty.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-IO-Tty-1.140.0-1.mga8.aarch64/usr/lib64/perl5/vendor_perl/IO/Tty/Constant.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-IO-Tty-1.140.0-1.mga8.aarch64/usr/share/man/man3/IO::Tty.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-IO-Tty-1.140.0-1.mga8.aarch64/usr/share/man/man3/IO::Tty::Constant.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-IO-Tty-1.140.0-1.mga8.aarch64/usr/share/man/man3/IO::Pty.3pm Appending installation info to /home/iurt/rpmbuild/BUILDROOT/perl-IO-Tty-1.140.0-1.mga8.aarch64/usr/lib64/perl5/perllocal.pod + /usr/lib/rpm/find-debuginfo.sh -j16 --strict-build-id -m -i --build-id-seed 1.140.0-1.mga8 --unique-debug-suffix -1.140.0-1.mga8.aarch64 --unique-debug-src-base perl-IO-Tty-1.140.0-1.mga8.aarch64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 50000000 -S debugsourcefiles.list /home/iurt/rpmbuild/BUILD/IO-Tty-1.14 explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/perl-IO-Tty-1.140.0-1.mga8.aarch64/usr/lib64/perl5/vendor_perl/auto/IO/Tty/Tty.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/perl-IO-Tty-1.140.0-1.mga8.aarch64/usr/lib64/perl5/vendor_perl/auto/IO/Tty/Tty.so objcopy: unable to copy file '/home/iurt/rpmbuild/BUILDROOT/perl-IO-Tty-1.140.0-1.mga8.aarch64/usr/lib64/perl5/vendor_perl/auto/IO/Tty/Tty.so'; reason: Permission denied objcopy: unable to copy file '/home/iurt/rpmbuild/BUILDROOT/perl-IO-Tty-1.140.0-1.mga8.aarch64/usr/lib64/perl5/vendor_perl/auto/IO/Tty/Tty.so'; reason: Permission denied original debug info size: 136kB, size after compression: 132kB /usr/lib/rpm/sepdebugcrcfix: Updated 1 CRC32s, 0 CRC32s did match. 132 blocks + '[' -n '' ']' + /usr/share/spec-helper/clean_files + '[' -n '' ']' + /usr/share/spec-helper/compress_files .xz + '[' -n '' ']' + /usr/share/spec-helper/relink_symlinks + '[' -n '' ']' + /usr/share/spec-helper/clean_perl + '[' -n '' ']' + /usr/share/spec-helper/lib_symlinks + '[' -n '' ']' + /usr/share/spec-helper/gprintify + '[' -n '' ']' + /usr/share/spec-helper/fix_mo + '[' -n '' ']' + /usr/share/spec-helper/translate_menu + '[' -n '' ']' + /usr/share/spec-helper/fix_pamd + '[' -n '' ']' + /usr/share/spec-helper/remove_info_dir + '[' -n '' ']' + /usr/share/spec-helper/fix_eol + '[' -n '' ']' + /usr/share/spec-helper/check_desktop_files + '[' -n '' ']' + /usr/share/spec-helper/check_elf_files + /usr/lib/rpm/brp-python-bytecompile /usr/bin/python 1 1 + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/redhat/brp-mangle-shebangs Executing(%check): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.6cV8JU + umask 022 + cd /home/iurt/rpmbuild/BUILD + cd IO-Tty-1.14 + '[' 1 -eq 1 ']' + /usr/bin/make -O -j8 test "/usr/bin/perl5.30.1" -MExtUtils::Command::MM -e 'cp_nonempty' -- Tty.bs blib/arch/auto/IO/Tty/Tty.bs 644 PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl5.30.1" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/pty_get_winsize.t .. ok # Configuration: -DHAVE_DEV_PTMX -DHAVE_GETPT -DHAVE_GRANTPT -DHAVE_POSIX_OPENPT -DHAVE_PTSNAME -DHAVE_PTSNAME_R -DHAVE_PTY_H -DHAVE_SIGACTION -DHAVE_TERMIOS_H -DHAVE_TERMIO_H -DHAVE_TTYNAME -DHAVE_UNLOCKPT # Checking for appropriate ioctls: # TIOCNOTTY # TIOCSCTTY trying posix_openpt()... trying grantpt()... trying unlockpt()... trying ptsname_r()... trying to open /dev/pts/0... # === Checking if child gets pty as controlling terminal trying posix_openpt()... trying grantpt()... trying unlockpt()... trying ptsname_r()... trying to open /dev/pts/0... WARNING: when the client closes the slave pty, the master gets an error (undef return value and $! eq "Input/output