D: [iurt_root_command] chroot Installing /home/pterjan/rpmbuild/SRPMS/po4a-0.52-1.mga7.src.rpm Executing(%prep): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.oWAPSU + umask 022 + cd /home/pterjan/rpmbuild/BUILD + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + cd /home/pterjan/rpmbuild/BUILD + rm -rf po4a-0.52 + /usr/bin/gzip -dc /home/pterjan/rpmbuild/SOURCES/po4a-0.52.tar.gz + /usr/bin/tar -xof - + STATUS=0 + '[' 0 -ne 0 ']' + cd po4a-0.52 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + exit 0 Executing(%build): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.VoV2kC + umask 022 + cd /home/pterjan/rpmbuild/BUILD + cd po4a-0.52 + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + /usr/bin/perl Build.PL installdirs=vendor Checking prerequisites... test_requires: ! Unicode::GCString is not installed recommends: * Unicode::GCString is not installed ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions of the modules indicated above before proceeding with this installation Run 'Build installdeps' to install missing prerequisites. Created MYMETA.yml and MYMETA.json Creating new 'Build' script for 'po4a' version '0.52' + ./Build Created META.yml and META.json (1498 entries) Discard blib/man/ca/man1/po4a-build.xml (10 of 59 strings; only 16.94% translated; need 80%). Discard blib/man/ca/man1/po4aman-display-po.xml (6 of 25 strings; only 24% translated; need 80%). Discard blib/man/ca/man1/po4apod-display-po.xml (6 of 23 strings; only 26.08% translated; need 80%). Discard blib/man/ca/man1/po4a.1p.pod (87 of 186 strings; only 46.77% translated; need 80%). Discard blib/man/ca/man1/po4a-gettextize.1p.pod (41 of 52 strings; only 78.84% translated; need 80%). Discard blib/man/ca/man1/po4a-updatepo.1p.pod (38 of 55 strings; only 69.09% translated; need 80%). Discard blib/man/ca/man1/msguntypot.1p.pod (9 of 36 strings; only 25% translated; need 80%). Discard blib/man/ca/man5/po4a-build.conf.5.pod (4 of 104 strings; only 3.84% translated; need 80%). Discard blib/man/ca/man7/po4a-runtime.7.pod (3 of 44 strings; only 6.81% translated; need 80%). Discard blib/man/ca/man3/Locale::Po4a::AsciiDoc.3pm.pod (11 of 36 strings; only 30.55% translated; need 80%). Discard blib/man/ca/man3/Locale::Po4a::Chooser.3pm.pod (12 of 16 strings; only 75% translated; need 80%). Discard blib/man/ca/man3/Locale::Po4a::Common.3pm.pod (21 of 32 strings; only 65.62% translated; need 80%). Discard blib/man/ca/man3/Locale::Po4a::Halibut.3pm.pod (12 of 20 strings; only 60% translated; need 80%). Discard blib/man/ca/man3/Locale::Po4a::Ini.3pm.pod (8 of 14 strings; only 57.14% translated; need 80%). Discard blib/man/ca/man3/Locale::Po4a::Man.3pm.pod (64 of 113 strings; only 56.63% translated; need 80%). Discard blib/man/ca/man3/Locale::Po4a::Po.3pm.pod (79 of 99 strings; only 79.79% translated; need 80%). Discard blib/man/ca/man3/Locale::Po4a::Sgml.3pm.pod (44 of 60 strings; only 73.33% translated; need 80%). Discard blib/man/ca/man3/Locale::Po4a::TeX.3pm.pod (76 of 121 strings; only 62.8% translated; need 80%). Discard blib/man/ca/man3/Locale::Po4a::Text.3pm.pod (18 of 42 strings; only 42.85% translated; need 80%). Discard blib/man/ca/man3/Locale::Po4a::Wml.3pm.pod (11 of 15 strings; only 73.33% translated; need 80%). Discard blib/man/ca/man3/Locale::Po4a::Xhtml.3pm.pod (15 of 21 strings; only 71.42% translated; need 80%). Discard blib/man/ca/man3/Locale::Po4a::Xml.3pm.pod (120 of 166 strings; only 72.28% translated; need 80%). Discard blib/man/es/man3/Locale::Po4a::Chooser.3pm.pod (12 of 16 strings; only 75% translated; need 80%). Discard blib/man/it/man5/po4a-build.conf.5.pod (51 of 104 strings; only 49.03% translated; need 80%). Discard blib/man/it/man7/po4a.7.pod (129 of 277 strings; only 46.57% translated; need 80%). Discard blib/man/it/man7/po4a-runtime.7.pod (6 of 44 strings; only 13.63% translated; need 80%). Discard blib/man/it/man3/Locale::Po4a::AsciiDoc.3pm.pod (23 of 36 strings; only 63.88% translated; need 80%). Discard blib/man/it/man3/Locale::Po4a::Common.3pm.pod (21 of 32 strings; only 65.62% translated; need 80%). Discard blib/man/it/man3/Locale::Po4a::Man.3pm.pod (37 of 113 strings; only 32.74% translated; need 80%). Discard blib/man/it/man3/Locale::Po4a::Po.3pm.pod (34 of 99 strings; only 34.34% translated; need 80%). Discard blib/man/it/man3/Locale::Po4a::TeX.3pm.pod (75 of 121 strings; only 61.98% translated; need 80%). Discard blib/man/it/man3/Locale::Po4a::Text.3pm.pod (23 of 42 strings; only 54.76% translated; need 80%). Discard blib/man/it/man3/Locale::Po4a::TransTractor.3pm.pod (30 of 153 strings; only 19.6% translated; need 80%). Discard blib/man/it/man3/Locale::Po4a::Xhtml.3pm.pod (16 of 21 strings; only 76.19% translated; need 80%). Discard blib/man/it/man3/Locale::Po4a::Xml.3pm.pod (90 of 166 strings; only 54.21% translated; need 80%). Discard blib/man/nb/man1/po4a-build.xml (14 of 59 strings; only 23.72% translated; need 80%). Discard blib/man/nb/man1/po4aman-display-po.xml (3 of 25 strings; only 12% translated; need 80%). Discard blib/man/nb/man1/po4apod-display-po.xml (3 of 23 strings; only 13.04% translated; need 80%). Discard blib/man/nb/man1/po4a.1p.pod (2 of 186 strings; only 1.07% translated; need 80%). Discard blib/man/nb/man1/po4a-gettextize.1p.pod (1 of 52 strings; only 1.92% translated; need 80%). Discard blib/man/nb/man1/po4a-normalize.1p.pod (1 of 31 strings; only 3.22% translated; need 80%). Discard blib/man/nb/man1/po4a-translate.1p.pod (1 of 53 strings; only 1.88% translated; need 80%). Discard blib/man/nb/man1/po4a-updatepo.1p.pod (1 of 55 strings; only 1.81% translated; need 80%). Discard blib/man/nb/man1/msguntypot.1p.pod (1 of 36 strings; only 2.77% translated; need 80%). Discard blib/man/nb/man5/po4a-build.conf.5.pod (0 of 104 strings; only 0% translated; need 80%). Discard blib/man/nb/man7/po4a.7.pod (0 of 277 strings; only 0% translated; need 80%). Discard blib/man/nb/man7/po4a-runtime.7.pod (0 of 44 strings; only 0% translated; need 80%). Discard blib/man/nb/man3/Locale::Po4a::AsciiDoc.3pm.pod (1 of 36 strings; only 2.77% translated; need 80%). Discard blib/man/nb/man3/Locale::Po4a::BibTeX.3pm.pod (1 of 15 strings; only 6.66% translated; need 80%). Discard blib/man/nb/man3/Locale::Po4a::Chooser.3pm.pod (1 of 16 strings; only 6.25% translated; need 80%). Discard blib/man/nb/man3/Locale::Po4a::Common.3pm.pod (1 of 32 strings; only 3.12% translated; need 80%). Discard blib/man/nb/man3/Locale::Po4a::Dia.3pm.pod (1 of 18 strings; only 5.55% translated; need 80%). Discard blib/man/nb/man3/Locale::Po4a::Docbook.3pm.pod (1 of 15 strings; only 6.66% translated; need 80%). Discard blib/man/nb/man3/Locale::Po4a::Guide.3pm.pod (1 of 16 strings; only 6.25% translated; need 80%). Discard blib/man/nb/man3/Locale::Po4a::Halibut.3pm.pod (1 of 20 strings; only 5% translated; need 80%). Discard blib/man/nb/man3/Locale::Po4a::Ini.3pm.pod (1 of 14 strings; only 7.14% translated; need 80%). Discard blib/man/nb/man3/Locale::Po4a::KernelHelp.3pm.pod (1 of 13 strings; only 7.69% translated; need 80%). Discard blib/man/nb/man3/Locale::Po4a::LaTeX.3pm.pod (1 of 14 strings; only 7.14% translated; need 80%). Discard blib/man/nb/man3/Locale::Po4a::Man.3pm.pod (1 of 113 strings; only 0.88% translated; need 80%). Discard blib/man/nb/man3/Locale::Po4a::Po.3pm.pod (1 of 99 strings; only 1.01% translated; need 80%). Discard blib/man/nb/man3/Locale::Po4a::Pod.3pm.pod (1 of 42 strings; only 2.38% translated; need 80%). Discard blib/man/nb/man3/Locale::Po4a::Sgml.3pm.pod (1 of 60 strings; only 1.66% translated; need 80%). Discard blib/man/nb/man3/Locale::Po4a::TeX.3pm.pod (1 of 121 strings; only 0.82% translated; need 80%). Discard blib/man/nb/man3/Locale::Po4a::Texinfo.3pm.pod (1 of 15 strings; only 6.66% translated; need 80%). Discard blib/man/nb/man3/Locale::Po4a::Text.3pm.pod (1 of 42 strings; only 2.38% translated; need 80%). Discard blib/man/nb/man3/Locale::Po4a::TransTractor.3pm.pod (1 of 153 strings; only 0.65% translated; need 80%). Discard blib/man/nb/man3/Locale::Po4a::Wml.3pm.pod (1 of 15 strings; only 6.66% translated; need 80%). Discard blib/man/nb/man3/Locale::Po4a::Xhtml.3pm.pod (1 of 21 strings; only 4.76% translated; need 80%). Discard blib/man/nb/man3/Locale::Po4a::Xml.3pm.pod (1 of 166 strings; only 0.6% translated; need 80%). Discard blib/man/pl/man3/Locale::Po4a::AsciiDoc.3pm.pod (12 of 36 strings; only 33.33% translated; need 80%). Discard blib/man/pl/man3/Locale::Po4a::Chooser.3pm.pod (12 of 16 strings; only 75% translated; need 80%). Discard blib/man/pt/man3/Locale::Po4a::AsciiDoc.3pm.pod (12 of 36 strings; only 33.33% translated; need 80%). Discard blib/man/pt/man3/Locale::Po4a::Chooser.3pm.pod (12 of 16 