D: [iurt_root_command] chroot
Installing /home/pterjan/rpmbuild/SRPMS/perl-Task-Tapper-Installer-0.2.0-10.mga10.src.rpm
Building target platforms: noarch
Building for target noarch
Executing(%prep): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.x8N9g0
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ cd /home/pterjan/rpmbuild/BUILD
+ rm -rf Task-Tapper-Installer-0.002
+ /usr/lib/rpm/rpmuncompress -x /home/pterjan/rpmbuild/SOURCES/Task-Tapper-Installer-0.002.tar.gz
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd Task-Tapper-Installer-0.002
+ rm -rf /home/pterjan/rpmbuild/BUILD/Task-Tapper-Installer-0.002-SPECPARTS
+ /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILD/Task-Tapper-Installer-0.002-SPECPARTS
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%build): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.1z9YHp
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd Task-Tapper-Installer-0.002
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Task::Tapper::Installer
Writing MYMETA.yml and MYMETA.json
+ /usr/bin/make -O -j16 V=1 VERBOSE=1
cp lib/Task/Tapper/Installer.pm blib/lib/Task/Tapper/Installer.pm
Manifying 1 pod document
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%install): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.gRtHF3
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' /home/pterjan/rpmbuild/BUILDROOT/perl-Task-Tapper-Installer-0.2.0-10.mga10.noarch '!=' / ']'
+ rm -rf /home/pterjan/rpmbuild/BUILDROOT/perl-Task-Tapper-Installer-0.2.0-10.mga10.noarch
++ dirname /home/pterjan/rpmbuild/BUILDROOT/perl-Task-Tapper-Installer-0.2.0-10.mga10.noarch
+ mkdir -p /home/pterjan/rpmbuild/BUILDROOT
+ mkdir /home/pterjan/rpmbuild/BUILDROOT/perl-Task-Tapper-Installer-0.2.0-10.mga10.noarch
+ cd Task-Tapper-Installer-0.002
+ '[' 1 -eq 1 ']'
+ /usr/bin/make install DESTDIR=/home/pterjan/rpmbuild/BUILDROOT/perl-Task-Tapper-Installer-0.2.0-10.mga10.noarch 'INSTALL=/usr/bin/install -p'
Manifying 1 pod document
Installing /home/pterjan/rpmbuild/BUILDROOT/perl-Task-Tapper-Installer-0.2.0-10.mga10.noarch/usr/share/perl5/vendor_perl/Task/Tapper/Installer.pm
Installing /home/pterjan/rpmbuild/BUILDROOT/perl-Task-Tapper-Installer-0.2.0-10.mga10.noarch/usr/share/man/man3/Task::Tapper::Installer.3pm
Appending installation info to /home/pterjan/rpmbuild/BUILDROOT/perl-Task-Tapper-Installer-0.2.0-10.mga10.noarch/usr/lib64/perl5/perllocal.pod
+ /usr/bin/find-debuginfo -j16 --strict-build-id -m -i --build-id-seed 0.2.0-10.mga10 --unique-debug-suffix -0.2.0-10.mga10.noarch --unique-debug-src-base perl-Task-Tapper-Installer-0.2.0-10.mga10.noarch --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 50000000 -S debugsourcefiles.list /home/pterjan/rpmbuild/BUILD/Task-Tapper-Installer-0.002

+ /usr/lib/rpm/check-buildroot
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/compress_files .xz
+ '[' -n '' ']'
+ /usr/share/spec-helper/relink_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_perl
+ '[' -n '' ']'
+ /usr/share/spec-helper/lib_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/gprintify
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_mo
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_pamd
+ '[' -n '' ']'
+ /usr/share/spec-helper/remove_info_dir
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_eol
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_desktop_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_elf_files
+ /usr/lib/rpm/check-rpaths
+ /usr/lib/rpm/brp-remove-la-files
+ /usr/lib/rpm/redhat/brp-mangle-shebangs
+ env -u SOURCE_DATE_EPOCH /usr/lib/rpm/redhat/brp-python-bytecompile '' 1 0 -j16
+ /usr/lib/rpm/redhat/brp-python-hardlink
Executing(%check): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.HDnPEE
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd Task-Tapper-Installer-0.002
+ '[' 1 -eq 1 ']'
+ /usr/bin/make -O -j16 V=1 VERBOSE=1 test
PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl5.38.2" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/release-eol.t ........... skipped: these tests are for release candidate testing
t/release-no-tabs.t ....... skipped: these tests are for release candidate testing
t/release-pod-coverage.t .. skipped: these tests are for release candidate testing
t/release-pod-syntax.t .... skipped: these tests are for release candidate testing
t/task-bogus.t ............ ok
All tests successful.
