D: [iurt_root_command] chroot Installing /home/pterjan/rpmbuild/SRPMS/perl-POE-Component-Server-SimpleHTTP-2.280.0-3.mga9.src.rpm Building target platforms: noarch Building for target noarch Executing(%prep): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.U8czh2 + umask 022 + cd /home/pterjan/rpmbuild/BUILD + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + cd /home/pterjan/rpmbuild/BUILD + rm -rf POE-Component-Server-SimpleHTTP-2.28 + /usr/bin/gzip -dc /home/pterjan/rpmbuild/SOURCES/POE-Component-Server-SimpleHTTP-2.28.tar.gz + /usr/bin/tar -xof - + STATUS=0 + '[' 0 -ne 0 ']' + cd POE-Component-Server-SimpleHTTP-2.28 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + RPM_EC=0 ++ jobs -p + exit 0 Executing(%build): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.ZeqRen + umask 022 + cd /home/pterjan/rpmbuild/BUILD + cd POE-Component-Server-SimpleHTTP-2.28 + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + /usr/bin/perl Makefile.PL INSTALLDIRS=vendor + yes n Do you want to test streaming ( requires POE::Component::Client::HTTP ) [y/N] [N] Do you want SSL support ( requires POE::Component::SSLify ) [y/N] [N] Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for POE::Component::Server::SimpleHTTP Writing MYMETA.yml and MYMETA.json + /usr/bin/make -O -j8 V=1 VERBOSE=1 cp lib/POE/Component/Server/SimpleHTTP/State.pm blib/lib/POE/Component/Server/SimpleHTTP/State.pm cp lib/POE/Component/Server/SimpleHTTP.pm blib/lib/POE/Component/Server/SimpleHTTP.pm cp lib/POE/Component/Server/SimpleHTTP/Connection.pm blib/lib/POE/Component/Server/SimpleHTTP/Connection.pm cp lib/POE/Component/Server/SimpleHTTP/Response.pm blib/lib/POE/Component/Server/SimpleHTTP/Response.pm Manifying 4 pod documents + RPM_EC=0 ++ jobs -p + exit 0 Executing(%install): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.Q19fff + umask 022 + cd /home/pterjan/rpmbuild/BUILD + '[' 1 -eq 1 ']' + '[' /home/pterjan/rpmbuild/BUILDROOT/perl-POE-Component-Server-SimpleHTTP-2.280.0-3.mga9.noarch '!=' / ']' + rm -rf /home/pterjan/rpmbuild/BUILDROOT/perl-POE-Component-Server-SimpleHTTP-2.280.0-3.mga9.noarch ++ dirname /home/pterjan/rpmbuild/BUILDROOT/perl-POE-Component-Server-SimpleHTTP-2.280.0-3.mga9.noarch + mkdir -p /home/pterjan/rpmbuild/BUILDROOT + mkdir /home/pterjan/rpmbuild/BUILDROOT/perl-POE-Component-Server-SimpleHTTP-2.280.0-3.mga9.noarch + cd POE-Component-Server-SimpleHTTP-2.28 + '[' 1 -eq 1 ']' + /usr/bin/make install DESTDIR=/home/pterjan/rpmbuild/BUILDROOT/perl-POE-Component-Server-SimpleHTTP-2.280.0-3.mga9.noarch 'INSTALL=/usr/bin/install -p' Manifying 4 pod documents Installing /home/pterjan/rpmbuild/BUILDROOT/perl-POE-Component-Server-SimpleHTTP-2.280.0-3.mga9.noarch/usr/share/perl5/vendor_perl/POE/Component/Server/SimpleHTTP.pm Installing /home/pterjan/rpmbuild/BUILDROOT/perl-POE-Component-Server-SimpleHTTP-2.280.0-3.mga9.noarch/usr/share/perl5/vendor_perl/POE/Component/Server/SimpleHTTP/Response.pm Installing /home/pterjan/rpmbuild/BUILDROOT/perl-POE-Component-Server-SimpleHTTP-2.280.0-3.mga9.noarch/usr/share/perl5/vendor_perl/POE/Component/Server/SimpleHTTP/State.pm Installing /home/pterjan/rpmbuild/BUILDROOT/perl-POE-Component-Server-SimpleHTTP-2.280.0-3.mga9.noarch/usr/share/perl5/vendor_perl/POE/Component/Server/SimpleHTTP/Connection.pm Installing /home/pterjan/rpmbuild/BUILDROOT/perl-POE-Component-Server-SimpleHTTP-2.280.0-3.mga9.noarch/usr/share/man/man3/POE::Component::Server::SimpleHTTP.3pm Installing /home/pterjan/rpmbuild/BUILDROOT/perl-POE-Component-Server-SimpleHTTP-2.280.0-3.mga9.noarch/usr/share/man/man3/POE::Component::Server::SimpleHTTP::Connection.3pm Installing /home/pterjan/rpmbuild/BUILDROOT/perl-POE-Component-Server-SimpleHTTP-2.280.0-3.mga9.noarch/usr/share/man/man3/POE::Component::Server::SimpleHTTP::Response.3pm