strings; only 75% translated; need 80%). Discard blib/man/ru/man5/po4a-build.conf.5.pod (7 of 104 strings; only 6.73% translated; need 80%). Discard blib/man/ru/man7/po4a.7.pod (7 of 277 strings; only 2.52% translated; need 80%). Discard blib/man/ru/man7/po4a-runtime.7.pod (3 of 44 strings; only 6.81% translated; need 80%). Discard blib/man/ru/man3/Locale::Po4a::AsciiDoc.3pm.pod (7 of 36 strings; only 19.44% translated; need 80%). Discard blib/man/ru/man3/Locale::Po4a::BibTeX.3pm.pod (6 of 15 strings; only 40% translated; need 80%). Discard blib/man/ru/man3/Locale::Po4a::Chooser.3pm.pod (8 of 16 strings; only 50% translated; need 80%). Discard blib/man/ru/man3/Locale::Po4a::Common.3pm.pod (6 of 32 strings; only 18.75% translated; need 80%). Discard blib/man/ru/man3/Locale::Po4a::Dia.3pm.pod (8 of 18 strings; only 44.44% translated; need 80%). Discard blib/man/ru/man3/Locale::Po4a::Docbook.3pm.pod (8 of 15 strings; only 53.33% translated; need 80%). Discard blib/man/ru/man3/Locale::Po4a::Guide.3pm.pod (8 of 16 strings; only 50% translated; need 80%). Discard blib/man/ru/man3/Locale::Po4a::Halibut.3pm.pod (7 of 20 strings; only 35% translated; need 80%). Discard blib/man/ru/man3/Locale::Po4a::Ini.3pm.pod (7 of 14 strings; only 50% translated; need 80%). Discard blib/man/ru/man3/Locale::Po4a::KernelHelp.3pm.pod (7 of 13 strings; only 53.84% translated; need 80%). Discard blib/man/ru/man3/Locale::Po4a::LaTeX.3pm.pod (7 of 14 strings; only 50% translated; need 80%). Discard blib/man/ru/man3/Locale::Po4a::Po.3pm.pod (15 of 99 strings; only 15.15% translated; need 80%). Discard blib/man/ru/man3/Locale::Po4a::Pod.3pm.pod (12 of 42 strings; only 28.57% translated; need 80%). Discard blib/man/ru/man3/Locale::Po4a::Sgml.3pm.pod (13 of 60 strings; only 21.66% translated; need 80%). Discard blib/man/ru/man3/Locale::Po4a::TeX.3pm.pod (14 of 121 strings; only 11.57% translated; need 80%). Discard blib/man/ru/man3/Locale::Po4a::Texinfo.3pm.pod (7 of 15 strings; only 46.66% translated; need 80%). Discard blib/man/ru/man3/Locale::Po4a::Text.3pm.pod (7 of 42 strings; only 16.66% translated; need 80%). Discard blib/man/ru/man3/Locale::Po4a::TransTractor.3pm.pod (6 of 153 strings; only 3.92% translated; need 80%). Discard blib/man/ru/man3/Locale::Po4a::Wml.3pm.pod (6 of 15 strings; only 40% translated; need 80%). Discard blib/man/ru/man3/Locale::Po4a::Xhtml.3pm.pod (9 of 21 strings; only 42.85% translated; need 80%). Discard blib/man/ru/man3/Locale::Po4a::Xml.3pm.pod (37 of 166 strings; only 22.28% translated; need 80%). msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. msggrep: warning: Locale charset "ANSI_X3.4-1968" is different from input file charset "UTF-8". Output of 'msggrep' might be incorrect. Possible workarounds are: - Set LC_ALL to a locale with encoding UTF-8. - Convert the translation catalog to ASCII using 'msgconv', then apply 'msggrep', then convert back to UTF-8 using 'msgconv'. Note: Writing po4a-build.1 Note: Writing po4aman-display-po.1 Note: Writing po4apod-display-po.1 Note: Writing po4a-build.1 Note: Writing po4aman-display-po.1 Note: Writing po4apod-display-po.1 Note: Writing po4a-build.1 Note: Writing po4aman-display-po.1 Note: Writing po4apod-display-po.1 Note: Writing po4a-build.1 Note: Writing po4aman-display-po.1 Note: Writing po4apod-display-po.1 Note: Writing po4a-build.1 Note: Writing po4aman-display-po.1 Note: Writing po4apod-display-po.1 Note: Writing po4a-build.1 Note: Writing po4aman-display-po.1 Note: Writing po4apod-display-po.1 Note: Writing po4a-build.1 Note: Writing po4aman-display-po.1 Note: Writing po4apod-display-po.1 Note: Writing po4a-build.1 Note: Writing po4aman-display-po.1 Note: Writing po4apod-display-po.1 Note: Writing po4a-build.1 Note: Writing po4aman-display-po.1 Note: Writing po4apod-display-po.1 Note: Writing po4a-build.1 Note: Writing po4aman-display-po.1 Note: Writing po4apod-display-po.1 XX po/bin/po4a.pot uptodate. XX po/bin/af.po uptodate. XX po/bin/ca.po uptodate. XX po/bin/cs.po uptodate. XX po/bin/da.po uptodate. XX po/bin/de.po uptodate. XX po/bin/eo.po uptodate. XX po/bin/es.po uptodate. XX po/bin/et.po uptodate. XX po/bin/eu.po uptodate. XX po/bin/fr.po uptodate. XX po/bin/hr.po uptodate. XX po/bin/id.po uptodate. XX po/bin/it.po uptodate. XX po/bin/ja.po uptodate. XX po/bin/kn.po uptodate. XX po/bin/ko.po uptodate. XX