Files=5, Tests=1,  0 wallclock secs ( 0.03 usr  0.00 sys +  0.20 cusr  0.01 csys =  0.24 CPU)
Result: PASS
+ RPM_EC=0
++ jobs -p
+ exit 0
Processing files: perl-Task-Tapper-Installer-0.2.0-10.mga10.noarch
Executing(%doc): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.CTHXo6
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd Task-Tapper-Installer-0.002
+ DOCDIR=/home/pterjan/rpmbuild/BUILDROOT/perl-Task-Tapper-Installer-0.2.0-10.mga10.noarch/usr/share/doc/perl-Task-Tapper-Installer
+ export LC_ALL=
+ LC_ALL=
+ export DOCDIR
+ /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILDROOT/perl-Task-Tapper-Installer-0.2.0-10.mga10.noarch/usr/share/doc/perl-Task-Tapper-Installer
+ cp -pr /home/pterjan/rpmbuild/BUILD/Task-Tapper-Installer-0.002/Changes /home/pterjan/rpmbuild/BUILDROOT/perl-Task-Tapper-Installer-0.2.0-10.mga10.noarch/usr/share/doc/perl-Task-Tapper-Installer
+ cp -pr /home/pterjan/rpmbuild/BUILD/Task-Tapper-Installer-0.002/LICENSE /home/pterjan/rpmbuild/BUILDROOT/perl-Task-Tapper-Installer-0.2.0-10.mga10.noarch/usr/share/doc/perl-Task-Tapper-Installer
+ cp -pr /home/pterjan/rpmbuild/BUILD/Task-Tapper-Installer-0.002/META.json /home/pterjan/rpmbuild/BUILDROOT/perl-Task-Tapper-Installer-0.2.0-10.mga10.noarch/usr/share/doc/perl-Task-Tapper-Installer
+ cp -pr /home/pterjan/rpmbuild/BUILD/Task-Tapper-Installer-0.002/META.yml /home/pterjan/rpmbuild/BUILDROOT/perl-Task-Tapper-Installer-0.2.0-10.mga10.noarch/usr/share/doc/perl-Task-Tapper-Installer
+ cp -pr /home/pterjan/rpmbuild/BUILD/Task-Tapper-Installer-0.002/MYMETA.yml /home/pterjan/rpmbuild/BUILDROOT/perl-Task-Tapper-Installer-0.2.0-10.mga10.noarch/usr/share/doc/perl-Task-Tapper-Installer
+ cp -pr /home/pterjan/rpmbuild/BUILD/Task-Tapper-Installer-0.002/README /home/pterjan/rpmbuild/BUILDROOT/perl-Task-Tapper-Installer-0.2.0-10.mga10.noarch/usr/share/doc/perl-Task-Tapper-Installer
+ RPM_EC=0
++ jobs -p
+ exit 0
Provides: perl(Task::Tapper::Installer) = 0.2.0 perl-Task-Tapper-Installer = 0.2.0-10.mga10
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: perl(Tapper::Installer) perl(Tapper::Remote) perl(strict) perl(warnings) perl-base >= 2:5.38.2
Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/pterjan/rpmbuild/BUILDROOT/perl-Task-Tapper-Installer-0.2.0-10.mga10.noarch
Wrote: /home/pterjan/rpmbuild/RPMS/noarch/perl-Task-Tapper-Installer-0.2.0-10.mga10.noarch.rpm
Executing(%clean): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.ffPgu9
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd Task-Tapper-Installer-0.002
+ /usr/bin/rm -rf /home/pterjan/rpmbuild/BUILDROOT/perl-Task-Tapper-Installer-0.2.0-10.mga10.noarch
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(rmbuild): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.JKdK6I
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ rm -rf /home/pterjan/rpmbuild/BUILD/Task-Tapper-Installer-0.002-SPECPARTS
+ rm -rf Task-Tapper-Installer-0.002 Task-Tapper-Installer-0.002.gemspec
+ RPM_EC=0
++ jobs -p
+ exit 0
D: [iurt_root_command] Success!