Installing /home/pterjan/rpmbuild/BUILDROOT/perl-POE-Component-Server-SimpleHTTP-2.280.0-3.mga9.noarch/usr/share/man/man3/POE::Component::Server::SimpleHTTP::State.3pm Appending installation info to /home/pterjan/rpmbuild/BUILDROOT/perl-POE-Component-Server-SimpleHTTP-2.280.0-3.mga9.noarch/usr/lib64/perl5/perllocal.pod + /usr/bin/find-debuginfo -j16 --strict-build-id -m -i --build-id-seed 2.280.0-3.mga9 --unique-debug-suffix -2.280.0-3.mga9.noarch --unique-debug-src-base perl-POE-Component-Server-SimpleHTTP-2.280.0-3.mga9.noarch --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 50000000 -S debugsourcefiles.list /home/pterjan/rpmbuild/BUILD/POE-Component-Server-SimpleHTTP-2.28 + /usr/lib/rpm/check-buildroot + '[' -n '' ']' + /usr/share/spec-helper/clean_files + '[' -n '' ']' + /usr/share/spec-helper/compress_files .xz + '[' -n '' ']' + /usr/share/spec-helper/relink_symlinks + '[' -n '' ']' + /usr/share/spec-helper/clean_perl + '[' -n '' ']' + /usr/share/spec-helper/lib_symlinks + '[' -n '' ']' + /usr/share/spec-helper/gprintify + '[' -n '' ']' + /usr/share/spec-helper/fix_mo + '[' -n '' ']' + /usr/share/spec-helper/fix_pamd + '[' -n '' ']' + /usr/share/spec-helper/remove_info_dir + '[' -n '' ']' + /usr/share/spec-helper/fix_eol + '[' -n '' ']' + /usr/share/spec-helper/check_desktop_files + '[' -n '' ']' + /usr/share/spec-helper/check_elf_files + /usr/lib/rpm/check-rpaths + /usr/lib/rpm/brp-remove-la-files + /usr/lib/rpm/redhat/brp-mangle-shebangs + /usr/lib/rpm/redhat/brp-python-bytecompile '' 1 0 + /usr/lib/rpm/redhat/brp-python-hardlink Executing(%check): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.CDpsaA + umask 022 + cd /home/pterjan/rpmbuild/BUILD + cd POE-Component-Server-SimpleHTTP-2.28 + '[' 1 -eq 1 ']' + /usr/bin/make test PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl5.36.0" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ........... ok # GET http://pocosimpletest.com:33833/ HTTP/1.1 # Host: 127.0.0.1:33833 # Did not get DONE/CLOSE event for Wheel ID 3 from IP 127.0.0.1 at /home/pterjan/rpmbuild/BUILD/POE-Component-Server-SimpleHTTP-2.28/blib/lib/POE/Component/Server/SimpleHTTP.pm line 226. I had a problem posting to event TOP of session 1 for DIR handler '^/$'. As reported by Kernel: 'No such file or directory', perhaps the session name is spelled incorrectly for this handler? at /usr/share/perl5/vendor_perl/POE/Session.pm line 483. # Looks like your test exited with 22 before it could output anything. t/02_simple.t ............ Dubious, test returned 22 (wstat 5632, 0x1600) Failed 2/2 subtests # starting httpd6 # httpd6 started # Port is 42851 # webc_connected # GET http://pocosimpletest.com:42851/ HTTP/1.1 # Host: ::1:42851 # Did not get DONE/CLOSE event for Wheel ID 3 from IP ::1 at /home/pterjan/rpmbuild/BUILD/POE-Component-Server-SimpleHTTP-2.28/blib/lib/POE/Component/Server/SimpleHTTP.pm line 226. I had a problem posting to event TOP of session 1 for DIR handler '^/$'. As reported by Kernel: 'No such file or directory', perhaps the session name is spelled incorrectly for this handler? at /usr/share/perl5/vendor_perl/POE/Session.pm line 483. # Looks like your test exited with 22 before it could output anything. t/02_simple_ipv6.t ....... Dubious, test returned 22 (wstat 5632, 0x1600) Failed 2/2 subtests # HTTP/1.1 404 (Not Found) # Date: Fri, 29 Jul 2022 14:24:02 GMT # Content-Length: 13 # Content-Type: text/plain # # 404 Not Found t/03_bad_handler.t ....... ok # GEt http://pocosimpletest.com:45199/ HTTP/1.1 # Host: 127.0.0.1:45199 # Did not get DONE/CLOSE event for Wheel ID 3 from IP 127.0.0.1 at /home/pterjan/rpmbuild/BUILD/POE-Component-Server-SimpleHTTP-2.28/blib/lib/POE/Component/Server/SimpleHTTP.pm line 226. I had a problem posting to event TOP of session 1 for DIR handler '^/$'. As