po/bin/nb.po uptodate. XX po/bin/nl.po uptodate. XX po/bin/pl.po uptodate. XX po/bin/pt.po uptodate. XX po/bin/pt_BR.po uptodate. XX po/bin/ru.po uptodate. XX po/bin/sl.po uptodate. XX po/bin/sv.po uptodate. XX po/bin/uk.po uptodate. XX po/bin/vi.po uptodate. XX po/bin/zh_CN.po uptodate. XX po/bin/zh_HK.po uptodate. po/bin (pot: 30126) af: po/bin/af.po: 22 translated messages, 32 fuzzy translations, 157 untranslated messages. ca: po/bin/ca.po: 142 translated messages, 17 fuzzy translations, 52 untranslated messages. cs: po/bin/cs.po: 199 translated messages, 6 fuzzy translations, 6 untranslated messages. da: po/bin/da.po:12: warning: header field 'Language' still has the initial default value po/bin/da.po: 198 translated messages, 6 fuzzy translations, 7 untranslated messages. de: po/bin/de.po: 211 translated messages. eo: po/bin/eo.po: 198 translated messages, 6 fuzzy translations, 7 untranslated messages. es: po/bin/es.po: 202 translated messages, 5 fuzzy translations, 4 untranslated messages. et: po/bin/et.po: 198 translated messages, 6 fuzzy translations, 7 untranslated messages. eu: po/bin/eu.po: 198 translated messages, 6 fuzzy translations, 7 untranslated messages. fr: po/bin/fr.po: 211 translated messages. hr: po/bin/hr.po: 29 translated messages, 19 fuzzy translations, 163 untranslated messages. id: po/bin/id.po: 204 translated messages, 3 fuzzy translations, 4 untranslated messages. it: po/bin/it.po: 211 translated messages. ja: po/bin/ja.po: 204 translated messages, 3 fuzzy translations, 4 untranslated messages. kn: po/bin/kn.po: 29 translated messages, 36 fuzzy translations, 146 untranslated messages. ko: po/bin/ko.po: 77 translated messages, 3 fuzzy translations, 131 untranslated messages. nb: po/bin/nb.po: 66 translated messages, 32 fuzzy translations, 113 untranslated messages. nl: po/bin/nl.po: 205 translated messages, 3 fuzzy translations, 3 untranslated messages. pl: po/bin/pl.po: 197 translated messages, 6 fuzzy translations, 8 untranslated messages. pt: po/bin/pt.po: 182 translated messages, 6 fuzzy translations, 23 untranslated messages. pt_BR: po/bin/pt_BR.po: 211 translated messages. ru: po/bin/ru.po: 211 translated messages. sl: po/bin/sl.po: 198 translated messages, 6 fuzzy translations, 7 untranslated messages. sv: po/bin/sv.po: 182 translated messages, 6 fuzzy translations, 23 untranslated messages. uk: po/bin/uk.po: 211 translated messages. vi: po/bin/vi.po: 204 translated messages, 3 fuzzy translations, 4 untranslated messages. zh_CN: po/bin/zh_CN.po: 11 translated messages, 13 fuzzy translations, 187 untranslated messages. zh_HK: po/bin/zh_HK.po: 15 translated messages, 25 fuzzy translations, 171 untranslated messages. po/pod (pot: 298206) ca: po/pod/ca.po: 860 translated messages, 128 fuzzy translations, 510 untranslated messages. de: po/pod/de.po: 1498 translated messages. es: po/pod/es.po: 1425 translated messages, 56 fuzzy translations, 17 untranslated messages. fr: po/pod/fr.po: 1458 translated messages, 28 fuzzy translations, 12 untranslated messages. it: po/pod/it.po: 826 translated messages, 672 untranslated messages. ja: po/pod/ja.po: 1450 translated messages, 32 fuzzy translations, 16 untranslated messages. nb: po/pod/nb.po: 12 translated messages, 1486 untranslated messages. pl: po/pod/pl.po: 1394 translated messages, 68 fuzzy translations, 36 untranslated messages. pt: po/pod/pt.po: 1398 translated messages, 68 fuzzy translations, 32 untranslated messages. pt_BR: po/pod/pt_BR.po: 1493 translated messages, 5 untranslated messages. ru: po/pod/ru.po: 430 translated messages, 48 fuzzy translations, 1020 untranslated messages. + exit 0 Executing(%install): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.S3lEiX + umask 022 + cd /home/pterjan/rpmbuild/BUILD + '[' 1 -eq 1 ']' + '[' /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64 '!