D: [iurt_root_command] chroot warning: line 46: It's not recommended to have unversioned Obsoletes: Obsoletes: desktop-printing warning: line 47: It's not recommended to have unversioned Obsoletes: Obsoletes: printerdrake Installing /home/pterjan/rpmbuild/SRPMS/system-config-printer-1.5.15-4.mga9.src.rpm Building target platforms: x86_64 Building for target x86_64 Executing(%prep): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.1IBxku + umask 022 + cd /home/pterjan/rpmbuild/BUILD + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + cd /home/pterjan/rpmbuild/BUILD + rm -rf system-config-printer-1.5.15 + /usr/lib/rpm/rpmuncompress -x /home/pterjan/rpmbuild/SOURCES/system-config-printer-1.5.15.tar.xz + STATUS=0 + '[' 0 -ne 0 ']' + cd system-config-printer-1.5.15 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + echo 'Patch #200 (system-config-printer-1.5.0-mga_custom-applet.patch):' Patch #200 (system-config-printer-1.5.0-mga_custom-applet.patch): + /usr/bin/patch --no-backup-if-mismatch -f -p1 -b --suffix .mga_custom-applet --fuzz=0 patching file applet.py Hunk #2 succeeded at 117 (offset 6 lines). Hunk #3 succeeded at 381 (offset 6 lines). + echo 'Patch #202 (system-config-printer-1.4.2-mga_custom-system-config-printer.patch):' Patch #202 (system-config-printer-1.4.2-mga_custom-system-config-printer.patch): + /usr/bin/patch --no-backup-if-mismatch -f -p1 -b --suffix .mga_custom-system-config-printer --fuzz=0 patching file newprinter.py Hunk #1 succeeded at 40 (offset -4 lines). Hunk #2 succeeded at 1390 (offset 228 lines). Hunk #3 succeeded at 1659 (offset 360 lines). Hunk #4 succeeded at 3297 (offset 422 lines). patching file ppdsloader.py patching file system-config-printer.py Hunk #2 succeeded at 536 (offset 80 lines). Hunk #3 succeeded at 1969 (offset 139 lines). patching file udev/udev-add-printer Hunk #3 succeeded at 108 (offset 1 line). Hunk #4 succeeded at 198 (offset 1 line). Hunk #5 succeeded at 219 (offset 1 line). + echo 'Patch #203 (system-config-printer-1.5.2-start-applet.patch):' Patch #203 (system-config-printer-1.5.2-start-applet.patch): + /usr/bin/patch --no-backup-if-mismatch -f -p1 -b --suffix .start_applet --fuzz=0 patching file print-applet.desktop.in + echo 'Patch #204 (system-config-printer-1.4.4-udev-configure-printer-mga.patch):' Patch #204 (system-config-printer-1.4.4-udev-configure-printer-mga.patch): + /usr/bin/patch --no-backup-if-mismatch -f -p1 -b --suffix .udev-configue-printer-mga --fuzz=0 patching file configure.ac Hunk #1 succeeded at 37 (offset 4 lines). patching file Makefile.am Hunk #1 succeeded at 189 (offset 7 lines). patching file udev/udev-configure-printer.c Hunk #3 succeeded at 1927 (offset 15 lines). Hunk #4 succeeded at 2021 (offset 21 lines). Hunk #5 succeeded at 2168 (offset 27 lines). Hunk #6 succeeded at 2297 (offset 60 lines). + echo 'Patch #300 (system-config-printer-1.3.7-remove-Brother-HL-2030-blacklist.patch):' Patch #300 (system-config-printer-1.3.7-remove-Brother-HL-2030-blacklist.patch): + /usr/bin/patch --no-backup-if-mismatch -f -p0 -b --suffix .mga-1349 --fuzz=0 patching file ./xml/preferreddrivers.xml Hunk #1 succeeded at 199 (offset 7 lines). + echo 'Patch #301 (system-config-printer-1.5.5-mga_visual-artifacts.patch):' Patch #301 (system-config-printer-1.5.5-mga_visual-artifacts.patch): + /usr/bin/patch --no-backup-if-mismatch -f -p0 -b --suffix .mga-14981 --fuzz=0 patching file system-config-printer.py Hunk #1 succeeded at 1061 (offset 61 lines). Hunk #2 succeeded at 1074 (offset 61 lines). Hunk #3 succeeded at 1093 (offset 64 lines). + echo 'Patch #302 (apply-new-udev-rules.patch):' Patch #302 (apply-new-udev-rules.patch): + /usr/bin/patch --no-backup-if-mismatch -f -p0 --fuzz=0 patching file system-config-printer.py Hunk #1 succeeded at 540 (offset 31 lines). + echo 'Patch #303 (avoid-reinstall-of-libsane-hpaio.patch):' Patch #303 (avoid-reinstall-of-libsane-hpaio.patch): + /usr/bin/patch --no-backup-if-mismatch -f -p0 --fuzz=0 patching file newprinter.py Hunk #1 succeeded at 1553 (offset 10 lines). + RPM_EC=0 ++ jobs -p + exit 0 Executing(%build): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.ooCopc + umask 022 + cd /home/pterjan/rpmbuild/BUILD + cd system-config-printer-1.5.15 + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + ./bootstrap configure.ac:20: warning: The macro `AC_HELP_STRING' is obsolete. configure.ac:20: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... ./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from... configure.ac:20: the top level configure.ac:43: warning: The macro `AC_HELP_STRING' is obsolete. configure.ac:43: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... ./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from... configure.ac:43: the top level + CFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables ' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables ' + export FCFLAGS + LDFLAGS=' -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib64: + export LT_SYS_LIBRARY_PATH + CONFIGURE_TOP=. + '[' 1 = 1 ']' ++ find . -name config.guess -o -name config.sub + for i in $(find ${CONFIGURE_TOP} -name config.guess -o -name config.sub) ++ basename ./config.guess + '[' -f /usr/lib/rpm/mageia/config.guess ']' ++ basename ./config.guess + cp -af /usr/lib/rpm/mageia/config.guess ./config.guess + for i in $(find ${CONFIGURE_TOP} -name config.guess -o -name config.sub) ++ basename ./config.sub + '[' -f /usr/lib/rpm/mageia/config.sub ']' ++ basename ./config.sub + cp -af /usr/lib/rpm/mageia/config.sub ./config.sub + /usr/lib/rpm/mageia/force-as-needed-for-shared-lib-in-libtool Forcing -Wl,--as-needed in configure/libtool to workaround libtool bug (cf http://lists.gnu.org/archive/html/libtool-patches/2004-06/msg00002.html) + /usr/lib/rpm/mageia/drop-ld-no-undefined-for-shared-lib-modules-in-libtool + /usr/lib/rpm/mageia/fix-libtool-ltmain-from-overlinking + /usr/lib/rpm/mageia/fix-libtool-from-moving-options-after-libs . + /usr/lib/rpm/mageia/fix-dlsearch-path-in-libtool-for-multilib . lib64 + ./configure --host=x86_64-mageia-linux-gnu --build=x86_64-mageia-linux-gnu --program-prefix= --disable-dependency-tracking --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-systemdsystemunitdir=/usr/lib/systemd/system --with-udev-rules checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether NLS is requested... yes checking for intltool-update... /usr/bin/intltool-update checking for intltool-merge... /usr/bin/intltool-merge checking for intltool-extract... /usr/bin/intltool-extract checking for xgettext... /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/msgfmt checking for perl... /usr/bin/perl checking for perl >= 5.8.1... 