error") instead of EOF (0 return value). Please be sure to handle this in your application (Expect already does). # Checking basic functionality and how your ptys handle large strings... # This test may hang on certain systems, even though it is protected # by alarm(). If the counter stops, try Ctrl-C, the test should continue. trying posix_openpt()... trying grantpt()... trying unlockpt()... trying ptsname_r()... trying to open /dev/pts/0... # isatty($master): YES # isatty($slave): YES # Child PID = 16258 # Good, your raw ptys can handle at least 530 bytes at once. sysread(): Input/output error at t/test.t line 151. Slave got EOF at line 530, byte 0. t/test.t ............. ok All tests successful. Files=2, Tests=6, 4 wallclock secs ( 0.05 usr 0.01 sys + 0.57 cusr 0.95 csys = 1.58 CPU) Result: PASS + RPM_EC=0 ++ jobs -p + exit 0 Processing files: perl-IO-Tty-1.140.0-1.mga8.aarch64 Executing(%doc): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.sJKkiU + umask 022 + cd /home/iurt/rpmbuild/BUILD + cd IO-Tty-1.14 + DOCDIR=/home/iurt/rpmbuild/BUILDROOT/perl-IO-Tty-1.140.0-1.mga8.aarch64/usr/share/doc/perl-IO-Tty + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /home/iurt/rpmbuild/BUILDROOT/perl-IO-Tty-1.140.0-1.mga8.aarch64/usr/share/doc/perl-IO-Tty + cp -pr ChangeLog /home/iurt/rpmbuild/BUILDROOT/perl-IO-Tty-1.140.0-1.mga8.aarch64/usr/share/doc/perl-IO-Tty + cp -pr META.json /home/iurt/rpmbuild/BUILDROOT/perl-IO-Tty-1.140.0-1.mga8.aarch64/usr/share/doc/perl-IO-Tty + cp -pr META.yml /home/iurt/rpmbuild/BUILDROOT/perl-IO-Tty-1.140.0-1.mga8.aarch64/usr/share/doc/perl-IO-Tty + cp -pr MYMETA.yml /home/iurt/rpmbuild/BUILDROOT/perl-IO-Tty-1.140.0-1.mga8.aarch64/usr/share/doc/perl-IO-Tty + RPM_EC=0 ++ jobs -p + exit 0 Provides: perl(IO::Pty) = 1.140.0 perl(IO::Tty) = 1.140.0 perl(IO::Tty::Constant) = 1.140.0 perl-IO-Tty = 1.140.0-1.mga8 perl-IO-Tty(aarch-64) = 1.140.0-1.mga8 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libc.so.6(GLIBC_2.28)(64bit) libperl.so.5.30()(64bit) libpthread.so.0()(64bit) libpthread.so.0(GLIBC_2.17)(64bit) perl(Carp) perl(DynaLoader) perl(Exporter) perl(IO::File) perl(IO::Handle) perl(IO::Tty) perl(IO::Tty::Constant) perl(POSIX) perl(strict) perl(vars) perl-base >= 2:5.30.1 Processing files: perl-IO-Tty-debugsource-1.140.0-1.mga8.aarch64 Provides: perl-IO-Tty-debugsource = 1.140.0-1.mga8 perl-IO-Tty-debugsource(aarch-64) = 1.140.0-1.mga8 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Processing files: perl-IO-Tty-debuginfo-1.140.0-1.mga8.aarch64 Provides: debuginfo(build-id) = c2de96625682f6dee6e0381f0540f0d239984045 perl-IO-Tty-debuginfo = 1.140.0-1.mga8 perl-IO-Tty-debuginfo(aarch-64) = 1.140.0-1.mga8 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Recommends: perl-IO-Tty-debugsource(aarch-64) = 1.140.0-1.mga8 Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/iurt/rpmbuild/BUILDROOT/perl-IO-Tty-1.140.0-1.mga8.aarch64 Wrote: /home/iurt/rpmbuild/RPMS/aarch64/perl-IO-Tty-debugsource-1.140.0-1.mga8.aarch64.rpm Wrote: /home/iurt/rpmbuild/RPMS/aarch64/perl-IO-Tty-1.140.0-1.mga8.aarch64.rpm Wrote: /home/iurt/rpmbuild/RPMS/aarch64/perl-IO-Tty-debuginfo-1.140.0-1.mga8.aarch64.rpm Executing(%clean): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.OlM8CS + umask 022 + cd /home/iurt/rpmbuild/BUILD + cd IO-Tty-1.14 + /usr/bin/rm -rf /home/iurt/rpmbuild/BUILDROOT/perl-IO-Tty-1.140.0-1.mga8.aarch64 + RPM_EC=0 ++ jobs -p + exit 0 Executing(--clean): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.Dbe2tU + umask 022 + cd /home/iurt/rpmbuild/BUILD + rm -rf IO-Tty-1.14 + RPM_EC=0 ++ jobs -p + exit 0 D: [iurt_root_command] Success!