=' / ']' + rm -rf /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64 ++ dirname /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64 + mkdir -p /home/pterjan/rpmbuild/BUILDROOT + mkdir /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64 + cd po4a-0.52 + '[' 1 -eq 1 ']' + ./Build install destdir=/home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64 Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/Locale/Po4a/Xml.pm Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/Locale/Po4a/Xhtml.pm Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/Locale/Po4a/Wml.pm Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/Locale/Po4a/TransTractor.pm Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/Locale/Po4a/Text.pm Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/Locale/Po4a/Texinfo.pm Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/Locale/Po4a/TeX.pm Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/Locale/Po4a/Sgml.pm Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/Locale/Po4a/RubyDoc.pm Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/Locale/Po4a/Pod.pm Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/Locale/Po4a/Po.pm Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/Locale/Po4a/Man.pm Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/Locale/Po4a/LaTeX.pm Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/Locale/Po4a/KernelHelp.pm Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/Locale/Po4a/Ini.pm Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/Locale/Po4a/Halibut.pm Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/Locale/Po4a/Guide.pm Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/Locale/Po4a/Docbook.pm Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/Locale/Po4a/Dia.pm Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/Locale/Po4a/Common.pm Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/Locale/Po4a/Chooser.pm Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/Locale/Po4a/BibTeX.pm Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/Locale/Po4a/AsciiDoc.pm Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man7/po4a.7.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man7/po4a-runtime.7.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man5/po4a-build.conf.5.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man3/Locale::Po4a::Xml.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man3/Locale::Po4a::Xhtml.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man3/Locale::Po4a::Wml.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man3/Locale::Po4a::TransTractor.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man3/Locale::Po4a::Text.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man3/Locale::Po4a::Texinfo.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man3/Locale::Po4a::TeX.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man3/Locale::Po4a::Sgml.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man3/Locale::Po4a::RubyDoc.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man3/Locale::Po4a::Pod.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man3/Locale::Po4a::Po.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man3/Locale::Po4a::Man.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man3/Locale::Po4a::LaTeX.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man3/Locale::Po4a::KernelHelp.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man3/Locale::Po4a::Ini.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man3/Locale::Po4a::Halibut.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man3/Locale::Po4a::Guide.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man3/Locale::Po4a::Docbook.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man3/Locale::Po4a::Dia.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man3/Locale::Po4a::Common.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man3/Locale::Po4a::Chooser.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man3/Locale::Po4a::BibTeX.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man3/Locale::Po4a::AsciiDoc.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man1/po4apod-display-po.1.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man1/po4aman-display-po.1.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man1/po4a-build.1.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man1/po4a.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man1/po4a-updatepo.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man1/po4a-translate.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man1/po4a-normalize.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man1/po4a-gettextize.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/man1/msguntypot.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ru/man3/Locale::Po4a::Man.