5.36.0 checking for XML::Parser... ok checking for a sed that does not truncate output... /usr/bin/sed checking for msgfmt... (cached) /usr/bin/msgfmt checking for gmsgfmt... (cached) /usr/bin/msgfmt checking for xgettext... (cached) /usr/bin/xgettext checking for msgmerge... (cached) /usr/bin/msgmerge checking whether make supports the include directive... yes (GNU style) checking for x86_64-mageia-linux-gnu-gcc... no checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... none checking build system type... x86_64-mageia-linux-gnu checking host system type... x86_64-mageia-linux-gnu checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for shared library run path origin... done checking 32-bit host C ABI... no checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ELF binary format... yes checking for the common suffixes of directories in the library search path... lib,lib,lib64 checking for CFPreferencesCopyAppValue... no checking for CFLocaleCopyPreferredLanguages... no checking for GNU gettext in libc... yes checking whether to use NLS... yes checking where the gettext function comes from... libc checking for a Python interpreter with version >= 3... python checking for python... /usr/bin/python checking for python version... 3.10 checking for python platform... linux checking for GNU default python prefix... ${prefix} checking for GNU default python exec_prefix... ${exec_prefix} checking for python script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.10/site-packages checking for python extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib64/python3.10/site-packages checking for x86_64-mageia-linux-gnu-pkg-config... /usr/bin/x86_64-mageia-linux-gnu-pkg-config checking pkg-config is at least version 0.9.0... yes checking for GLIB... yes checking for DBUS... yes checking for DBUSGLIB... yes checking for libudev... yes checking for libusb... yes checking for x86_64-mageia-linux-gnu-pkg-config... (cached) /usr/bin/x86_64-mageia-linux-gnu-pkg-config checking pkg-config is at least version 0.9.0... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating po/Makefile.in config.status: creating system-config-printer config.status: creating system-config-printer-applet config.status: creating install-printerdriver config.status: creating dbus/scp-dbus-service config.status: creating udev/configure-printer@.service config.status: executing po-directories commands config.status: creating po/POTFILES config.status: creating po/Makefile config.status: executing depfiles commands config.status: executing po/stamp-it commands + /usr/bin/make Making all in po make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/system-config-printer-1.5.15/po' file=`echo ar | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ar.po file=`echo as | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file as.po file=`echo ast | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ast.po file=`echo bg | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file bg.po file=`echo bn_IN | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file bn_IN.po file=`echo bn | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file bn.po file=`echo br | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file br.po file=`echo bs | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file bs.po file=`echo ca | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ca.po file=`echo cs | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file cs.po file=`echo cy | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file cy.po file=`echo da | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file da.po file=`echo de | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file de.po file=`echo el | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file el.po file=`echo en_GB | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file en_GB.po file=`echo es | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file es.po file=`echo et | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file et.po file=`echo fa | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file fa.po file=`echo fi | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file fi.po file=`echo fr | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file fr.po file=`echo fur | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file fur.po file=`echo gu | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file gu.po file=`echo he | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file he.po file=`echo hi | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file hi.po file=`echo hr | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file hr.po file=`echo hu | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file hu.po file=`echo id | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file id.po file=`echo is | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file is.po file=`echo it | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file it.po file=`echo ja | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ja.po file=`echo kn | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file kn.po file=`echo ko | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ko.po file=`echo lt | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file lt.po file=`echo lv | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file lv.po file=`echo mai | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file mai.po file=`echo ml | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ml.po file=`echo mr | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file