D: [iurt_root_command] chroot
Installing /home/pterjan/rpmbuild/SRPMS/perl-PerlIO-gzip-0.200.0-2.mga7.src.rpm
Executing(%prep): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.DIhPI1
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ cd /home/pterjan/rpmbuild/BUILD
+ rm -rf PerlIO-gzip-0.20
+ /usr/bin/gzip -dc /home/pterjan/rpmbuild/SOURCES/PerlIO-gzip-0.20.tar.gz
+ /usr/bin/tar -xof -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd PerlIO-gzip-0.20
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ /usr/bin/cat /home/pterjan/rpmbuild/SOURCES/PerlIO-gzip-0.14-no_strict_warnings.patch
+ /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch
+ exit 0
Executing(%build): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.dWREPN
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd PerlIO-gzip-0.20
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for PerlIO::gzip
Writing MYMETA.yml and MYMETA.json
+ echo 'warning: %make is deprecated, try %make_build instead'
warning: %make is deprecated, try %make_build instead
+ /usr/bin/make -O -j4
cp gzip.pm blib/lib/PerlIO/gzip.pm
Running Mkbootstrap for gzip ()
chmod 644 "gzip.bs"
"/usr/bin/perl5.26.2" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644
"/usr/bin/perl5.26.2" "/usr/lib/perl5/5.26.2/ExtUtils/xsubpp"  -typemap '/usr/lib/perl5/5.26.2/ExtUtils/typemap'  gzip.xs > gzip.xsc
mv gzip.xsc gzip.c
gcc -c   -D_REENTRANT -D_GNU_SOURCE -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fwrapv -fno-strict-aliasing -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g   -DVERSION=\"0.20\" -DXS_VERSION=\"0.20\" -fPIC "-I/usr/lib/perl5/5.26.2/x86_64-linux-thread-multi/CORE"   gzip.c
rm -f blib/arch/auto/PerlIO/gzip/gzip.so
LD_RUN_PATH="/lib/../lib64" gcc  -lpthread -shared  -L/usr/local/lib64 -fstack-protector-strong gzip.o  -o blib/arch/auto/PerlIO/gzip/gzip.so  \
   -lz -lperl   \
  
chmod 755 blib/arch/auto/PerlIO/gzip/gzip.so
Manifying 1 pod document
+ exit 0
Executing(%install): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.hmWH0B
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' /home/pterjan/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.200.0-2.mga7.x86_64 '!=' / ']'
+ rm -rf /home/pterjan/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.200.0-2.mga7.x86_64
++ dirname /home/pterjan/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.200.0-2.mga7.x86_64
+ mkdir -p /home/pterjan/rpmbuild/BUILDROOT
+ mkdir /home/pterjan/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.200.0-2.mga7.x86_64
+ cd PerlIO-gzip-0.20
+ '[' 1 -eq 1 ']'
+ /usr/bin/make install DESTDIR=/home/pterjan/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.200.0-2.mga7.x86_64 'INSTALL=/usr/bin/install -p'
"/usr/bin/perl5.26.2" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644
Manifying 1 pod document
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /home/pterjan/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.200.0-2.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/x86_64-linux-thread-multi/auto/PerlIO/gzip/gzip.so
Installing /home/pterjan/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.200.0-2.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/x86_64-linux-thread-multi/PerlIO/gzip.pm
Installing /home/pterjan/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.200.0-2.mga7.x86_64/usr/share/man/man3/PerlIO::gzip.3pm
Appending installation info to /home/pterjan/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.200.0-2.mga7.x86_64/usr/lib/perl5/5.26.2/x86_64-linux-thread-multi/perllocal.pod
+ /usr/lib/rpm/find-debuginfo.sh -j4 -m -i --build-id-seed 0.200.0-2.mga7 --unique-debug-suffix -0.200.0-2.mga7.x86_64 --unique-debug-src-base perl-PerlIO-gzip-0.200.0-2.mga7.x86_64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 110000000 -S debugsourcefiles.list /home/pterjan/rpmbuild/BUILD/PerlIO-gzip-0.20

extracting debug info from /home/pterjan/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.200.0-2.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/x86_64-linux-thread-multi/auto/PerlIO/gzip/gzip.so
objcopy: unable to copy file '/home/pterjan/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.200.0-2.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/x86_64-linux-thread-multi/auto/PerlIO/gzip/gzip.so'; reason: Permission denied
/usr/lib/rpm/sepdebugcrcfix: Updated 1 CRC32s, 0 CRC32s did match.
