D: [iurt_root_command] chroot
Installing /home/pterjan/rpmbuild/SRPMS/perl-Inline-0.800.0-6.mga7.src.rpm
Executing(%prep): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.YYgZDf
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ cd /home/pterjan/rpmbuild/BUILD
+ rm -rf Inline-0.80
+ /usr/bin/gzip -dc /home/pterjan/rpmbuild/SOURCES/Inline-0.80.tar.gz
+ /usr/bin/tar -xof -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd Inline-0.80
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ exit 0
Executing(%build): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.ilw6Cr
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd Inline-0.80
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Inline
Writing MYMETA.yml and MYMETA.json
+ echo 'warning: %make is deprecated, try %make_build instead'
warning: %make is deprecated, try %make_build instead
+ /usr/bin/make -O -j4
cp lib/Inline/Foo.pm blib/lib/Inline/Foo.pm
cp lib/Inline/denter.pm blib/lib/Inline/denter.pm
cp lib/Inline/MakeMaker.pm blib/lib/Inline/MakeMaker.pm
cp lib/Inline.pod blib/lib/Inline.pod
cp lib/Inline/FAQ.pod blib/lib/Inline/FAQ.pod
cp lib/Inline.pm blib/lib/Inline.pm
cp lib/Inline/API.pod blib/lib/Inline/API.pod
cp lib/Inline/Support.pod blib/lib/Inline/Support.pod
cp lib/Inline/MakeMaker/Changes blib/lib/Inline/MakeMaker/Changes
Manifying 4 pod documents
+ exit 0
Executing(%install): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.ku6I2E
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' /home/pterjan/rpmbuild/BUILDROOT/perl-Inline-0.800.0-6.mga7.x86_64 '!=' / ']'
+ rm -rf /home/pterjan/rpmbuild/BUILDROOT/perl-Inline-0.800.0-6.mga7.x86_64
++ dirname /home/pterjan/rpmbuild/BUILDROOT/perl-Inline-0.800.0-6.mga7.x86_64
+ mkdir -p /home/pterjan/rpmbuild/BUILDROOT
+ mkdir /home/pterjan/rpmbuild/BUILDROOT/perl-Inline-0.800.0-6.mga7.x86_64
+ cd Inline-0.80
+ '[' 1 -eq 1 ']'
+ echo 'warning: %makeinstall_std is deprecated, try %make_install instead'
warning: %makeinstall_std is deprecated, try %make_install instead
+ make DESTDIR=/home/pterjan/rpmbuild/BUILDROOT/perl-Inline-0.800.0-6.mga7.x86_64 install
Manifying 4 pod documents
Installing /home/pterjan/rpmbuild/BUILDROOT/perl-Inline-0.800.0-6.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/Inline.pm
Installing /home/pterjan/rpmbuild/BUILDROOT/perl-Inline-0.800.0-6.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/Inline.pod
Installing /home/pterjan/rpmbuild/BUILDROOT/perl-Inline-0.800.0-6.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/Inline/Support.pod
Installing /home/pterjan/rpmbuild/BUILDROOT/perl-Inline-0.800.0-6.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/Inline/API.pod
Installing /home/pterjan/rpmbuild/BUILDROOT/perl-Inline-0.800.0-6.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/Inline/FAQ.pod
Installing /home/pterjan/rpmbuild/BUILDROOT/perl-Inline-0.800.0-6.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/Inline/MakeMaker.pm
Installing /home/pterjan/rpmbuild/BUILDROOT/perl-Inline-0.800.0-6.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/Inline/denter.pm
Installing /home/pterjan/rpmbuild/BUILDROOT/perl-Inline-0.800.0-6.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/Inline/Foo.pm
Installing /home/pterjan/rpmbuild/BUILDROOT/perl-Inline-0.800.0-6.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/Inline/MakeMaker/Changes
Installing /home/pterjan/rpmbuild/BUILDROOT/perl-Inline-0.800.0-6.mga7.x86_64/usr/share/man/man3/Inline::Support.3pm
Installing /home/pterjan/rpmbuild/BUILDROOT/perl-Inline-0.800.0-6.mga7.x86_64/usr/share/man/man3/Inline::FAQ.3pm
Installing /home/pterjan/rpmbuild/BUILDROOT/perl-Inline-0.800.0-6.mga7.x86_64/usr/share/man/man3/Inline::API.3pm
Installing /home/pterjan/rpmbuild/BUILDROOT/perl-Inline-0.800.0-6.mga7.x86_64/usr/share/man/man3/Inline.3pm
Appending installation info to /home/pterjan/rpmbuild/BUILDROOT/perl-Inline-0.800.0-6.mga7.x86_64/usr/lib/perl5/5.26.2/x86_64-linux-thread-multi/perllocal.pod