mr.po file=`echo ms | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ms.po file=`echo nb | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file nb.po file=`echo nds | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file nds.po file=`echo nl | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file nl.po file=`echo nn | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file nn.po file=`echo oc | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file oc.po file=`echo or | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file or.po file=`echo pa | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file pa.po file=`echo pl | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file pl.po file=`echo pt_BR | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file pt_BR.po file=`echo pt | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file pt.po file=`echo ro | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ro.po file=`echo ru | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ru.po file=`echo si | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file si.po file=`echo sk | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file sk.po file=`echo sl | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file sl.po file=`echo sr@latin | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file sr@latin.po file=`echo sr | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file sr.po file=`echo sv | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file sv.po file=`echo ta | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ta.po file=`echo te | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file te.po file=`echo th | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file th.po file=`echo tr | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file tr.po file=`echo uk | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file uk.po file=`echo vi | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file vi.po file=`echo zh_CN | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file zh_CN.po file=`echo zh_TW | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file zh_TW.po make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/system-config-printer-1.5.15' gcc -DPACKAGE_NAME=\"system-config-printer\" -DPACKAGE_TARNAME=\"system-config-printer\" -DPACKAGE_VERSION=\"1.5.15\" -DPACKAGE_STRING=\"system-config-printer\ 1.5.15\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"system-config-printer\" -DVERSION=\"1.5.15\" -DENABLE_NLS=1 -DHAVE_GETTEXT=1 -DHAVE_DCGETTEXT=1 -I. -I/usr/include/libusb-1.0 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dbus-1.0 -I/usr/lib64/dbus-1.0/include -I/usr/include/dbus-1.0 -I/usr/lib64/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -c -o udev/udev_configure_printer-udev-configure-printer.o `test -f 'udev/udev-configure-printer.c' || echo './'`udev/udev-configure-printer.c udev/udev-configure-printer.c: In function 'find_matching_device_uris': udev/udev-configure-printer.c:1392:3: warning: 'httpConnectEncrypt' is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 1392 | cups = httpConnectEncrypt (cupsServer (), ippPort(), cupsEncryption ()); | ^~~~ In file included from /usr/include/cups/ipp.h:18, from /usr/include/cups/cups.h:28, from udev/udev-configure-printer.c:36: /usr/include/cups/http.h:477:26: note: declared here 477 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ udev/udev-configure-printer.c: In function 'for_each_matching_queue': udev/udev-configure-printer.c:1724:3: warning: 'httpConnectEncrypt' is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 1724 | http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (), | ^~~~~~ /usr/include/cups/http.h:477:26: note: declared here 477 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ udev/udev-configure-printer.c: In function 'enable_queue': udev/udev-configure-printer.c:1910:3: warning: 'httpConnectEncrypt' is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 1910 | http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (), | ^~~~~~ /usr/include/cups/http.h:477:26: note: declared here 477 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ udev/udev-configure-printer.c: In function 'remove_queue': udev/udev-configure-printer.c:2114:3: warning: 'httpConnectEncrypt' is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 2114 | http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (), | ^~~~~~ /usr/include/cups/http.h:477:26: note: declared here 477 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ udev/udev-configure-printer.c: In function 'disable_queue': udev/udev-configure-printer.c:2146:3: warning: 'httpConnectEncrypt' is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 2146 | http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (), | ^~~~~~ /usr/include/cups/http.h:477:26: note: declared here 477 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ gcc -I/usr/include/libusb-1.0 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dbus-1.0 -I/usr/lib64/dbus-1.0/include -I/usr/include/dbus-1.0 -I/usr/lib64/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -o udev/udev-configure-printer udev/udev_configure_printer-udev-configure-printer.o -lcups -ludev -lusb-1.0 -lglib-2.0 -ldbus-glib-1 -ldbus-1 xmlto man -o man man/system-config-printer.xml Warn: AUTHOR sect.: no personblurb|contrib for Tim Waugh Note: AUTHOR sect.: see http://www.docbook.org/tdg5/en/html/contr Note: AUTHOR sect.: see http://www.docbook.org/tdg5/en/html/perso Note: Writing system-config-printer.1 Warn: AUTHOR sect.: no personblurb|contrib for Tim Waugh Note: AUTHOR sect.: see http://www.docbook.org/tdg5/en/html/contr Note: AUTHOR sect.: see http://www.docbook.org/tdg5/en/html/perso Note: Writing system-config-printer-applet.1 touch .stamp-man-pages-built LC_ALL=C /usr/bin/intltool-merge -x -u -c ./po/.intltool-merge-cache ./po system-config-printer.appdata.xml.in system-config-printer.appdata.xml Generating and caching the translation database Merging translations into system-config-printer.appdata.xml. CREATED system-config-printer.appdata.xml LC_ALL=C /usr/bin/intltool-merge -d -u -c ./po/.intltool-merge-cache ./po system-config-printer.desktop.in system-config-printer.desktop Found cached translation database Merging translations into system-config-printer.desktop. LC_ALL=C /usr/bin/intltool-merge -d -u -c ./po/.intltool-merge-cache ./po print-applet.desktop.in print-applet.desktop Found cached translation database Merging translations into print-applet.desktop. sed \ -e "s|\@prefix\@|/usr|" \ -e "s|\@datadir\@|/usr/share|" \ -e "s|\@localedir\@|/usr/share/locale|" \ -e "s|\@VERSION\@|1.5.15|" \ -e "s|\@PACKAGE\@|system-config-printer|" \ config.py.in > config.py sed \ -e "s|\@bindir\@|/usr/bin|" \ dbus/org.fedoraproject.Config.Printing.service.in >dbus/org.fedoraproject.Config.Printing.service if [ "." != "." ]; then \ cp ./setup.py .; \ /usr/bin/mkdir -p cupshelpers; \ for file in cupshelpers/__init__.py cupshelpers/cupshelpers.py cupshelpers/installdriver.py cupshelpers/ppds.py cupshelpers/openprinting.py cupshelpers/xmldriverprefs.py; do \ cp ./$file $file; \ done; \ fi touch .stamp-distutils-in-builddir /usr/bin/mkdir -p cupshelpers sed \ -e "s|\@prefix\@|/usr|" \ -e "s|\@sysconfdir\@|/etc|" \ -e "s|\@cupsserverbindir\@|/usr/lib/cups|" \ cupshelpers/config.py.in > cupshelpers/config.py /usr/bin/python setup.py build running build running build_py creating build creating build/lib creating build/lib/cupshelpers copying cupshelpers/ppds.py -> build/lib/cupshelpers copying cupshelpers/openprinting.py -> build/lib/cupshelpers copying cupshelpers/config.py -> build/lib/cupshelpers copying cupshelpers/cupshelpers.py -> build/lib/cupshelpers copying cupshelpers/__init__.py -> build/lib/cupshelpers copying cupshelpers/installdriver.py -> build/lib/cupshelpers copying cupshelpers/xmldriverprefs.py -> build/lib/cupshelpers make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/system-config-printer-1.5.15' + gcc /home/pterjan/rpmbuild/SOURCES/hp-makeuri-mga.c -o hp-makeuri-mga -lhpmud + RPM_EC=0 ++ jobs -p + exit 0 Executing(%install): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.tFbelP + umask 022 + cd /home/pterjan/rpmbuild/BUILD + '[' 1 -eq 1 ']' + '[' /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64 '!=' / ']' + rm -rf /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64 ++ dirname /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64 + mkdir -p /home/pterjan/rpmbuild/BUILDROOT + mkdir /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64 + cd system-config-printer-1.5.15 + '[' 1 -eq 1 ']' + /usr/bin/make install DESTDIR=/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64 'INSTALL=/usr/bin/install -p' Making install in po make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/system-config-printer-1.5.15/po' linguas="ar as ast bg bn_IN bn br bs ca cs cy da de el en_GB es et fa fi fr fur gu he hi hr hu id is it ja kn ko lt lv mai ml mr ms nb nds nl nn oc or pa pl pt_BR pt ro ru si sk sl sr@latin sr sv ta te th tr uk vi zh_CN zh_TW "; \ for lang in $linguas; do \ dir=/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/$lang/LC_MESSAGES; \ /bin/sh /home/pterjan/rpmbuild/BUILD/system-config-printer-1.5.15/install-sh -d $dir; \ if test -r $lang.gmo; then \ /usr/bin/install -p -m 644 $lang.gmo $dir/system-config-printer.mo; \ echo "installing $lang.gmo as $dir/system-config-printer.mo"; \ else \ /usr/bin/install -p -m 644 ./$lang.gmo $dir/system-config-printer.mo; \ echo "installing ./$lang.gmo as" \ "$dir/system-config-printer.mo"; \ fi; \ if test -r $lang.gmo.m; then \ /usr/bin/install -p -m 644 $lang.gmo.m $dir/system-config-printer.mo.m; \ echo "installing $lang.gmo.m as $dir/system-config-printer.mo.m"; \ else \ if test -r ./$lang.gmo.m ; then \ /usr/bin/install -p -m 644 ./$lang.gmo.m \ $dir/system-config-printer.mo.m; \ echo "installing ./$lang.gmo.m as" \ "$dir/system-config-printer.mo.m"; \ else \ true; \ fi; \ fi; \ done installing ar.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/ar/LC_MESSAGES/system-config-printer.mo installing as.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/as/LC_MESSAGES/system-config-printer.mo installing ast.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/ast/LC_MESSAGES/system-config-printer.mo installing bg.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/bg/LC_MESSAGES/system-config-printer.mo installing bn_IN.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/bn_IN/LC_MESSAGES/system-config-printer.mo installing bn.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/bn/LC_MESSAGES/system-config-printer.mo installing br.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/br/LC_MESSAGES/system-config-printer.mo installing bs.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/bs/LC_MESSAGES/system-config-printer.mo installing ca.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/ca/LC_MESSAGES/system-config-printer.mo installing cs.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/cs/LC_MESSAGES/system-config-printer.mo installing cy.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/cy/LC_MESSAGES/system-config-printer.mo installing da.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/da/LC_MESSAGES/system-config-printer.mo installing de.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/de/LC_MESSAGES/system-config-printer.mo installing el.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/el/LC_MESSAGES/system-config-printer.mo installing en_GB.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/en_GB/LC_MESSAGES/system-config-printer.mo installing es.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/es/LC_MESSAGES/system-config-printer.mo installing et.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/et/LC_MESSAGES/system-config-printer.mo installing fa.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/fa/LC_MESSAGES/system-config-printer.mo installing fi.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/fi/LC_MESSAGES/system-config-printer.mo installing fr.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/fr/LC_MESSAGES/system-config-printer.mo installing fur.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/fur/LC_MESSAGES/system-config-printer.mo installing gu.