D: [iurt_root_command] chroot
Installing /home/pterjan/rpmbuild/SRPMS/perl-Crypt-Simple-0.60.0-10.mga7.src.rpm
Executing(%prep): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.uZRTQ8
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ cd /home/pterjan/rpmbuild/BUILD
+ rm -rf Crypt-Simple-0.06
+ /usr/bin/gzip -dc /home/pterjan/rpmbuild/SOURCES/Crypt-Simple-0.06.tar.gz
+ /usr/bin/tar -xof -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd Crypt-Simple-0.06
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ exit 0
Executing(%build): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.nemGKX
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd Crypt-Simple-0.06
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Crypt::Simple
Writing MYMETA.yml and MYMETA.json
+ echo 'warning: %make is deprecated, try %make_build instead'
warning: %make is deprecated, try %make_build instead
+ /usr/bin/make -O -j4
cp Simple.pm blib/lib/Crypt/Simple.pm
Manifying 1 pod document
+ exit 0
Executing(%install): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.qaf4fN
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' /home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Simple-0.60.0-10.mga7.x86_64 '!=' / ']'
+ rm -rf /home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Simple-0.60.0-10.mga7.x86_64
++ dirname /home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Simple-0.60.0-10.mga7.x86_64
+ mkdir -p /home/pterjan/rpmbuild/BUILDROOT
+ mkdir /home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Simple-0.60.0-10.mga7.x86_64
+ cd Crypt-Simple-0.06
+ '[' 1 -eq 1 ']'
+ echo 'warning: %makeinstall_std is deprecated, try %make_install instead'
warning: %makeinstall_std is deprecated, try %make_install instead
+ make DESTDIR=/home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Simple-0.60.0-10.mga7.x86_64 install
Manifying 1 pod document
Installing /home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Simple-0.60.0-10.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/Crypt/Simple.pm
Installing /home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Simple-0.60.0-10.mga7.x86_64/usr/share/man/man3/Crypt::Simple.3pm
Appending installation info to /home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Simple-0.60.0-10.mga7.x86_64/usr/lib/perl5/5.26.2/x86_64-linux-thread-multi/perllocal.pod
+ /usr/lib/rpm/find-debuginfo.sh -j4 -m -i --build-id-seed 0.60.0-10.mga7 --unique-debug-suffix -0.60.0-10.mga7.x86_64 --unique-debug-src-base perl-Crypt-Simple-0.60.0-10.mga7.x86_64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 110000000 -S debugsourcefiles.list /home/pterjan/rpmbuild/BUILD/Crypt-Simple-0.06

+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/compress_files .xz
+ '[' -n '' ']'
+ /usr/share/spec-helper/relink_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_perl
+ '[' -n '' ']'
+ /usr/share/spec-helper/lib_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/gprintify
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_mo
+ '[' -n '' ']'
+ /usr/share/spec-helper/translate_menu
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_pamd
+ '[' -n '' ']'
+ /usr/share/spec-helper/remove_info_dir
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_eol
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_elf_files
+ '[' 1 -eq 1 ']'
+ /usr/lib/rpm/brp-python-bytecompile /usr/bin/python 1
+ /usr/lib/rpm/brp-python-hardlink
Executing(%check): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.zF4VtD
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd Crypt-Simple-0.06
+ '[' 1 -eq 1 ']'
+ echo 'warning: %make is deprecated, try %make_build instead'
warning: %make is deprecated, try %make_build instead
+ /usr/bin/make -O -j4 test
PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl5.26.2" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/complex.t ..... ok
t/file.t ........ ok
t/multi.t ....... ok
t/passfile.t .... ok
t/passphrase.t .. ok
t/single.t ...... ok
All tests successful.
Files=6, Tests=31,  1 wallclock secs ( 0.03 usr  0.00 sys +  0.28 cusr  0.05 csys =  0.36 CPU)
Result: PASS
+ exit 0
Processing files: perl-Crypt-Simple-0.60.0-10.mga7.noarch
Executing(%doc): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.unFnFu
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd Crypt-Simple-0.06
+ DOCDIR=/home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Simple-0.60.0-10.mga7.x86_64/usr/share/doc/perl-Crypt-Simple
+ export LC_ALL=C
+ LC_ALL=C
+ export DOCDIR
+ /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Simple-0.60.0-10.mga7.x86_64/usr/share/doc/perl-Crypt-Simple
+ cp -pr README /home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Simple-0.60.0-10.mga7.x86_64/usr/share/doc/perl-Crypt-Simple
+ exit 0
Provides: perl(Crypt::Simple) = 0.60.0 perl-Crypt-Simple = 0.60.0-10.mga7
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: perl(Carp) perl(Compress::Zlib) perl(Crypt::Blowfish) perl(Digest::MD5) perl(FreezeThaw) perl(MIME::Base64) perl(strict) perl-base >= 2:5.26.2
Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Simple-0.60.0-10.mga7.x86_64
Wrote: /home/pterjan/rpmbuild/RPMS/noarch/perl-Crypt-Simple-0.60.0-10.mga7.noarch.rpm
Executing(%clean): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.twev2l
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd Crypt-Simple-0.06
+ /usr/bin/rm -rf /home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Simple-0.60.0-10.mga7.x86_64
+ exit 0
Executing(--clean): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.0xiFqd
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ rm -rf Crypt-Simple-0.06
+ exit 0
D: [iurt_root_command] Success!