158 blocks
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/compress_files .xz
+ '[' -n '' ']'
+ /usr/share/spec-helper/relink_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_perl
+ '[' -n '' ']'
+ /usr/share/spec-helper/lib_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/gprintify
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_mo
+ '[' -n '' ']'
+ /usr/share/spec-helper/translate_menu
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_pamd
+ '[' -n '' ']'
+ /usr/share/spec-helper/remove_info_dir
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_eol
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_elf_files
+ '[' 1 -eq 1 ']'
+ /usr/lib/rpm/brp-python-bytecompile /usr/bin/python 1
+ /usr/lib/rpm/brp-python-hardlink
Executing(%check): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.rWV5Zr
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd PerlIO-gzip-0.20
+ '[' 1 -eq 1 ']'
+ echo 'warning: %make is deprecated, try %make_build instead'
warning: %make is deprecated, try %make_build instead
+ /usr/bin/make -O -j4 test
"/usr/bin/perl5.26.2" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644
PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl5.26.2" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/read.t ... ok
t/write.t .. ok
All tests successful.
Files=2, Tests=561,  1 wallclock secs ( 0.07 usr  0.01 sys +  0.53 cusr  0.02 csys =  0.63 CPU)
Result: PASS
+ exit 0
Processing files: perl-PerlIO-gzip-0.200.0-2.mga7.x86_64
Executing(%doc): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.JPCgAj
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd PerlIO-gzip-0.20
+ DOCDIR=/home/pterjan/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.200.0-2.mga7.x86_64/usr/share/doc/perl-PerlIO-gzip
+ export LC_ALL=C
+ LC_ALL=C
+ export DOCDIR
+ /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.200.0-2.mga7.x86_64/usr/share/doc/perl-PerlIO-gzip
+ cp -pr Changes /home/pterjan/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.200.0-2.mga7.x86_64/usr/share/doc/perl-PerlIO-gzip
+ cp -pr META.yml /home/pterjan/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.200.0-2.mga7.x86_64/usr/share/doc/perl-PerlIO-gzip
+ cp -pr MYMETA.yml /home/pterjan/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.200.0-2.mga7.x86_64/usr/share/doc/perl-PerlIO-gzip
+ cp -pr README /home/pterjan/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.200.0-2.mga7.x86_64/usr/share/doc/perl-PerlIO-gzip
+ exit 0
Provides: perl(PerlIO::gzip) = 0.200.0 perl-PerlIO-gzip = 0.200.0-2.mga7 perl-PerlIO-gzip(x86-64) = 0.200.0-2.mga7
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: libc.so.6()(64bit) libc.so.6(GLIBC_2.2.5)(64bit) libc.so.6(GLIBC_2.4)(64bit) libperl.so.5.26()(64bit) libpthread.so.0()(64bit) libpthread.so.0(GLIBC_2.2.5)(64bit) libz.so.1()(64bit) perl >= 0:5.008 perl(XSLoader) perl-base >= 2:5.26.2
Processing files: perl-PerlIO-gzip-debugsource-0.200.0-2.mga7.x86_64
Provides: perl-PerlIO-gzip-debugsource = 0.200.0-2.mga7 perl-PerlIO-gzip-debugsource(x86-64) = 0.200.0-2.mga7
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Processing files: perl-PerlIO-gzip-debuginfo-0.200.0-2.mga7.x86_64
Provides: debuginfo(build-id) = e57ddbd63cd929b0586a7909d424de7e2efe0998 perl-PerlIO-gzip-debuginfo = 0.200.0-2.mga7 perl-PerlIO-gzip-debuginfo(x86-64) = 0.200.0-2.mga7
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Recommends: perl-PerlIO-gzip-debugsource(x86-64) = 0.200.0-2.mga7
Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/pterjan/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.200.0-2.mga7.x86_64
Wrote: /home/pterjan/rpmbuild/RPMS/x86_64/perl-PerlIO-gzip-0.200.0-2.mga7.x86_64.rpm
Wrote: /home/pterjan/rpmbuild/RPMS/x86_64/perl-PerlIO-gzip-debugsource-0.200.0-2.mga7.x86_64.rpm
Wrote: /home/pterjan/rpmbuild/RPMS/x86_64/perl-PerlIO-gzip-debuginfo-0.200.0-2.mga7.x86_64.rpm
Executing(%clean): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.hD6Ejc
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd PerlIO-gzip-0.20
+ /usr/bin/rm -rf /home/pterjan/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.200.0-2.mga7.x86_64
+ exit 0
Executing(--clean): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.nGsU44
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ rm -rf PerlIO-gzip-0.20
+ exit 0
D: [iurt_root_command] Success!