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/gu/LC_MESSAGES/system-config-printer.mo installing he.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/he/LC_MESSAGES/system-config-printer.mo installing hi.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/hi/LC_MESSAGES/system-config-printer.mo installing hr.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/hr/LC_MESSAGES/system-config-printer.mo installing hu.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/hu/LC_MESSAGES/system-config-printer.mo installing id.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/id/LC_MESSAGES/system-config-printer.mo installing is.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/is/LC_MESSAGES/system-config-printer.mo installing it.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/it/LC_MESSAGES/system-config-printer.mo installing ja.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/ja/LC_MESSAGES/system-config-printer.mo installing kn.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/kn/LC_MESSAGES/system-config-printer.mo installing ko.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/ko/LC_MESSAGES/system-config-printer.mo installing lt.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/lt/LC_MESSAGES/system-config-printer.mo installing lv.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/lv/LC_MESSAGES/system-config-printer.mo installing mai.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/mai/LC_MESSAGES/system-config-printer.mo installing ml.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/ml/LC_MESSAGES/system-config-printer.mo installing mr.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/mr/LC_MESSAGES/system-config-printer.mo installing ms.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/ms/LC_MESSAGES/system-config-printer.mo installing nb.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/nb/LC_MESSAGES/system-config-printer.mo installing nds.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/nds/LC_MESSAGES/system-config-printer.mo installing nl.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/nl/LC_MESSAGES/system-config-printer.mo installing nn.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/nn/LC_MESSAGES/system-config-printer.mo installing oc.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/oc/LC_MESSAGES/system-config-printer.mo installing or.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/or/LC_MESSAGES/system-config-printer.mo installing pa.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/pa/LC_MESSAGES/system-config-printer.mo installing pl.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/pl/LC_MESSAGES/system-config-printer.mo installing pt_BR.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/pt_BR/LC_MESSAGES/system-config-printer.mo installing pt.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/pt/LC_MESSAGES/system-config-printer.mo installing ro.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/ro/LC_MESSAGES/system-config-printer.mo installing ru.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/ru/LC_MESSAGES/system-config-printer.mo installing si.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/si/LC_MESSAGES/system-config-printer.mo installing sk.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/sk/LC_MESSAGES/system-config-printer.mo installing sl.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/sl/LC_MESSAGES/system-config-printer.mo installing sr@latin.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/sr@latin/LC_MESSAGES/system-config-printer.mo installing sr.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/sr/LC_MESSAGES/system-config-printer.mo installing sv.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/sv/LC_MESSAGES/system-config-printer.mo installing ta.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/ta/LC_MESSAGES/system-config-printer.mo installing te.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/te/LC_MESSAGES/system-config-printer.mo installing th.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/th/LC_MESSAGES/system-config-printer.mo installing tr.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/tr/LC_MESSAGES/system-config-printer.mo installing uk.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/uk/LC_MESSAGES/system-config-printer.mo installing vi.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/vi/LC_MESSAGES/system-config-printer.mo installing zh_CN.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/zh_CN/LC_MESSAGES/system-config-printer.mo installing zh_TW.gmo as /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/locale/zh_TW/LC_MESSAGES/system-config-printer.mo make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/system-config-printer-1.5.15/po' make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/system-config-printer-1.5.15' /usr/bin/python setup.py build running build running build_py make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/system-config-printer-1.5.15' /usr/bin/python setup.py install --prefix=/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr running install /usr/lib/python3.10/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools. warnings.warn( /usr/lib/python3.10/site-packages/setuptools/command/easy_install.py:144: EasyInstallDeprecationWarning: easy_install command is deprecated. Use build and pip and other standards-based tools. warnings.warn( Checking .pth file support in /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/lib/python3.10/site-packages/ /usr/bin/python -E -c pass TEST FAILED: /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/lib/python3.10/site-packages/ does NOT support .pth files bad install directory or PYTHONPATH You are attempting to install a package to a directory that is not on PYTHONPATH and which Python does not read ".pth" files from. The installation directory you specified (via --install-dir, --prefix, or the distutils default setting) was: /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/lib/python3.10/site-packages/ and your PYTHONPATH environment variable currently contains: '' Here are some of your options for