+ /usr/lib/rpm/find-debuginfo.sh -j4 -m -i --build-id-seed 0.800.0-6.mga7 --unique-debug-suffix -0.800.0-6.mga7.x86_64 --unique-debug-src-base perl-Inline-0.800.0-6.mga7.x86_64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 110000000 -S debugsourcefiles.list /home/pterjan/rpmbuild/BUILD/Inline-0.80

+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/compress_files .xz
+ '[' -n '' ']'
+ /usr/share/spec-helper/relink_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_perl
+ '[' -n '' ']'
+ /usr/share/spec-helper/lib_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/gprintify
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_mo
+ '[' -n '' ']'
+ /usr/share/spec-helper/translate_menu
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_pamd
+ '[' -n '' ']'
+ /usr/share/spec-helper/remove_info_dir
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_eol
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_elf_files
+ '[' 1 -eq 1 ']'
+ /usr/lib/rpm/brp-python-bytecompile /usr/bin/python 1
+ /usr/lib/rpm/brp-python-hardlink
Executing(%check): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.y8XSZT
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd Inline-0.80
+ '[' 1 -eq 1 ']'
+ make test
PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl5.26.2" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/000-require-modules.t .. ok
t/01usages.t ............. ok
t/02config.t ............. ok
t/03errors.t ............. ok
t/04create.t ............. ok
Skipping - couldn't load the Inline::Files module
t/05files.t .............. ok
t/06rewrite_config.t ..... ok
t/07rewrite2_config.t .... ok
t/release-pod-syntax.t ... skipped: these tests are for release candidate testing
All tests successful.
Files=9, Tests=25,  2 wallclock secs ( 0.04 usr  0.02 sys +  1.90 cusr  0.14 csys =  2.10 CPU)
Result: PASS
+ exit 0
Processing files: perl-Inline-0.800.0-6.mga7.noarch
Executing(%doc): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.IdRCDe
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd Inline-0.80
+ DOCDIR=/home/pterjan/rpmbuild/BUILDROOT/perl-Inline-0.800.0-6.mga7.x86_64/usr/share/doc/perl-Inline
+ export LC_ALL=C
+ LC_ALL=C
+ export DOCDIR
+ /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILDROOT/perl-Inline-0.800.0-6.mga7.x86_64/usr/share/doc/perl-Inline
+ cp -pr Changes /home/pterjan/rpmbuild/BUILDROOT/perl-Inline-0.800.0-6.mga7.x86_64/usr/share/doc/perl-Inline
+ cp -pr META.json /home/pterjan/rpmbuild/BUILDROOT/perl-Inline-0.800.0-6.mga7.x86_64/usr/share/doc/perl-Inline
+ cp -pr META.yml /home/pterjan/rpmbuild/BUILDROOT/perl-Inline-0.800.0-6.mga7.x86_64/usr/share/doc/perl-Inline
+ cp -pr MYMETA.yml /home/pterjan/rpmbuild/BUILDROOT/perl-Inline-0.800.0-6.mga7.x86_64/usr/share/doc/perl-Inline
+ cp -pr README /home/pterjan/rpmbuild/BUILDROOT/perl-Inline-0.800.0-6.mga7.x86_64/usr/share/doc/perl-Inline
+ exit 0
Provides: perl(Foo::Tester) = 0.20.0 perl(Inline) = 0.800.0 perl(Inline::Foo) = 0.800.0 perl(Inline::MakeMaker) = 0.800.0 perl(Inline::denter) perl-Inline = 0.800.0-6.mga7
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: perl(Carp) perl(Config) perl(Cwd) perl(Digest::MD5) perl(Exporter) perl(ExtUtils::MakeMaker) perl(Fcntl) perl(File::Spec) >= 0.800.0 perl(File::Spec::Unix) perl(Inline) perl(Inline::denter) perl(base) perl(strict) perl-base >= 2:5.26.2
Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/pterjan/rpmbuild/BUILDROOT/perl-Inline-0.800.0-6.mga7.x86_64
Wrote: /home/pterjan/rpmbuild/RPMS/noarch/perl-Inline-0.800.0-6.mga7.noarch.rpm
Executing(%clean): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.OHVWqB
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd Inline-0.80
+ /usr/bin/rm -rf /home/pterjan/rpmbuild/BUILDROOT/perl-Inline-0.800.0-6.mga7.x86_64
+ exit 0
Executing(--clean): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.848hhY
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ rm -rf Inline-0.80
+ exit 0
D: [iurt_root_command] Success!