reported by Kernel: 'No such file or directory', perhaps the session name is spelled incorrectly for this handler? at /usr/share/perl5/vendor_perl/POE/Session.pm line 483. # Looks like your test exited with 22 before it could output anything. t/03_bad_request.t ....... Dubious, test returned 22 (wstat 5632, 0x1600) Failed 2/2 subtests Did not get DONE/CLOSE event for Wheel ID 3 from IP 127.0.0.1 at /home/pterjan/rpmbuild/BUILD/POE-Component-Server-SimpleHTTP-2.28/blib/lib/POE/Component/Server/SimpleHTTP.pm line 226. I had a problem posting to event TOP of session 1 for DIR handler '^/$'. As reported by Kernel: 'No such file or directory', perhaps the session name is spelled incorrectly for this handler? at /usr/share/perl5/vendor_perl/POE/Session.pm line 483. # Looks like your test exited with 22 before it could output anything. t/04_run_close.t ......... Dubious, test returned 22 (wstat 5632, 0x1600) Failed 16/16 subtests Did not get DONE/CLOSE event for Wheel ID 3 from IP 127.0.0.1 at /home/pterjan/rpmbuild/BUILD/POE-Component-Server-SimpleHTTP-2.28/blib/lib/POE/Component/Server/SimpleHTTP.pm line 226. I had a problem posting to event TOP of session 1 for DIR handler '^/$'. As reported by Kernel: 'No such file or directory', perhaps the session name is spelled incorrectly for this handler? at /usr/share/perl5/vendor_perl/POE/Session.pm line 483. # Looks like your test exited with 22 just after 1. t/04_run_keepalive.t ..... Dubious, test returned 22 (wstat 5632, 0x1600) Failed 13/14 subtests # POST http://pocosimpletest.com:43835/ HTTP/1.1 # Host: 127.0.0.1:43835 # Content-Length: 40 # # brother !~we need to get off this island Did not get DONE/CLOSE event for Wheel ID 3 from IP 127.0.0.1 at /home/pterjan/rpmbuild/BUILD/POE-Component-Server-SimpleHTTP-2.28/blib/lib/POE/Component/Server/SimpleHTTP.pm line 226. I had a problem posting to event TOP of session 1 for DIR handler '^/$'. As reported by Kernel: 'No such file or directory', perhaps the session name is spelled incorrectly for this handler? at /usr/share/perl5/vendor_perl/POE/Session.pm line 483. # Looks like your test exited with 22 before it could output anything. t/05_post.t .............. Dubious, test returned 22 (wstat 5632, 0x1600) Failed 4/4 subtests t/06_stream.t ............ skipped: POE::Component::Client::HTTP is required for this test t/author-pod-coverage.t .. skipped: these tests are for testing by the author t/author-pod-syntax.t .... skipped: these tests are for testing by the author Test Summary Report ------------------- t/02_simple.t (Wstat: 5632 (exited 22) Tests: 0 Failed: 0) Non-zero exit status: 22 Parse errors: Bad plan. You planned 2 tests but ran 0. t/02_simple_ipv6.t (Wstat: 5632 (exited 22) Tests: 0 Failed: 0) Non-zero exit status: 22 Parse errors: Bad plan. You planned 2 tests but ran 0. t/03_bad_request.t (Wstat: 5632 (exited 22) Tests: 0 Failed: 0) Non-zero exit status: 22 Parse errors: Bad plan. You planned 2 tests but ran 0. t/04_run_close.t (Wstat: 5632 (exited 22) Tests: 0 Failed: 0) Non-zero exit status: 22 Parse errors: Bad plan. You planned 16 tests but ran 0. t/04_run_keepalive.t (Wstat: 5632 (exited 22) Tests: 1 Failed: 0) Non-zero exit status: 22 Parse errors: Bad plan. You planned 14 tests but ran 1. t/05_post.t (Wstat: 5632 (exited 22) Tests: 0 Failed: 0) Non-zero exit status: 22 Parse errors: Bad plan. You planned 4 tests but ran 0. Files=11, Tests=8, 3 wallclock secs ( 0.03 usr 0.01 sys + 2.91 cusr 0.24 csys = 3.19 CPU) Result: FAIL Failed 6/11 test programs. 0/8 subtests failed. make: *** [Makefile:895: test_dynamic] Error 255 error: Bad exit status from /home/pterjan/rpmbuild/tmp/rpm-tmp.CDpsaA (%check) RPM build errors: Bad exit status from /home/pterjan/rpmbuild/tmp/rpm-tmp.CDpsaA (%check) I: [iurt_root_command] ERROR: chroot