correcting the problem: * You can choose a different installation directory, i.e., one that is on PYTHONPATH or supports .pth files * You can add the installation directory to the PYTHONPATH environment variable. (It must then also be on PYTHONPATH whenever you run Python and want to use the package(s) you are installing.) * You can set up the installation directory to support ".pth" files by using one of the approaches described here: https://setuptools.pypa.io/en/latest/deprecated/easy_install.html#custom-installation-locations Please make the appropriate changes for your system and try again. running bdist_egg running egg_info creating cupshelpers.egg-info writing cupshelpers.egg-info/PKG-INFO writing dependency_links to cupshelpers.egg-info/dependency_links.txt writing top-level names to cupshelpers.egg-info/top_level.txt writing manifest file 'cupshelpers.egg-info/SOURCES.txt' reading manifest file 'cupshelpers.egg-info/SOURCES.txt' adding license file 'COPYING' adding license file 'AUTHORS' writing manifest file 'cupshelpers.egg-info/SOURCES.txt' installing library code to build/bdist.linux-x86_64/egg running install_lib running build_py creating build/bdist.linux-x86_64 creating build/bdist.linux-x86_64/egg creating build/bdist.linux-x86_64/egg/cupshelpers copying build/lib/cupshelpers/ppds.py -> build/bdist.linux-x86_64/egg/cupshelpers copying build/lib/cupshelpers/openprinting.py -> build/bdist.linux-x86_64/egg/cupshelpers copying build/lib/cupshelpers/config.py -> build/bdist.linux-x86_64/egg/cupshelpers copying build/lib/cupshelpers/cupshelpers.py -> build/bdist.linux-x86_64/egg/cupshelpers copying build/lib/cupshelpers/__init__.py -> build/bdist.linux-x86_64/egg/cupshelpers copying build/lib/cupshelpers/installdriver.py -> build/bdist.linux-x86_64/egg/cupshelpers copying build/lib/cupshelpers/xmldriverprefs.py -> build/bdist.linux-x86_64/egg/cupshelpers byte-compiling build/bdist.linux-x86_64/egg/cupshelpers/ppds.py to ppds.cpython-310.pyc byte-compiling build/bdist.linux-x86_64/egg/cupshelpers/openprinting.py to openprinting.cpython-310.pyc byte-compiling build/bdist.linux-x86_64/egg/cupshelpers/config.py to config.cpython-310.pyc byte-compiling build/bdist.linux-x86_64/egg/cupshelpers/cupshelpers.py to cupshelpers.cpython-310.pyc byte-compiling build/bdist.linux-x86_64/egg/cupshelpers/__init__.py to __init__.cpython-310.pyc byte-compiling build/bdist.linux-x86_64/egg/cupshelpers/installdriver.py to installdriver.cpython-310.pyc byte-compiling build/bdist.linux-x86_64/egg/cupshelpers/xmldriverprefs.py to xmldriverprefs.cpython-310.pyc creating build/bdist.linux-x86_64/egg/EGG-INFO copying cupshelpers.egg-info/PKG-INFO -> build/bdist.linux-x86_64/egg/EGG-INFO copying cupshelpers.egg-info/SOURCES.txt -> build/bdist.linux-x86_64/egg/EGG-INFO copying cupshelpers.egg-info/dependency_links.txt -> build/bdist.linux-x86_64/egg/EGG-INFO copying cupshelpers.egg-info/top_level.txt -> build/bdist.linux-x86_64/egg/EGG-INFO zip_safe flag not set; analyzing archive contents... cupshelpers.__pycache__.xmldriverprefs.cpython-310: module references __file__ creating dist creating 'dist/cupshelpers-1.0-py3.10.egg' and adding 'build/bdist.linux-x86_64/egg' to it removing 'build/bdist.linux-x86_64/egg' (and everything under it) Processing cupshelpers-1.0-py3.10.egg creating /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/lib/python3.10/site-packages/cupshelpers-1.0-py3.10.egg Extracting cupshelpers-1.0-py3.10.egg to /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/lib/python3.10/site-packages Installed /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/lib/python3.10/site-packages/cupshelpers-1.0-py3.10.egg Processing dependencies for cupshelpers==1.0 Finished processing dependencies for cupshelpers==1.0 /usr/bin/mkdir -p '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/bin' /usr/bin/install -p system-config-printer install-printerdriver system-config-printer-applet dbus/scp-dbus-service '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/bin' /usr/bin/mkdir -p '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/metainfo' /usr/bin/install -p -m 644 system-config-printer.appdata.xml '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/metainfo' /usr/bin/mkdir -p '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/etc/cupshelpers' /usr/bin/install -p -m 644 xml/preferreddrivers.xml '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/etc/cupshelpers' /usr/bin/mkdir -p '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/etc/dbus-1/system.d/' /usr/bin/install -p -m 644 dbus/com.redhat.NewPrinterNotification.conf dbus/com.redhat.PrinterDriversInstaller.conf '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/etc/dbus-1/system.d/' /usr/bin/mkdir -p '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/dbus-1/interfaces/' /usr/bin/install -p -m 644 dbus/org.fedoraproject.Config.Printing.xml '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/dbus-1/interfaces/' mkdir -p /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/applications/ mkdir -p /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/applications/ desktop-file-install \ --dir /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/applications/ \ --add-category System \ --add-category Settings \ --add-category HardwareSettings \ --add-category Printing \ --add-category GTK \ system-config-printer.desktop desktop-file-install \ --dir /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/etc/xdg/autostart/ \ --add-category System \ --add-category Monitor \ --add-category GTK \ print-applet.desktop /usr/bin/mkdir -p '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/man/man1' /usr/bin/install -p -m 644 man/system-config-printer.1 man/system-config-printer-applet.1 '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/man/man1' /usr/bin/mkdir -p '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/system-config-printer' /usr/bin/mkdir -p '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/system-config-printer/troubleshoot' /usr/bin/install -p -m 644 troubleshoot/base.py troubleshoot/CheckLocalServerPublishing.py troubleshoot/CheckNetworkServerSanity.py troubleshoot/CheckPPDSanity.py troubleshoot/CheckPrinterSanity.py troubleshoot/CheckSELinux.py troubleshoot/CheckUSBPermissions.py troubleshoot/ChooseNetworkPrinter.py troubleshoot/ChoosePrinter.py troubleshoot/DeviceListed.py troubleshoot/ErrorLogCheckpoint.py troubleshoot/ErrorLogFetch.py troubleshoot/ErrorLogParse.py troubleshoot/Locale.py troubleshoot/LocalOrRemote.py troubleshoot/NetworkCUPSPrinterShared.py troubleshoot/PrinterStateReasons.py troubleshoot/PrintTestPage.py troubleshoot/QueueNotEnabled.py troubleshoot/QueueRejectingJobs.py troubleshoot/RemoteAddress.py troubleshoot/SchedulerNotRunning.py troubleshoot/ServerFirewalled.py troubleshoot/Shrug.py troubleshoot/VerifyPackages.py troubleshoot/Welcome.py '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/system-config-printer/troubleshoot' /usr/bin/mkdir -p '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/system-config-printer/ui' /usr/bin/install -p -m 644 ui/AboutDialog.ui ui/ConnectDialog.ui ui/ConnectingDialog.ui ui/InstallDialog.ui ui/JobsWindow.ui ui/NewPrinterName.ui ui/NewPrinterWindow.ui ui/PrinterPropertiesDialog.ui ui/PrintersWindow.ui ui/ServerSettingsDialog.ui ui/SMBBrowseDialog.ui ui/statusicon_popupmenu.ui ui/WaitWindow.ui '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/system-config-printer/ui' /usr/bin/install -p -m 644 asyncconn.py asyncipp.py asyncpk1.py authconn.py config.py cupspk.py debug.py dnssdresolve.py errordialogs.py HIG.py firewallsettings.py gui.py gtkinklevel.py installpackage.py jobviewer.py killtimer.py monitor.py newprinter.py OpenPrintingRequest.py options.py optionwidgets.py PhysicalDevice.py ppdcache.py ppdippstr.py ppdsloader.py printerproperties.py probe_printer.py SearchCriterion.py serversettings.py smburi.py statereason.py timedops.py ToolbarSearchEntry.py userdefault.py '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/system-config-printer/.' /usr/bin/mkdir -p '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/system-config-printer/xml' /usr/bin/install -p -m 644 xml/preferreddrivers.rng xml/validate.py '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/system-config-printer/xml' /usr/bin/mkdir -p '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/system-config-printer/icons' /usr/bin/install -p -m 644 icons/i-network-printer.png '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/system-config-printer/icons' /usr/bin/mkdir -p '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/system-config-printer' /usr/bin/mkdir -p '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/system-config-printer/troubleshoot/' /usr/bin/install -p troubleshoot/__init__.py '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/system-config-printer/troubleshoot/' /usr/bin/install -p check-device-ids.py pysmb.py scp-dbus-service.py system-config-printer.py install-printerdriver.py applet.py '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/system-config-printer' /usr/bin/mkdir -p '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/dbus-1/services/' /usr/bin/install -p -m 644 dbus/org.fedoraproject.Config.Printing.service '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/dbus-1/services/' /usr/bin/mkdir -p '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/lib/systemd/system' /usr/bin/install -p -m 644 udev/configure-printer@.service '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/lib/systemd/system' /usr/bin/mkdir -p '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/lib/udev' /usr/bin/install -p udev/udev-configure-printer '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/lib/udev' /usr/bin/mkdir -p '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/lib/udev' /usr/bin/install -p udev/udev-add-printer '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/lib/udev' /usr/bin/mkdir -p '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/lib/udev/rules.d' /usr/bin/install -p -m 644 udev/70-printers.rules '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/lib/udev/rules.d' make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/system-config-printer-1.5.15' make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/system-config-printer-1.5.15' + cp -f hp-makeuri-mga /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/bin + cp -fv /home/pterjan/rpmbuild/SOURCES/mga_printer_custom.py /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/system-config-printer '/home/pterjan/rpmbuild/SOURCES/mga_printer_custom.py' -> '/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/system-config-printer/mga_printer_custom.py' + /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/var/run/udev-configure-printer + touch /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/var/run/udev-configure-printer/usb-uris + [[ /usr/bin/python3 =~ - ]] ++ /usr/bin/python3 -c 'import sys; sys.stdout.write('\''{0.major}{0.minor}'\''.format(sys.version_info))' + python_version=310 + '[' 310 -ge 39 ']' + py39_byte_compile /usr/bin/python3 '%{buildroot}/usr/lib/python3.10/site-packages/cupshelpers' + python_binary='env PYTHONHASHSEED=0 /usr/bin/python3' + bytecode_compilation_path='%{buildroot}/usr/lib/python3.10/site-packages/cupshelpers' + env PYTHONHASHSEED=0 /usr/bin/python3 -s -B -m compileall -o 0 -o 1 -s /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64 -p / --hardlink-dupes '%{buildroot}/usr/lib/python3.10/site-packages/cupshelpers' Listing '%{buildroot}/usr/lib/python3.10/site-packages/cupshelpers'... Can't list '%{buildroot}/usr/lib/python3.10/site-packages/cupshelpers' + [[ /usr/bin/python3 =~ - ]] ++ /usr/bin/python3 -c 'import sys; sys.stdout.write('\''{0.major}{0.minor}'\''.format(sys.version_info))' + python_version=310 + '[' 310 -ge 39 ']' + py39_byte_compile /usr/bin/python3 '%{buildroot}%{datadir}/system-config-printer' + python_binary='env PYTHONHASHSEED=0 /usr/bin/python3' + bytecode_compilation_path='%{buildroot}%{datadir}/system-config-printer' + env PYTHONHASHSEED=0 /usr/bin/python3 -s -B -m compileall -o 0 -o 1 -s /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64 -p / --hardlink-dupes '%{buildroot}%{datadir}/system-config-printer' Listing '%{buildroot}%{datadir}/system-config-printer'... Can't list '%{buildroot}%{datadir}/system-config-printer' + /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/lib/cups/backend + cp -f /home/pterjan/rpmbuild/SOURCES/mga_backend /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/lib/cups/backend + /usr/lib/rpm/find-lang.sh /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64 system-config-printer + /usr/bin/find-debuginfo -j16 --strict-build-id -m -i --build-id-seed 1.5.15-4.mga9 --unique-debug-suffix -1.5.15-4.mga9.x86_64 --unique-debug-src-base system-config-printer-1.5.15-4.mga9.x86_64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 110000000 -S debugsourcefiles.list /home/pterjan/rpmbuild/BUILD/system-config-printer-1.5.15 extracting debug info from /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/bin/hp-makeuri-mga extracting debug info from /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/lib/udev/udev-configure-printer gdb-add-index: No index was created for /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/bin/hp-makeuri-mga gdb-add-index: [Was there no debuginfo? Was there already an index?] dwz: Too few files for multifile optimization original debug info size: 140kB, size after compression: 140kB /usr/bin/sepdebugcrcfix: Updated 1 CRC32s, 1 CRC32s did match. 122 blocks + /usr/lib/rpm/check-buildroot + '[' -n '' ']' + /usr/share/spec-helper/clean_files + '[' -n '' ']' + /usr/share/spec-helper/compress_files .xz + '[' -n '' ']' + /usr/share/spec-helper/relink_symlinks + '[' -n '' ']' + /usr/share/spec-helper/clean_perl + '[' -n '' ']' + /usr/share/spec-helper/lib_symlinks + '[' -n '' ']' + /usr/share/spec-helper/gprintify + '[' -n '' ']' + /usr/share/spec-helper/fix_mo + '[' -n '' ']' + /usr/share/spec-helper/fix_pamd + '[' -n '' ']' + /usr/share/spec-helper/remove_info_dir + '[' -n '' ']' + /usr/share/spec-helper/fix_eol + '[' -n '' ']' + /usr/share/spec-helper/check_desktop_files /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/applications/system-config-printer.desktop: hint: value "System;Settings;HardwareSettings;Printing;GTK;" for key "Categories" in group "Desktop Entry" contains more than one main category; application might appear more than once in the application menu + '[' -n '' ']' + /usr/share/spec-helper/check_elf_files + /usr/lib/rpm/check-rpaths + /usr/lib/rpm/brp-remove-la-files + /usr/lib/rpm/redhat/brp-mangle-shebangs mangling shebang in /usr/bin/scp-dbus-service from /bin/sh to #!/usr/bin/sh mangling shebang in /usr/bin/install-printerdriver from /bin/sh to #!/usr/bin/sh mangling shebang in /usr/bin/system-config-printer-applet from /bin/sh to #!/usr/bin/sh mangling shebang in /usr/bin/system-config-printer from /bin/sh to #!/usr/bin/sh + /usr/lib/rpm/redhat/brp-python-hardlink Processing files: system-config-printer-1.5.15-4.mga9.x86_64 Executing(%doc): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.TvKjNU + umask 022 + cd /home/pterjan/rpmbuild/BUILD + cd system-config-printer-1.5.15 + DOCDIR=/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/doc/system-config-printer + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/doc/system-config-printer + cp -pr ChangeLog /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/doc/system-config-printer + RPM_EC=0 ++ jobs -p + exit 0 Provides: application() application(system-config-printer.desktop) metainfo() metainfo(system-config-printer.appdata.xml) printerdrake system-config-printer = 1.5.15-4.mga9 system-config-printer(x86-64) = 1.5.15-4.mga9 Requires(interp): /bin/sh /bin/sh Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires(post): /bin/sh Requires(postun): /bin/sh Requires: libc.so.6()(64bit) libc.so.6(GLIBC_2.2.5)(64bit) libc.so.6(GLIBC_2.34)(64bit) libhpmud.so.0()(64bit) typelib(GLib) typelib(GObject) typelib(Gdk) = 3.0 typelib(GdkPixbuf) = 2.0 typelib(Gtk) = 3.0 typelib(PackageKitGlib) = 1.0 typelib(Pango) typelib(Polkit) = 1.0 Conflicts: kdeutils4-printer-applet Obsoletes: desktop-printing printerdrake Recommends: python3dist(pysmbc) Processing files: system-config-printer-udev-1.5.15-4.mga9.x86_64 Provides: config(system-config-printer-udev) = 1.5.15-4.mga9 system-config-printer-udev = 1.5.15-4.mga9 system-config-printer-udev(x86-64) = 1.5.15-4.mga9 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires(post): rpm-helper >= 0.24.8-1 Requires(preun): rpm-helper >= 0.24.8-1 Requires: libc.so.6()(64bit) libc.so.6(GLIBC_2.14)(64bit) libc.so.6(GLIBC_2.2.5)(64bit) libc.so.6(GLIBC_2.3)(64bit) libc.so.6(GLIBC_2.3.4)(64bit) libc.so.6(GLIBC_2.33)(64bit) libc.so.6(GLIBC_2.34)(64bit) libc.so.6(GLIBC_2.4)(64bit) libcups.so.2()(64bit) libdbus-1.so.3()(64bit) libdbus-1.so.3(LIBDBUS_1_3)(64bit) libglib-2.0.so.0()(64bit) libudev.so.1()(64bit) libudev.so.1(LIBUDEV_183)(64bit) libusb-1.0.so.0()(64bit) Conflicts: cups < 1.4.2-6 Obsoletes: hal-cups-utils <= 0.6.20 Processing files: system-config-printer-libs-1.5.15-4.mga9.noarch error: File not found: /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/lib/python3.10/site-packages/cupshelpers error: File not found: /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/lib/python3.10/site-packages/*.egg-info Executing(%doc): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.zvQcVw + umask 022 + cd /home/pterjan/rpmbuild/BUILD + cd system-config-printer-1.5.15 + DOCDIR=/home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/doc/system-config-printer-libs + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/doc/system-config-printer-libs + cp -pr COPYING /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/share/doc/system-config-printer-libs + RPM_EC=0 ++ jobs -p + exit 0 RPM build warnings: line 46: It's not recommended to have unversioned Obsoletes: Obsoletes: desktop-printing line 47: It's not recommended to have unversioned Obsoletes: Obsoletes: printerdrake RPM build errors: File not found: /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/lib/python3.10/site-packages/cupshelpers File not found: /home/pterjan/rpmbuild/BUILDROOT/system-config-printer-1.5.15-4.mga9.x86_64/usr/lib/python3.10/site-packages/*.egg-info I: [iurt_root_command] ERROR: chroot