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ru/man1/po4apod-display-po.1.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ru/man1/po4aman-display-po.1.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ru/man1/po4a-build.1.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ru/man1/po4a.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ru/man1/po4a-updatepo.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ru/man1/po4a-translate.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ru/man1/po4a-normalize.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ru/man1/po4a-gettextize.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ru/man1/msguntypot.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt_BR/man3/Locale::Po4a::Xml.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt_BR/man3/Locale::Po4a::Xhtml.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt_BR/man3/Locale::Po4a::Wml.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt_BR/man3/Locale::Po4a::TransTractor.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt_BR/man3/Locale::Po4a::Text.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt_BR/man3/Locale::Po4a::Texinfo.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt_BR/man3/Locale::Po4a::TeX.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt_BR/man3/Locale::Po4a::Sgml.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt_BR/man3/Locale::Po4a::Pod.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt_BR/man3/Locale::Po4a::Po.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt_BR/man3/Locale::Po4a::Man.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt_BR/man3/Locale::Po4a::LaTeX.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt_BR/man3/Locale::Po4a::KernelHelp.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt_BR/man3/Locale::Po4a::Ini.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt_BR/man3/Locale::Po4a::Halibut.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt_BR/man3/Locale::Po4a::Guide.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt_BR/man3/Locale::Po4a::Docbook.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt_BR/man3/Locale::Po4a::Dia.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt_BR/man3/Locale::Po4a::Common.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt_BR/man3/Locale::Po4a::Chooser.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt_BR/man3/Locale::Po4a::BibTeX.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt_BR/man3/Locale::Po4a::AsciiDoc.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt_BR/man7/po4a.7.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt_BR/man7/po4a-runtime.7.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt_BR/man5/po4a-build.conf.5.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt_BR/man1/po4apod-display-po.1.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt_BR/man1/po4aman-display-po.1.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt_BR/man1/po4a-build.1.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt_BR/man1/po4a.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt_BR/man1/po4a-updatepo.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt_BR/man1/po4a-translate.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt_BR/man1/po4a-normalize.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt_BR/man1/po4a-gettextize.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt_BR/man1/msguntypot.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt/man3/Locale::Po4a::Xml.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt/man3/Locale::Po4a::Xhtml.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt/man3/Locale::Po4a::Wml.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt/man3/Locale::Po4a::TransTractor.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt/man3/Locale::Po4a::Text.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt/man3/Locale::Po4a::Texinfo.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt/man3/Locale::Po4a::TeX.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt/man3/Locale::Po4a::Sgml.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt/man3/Locale::Po4a::Pod.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt/man3/Locale::Po4a::Po.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt/man3/Locale::Po4a::Man.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt/man3/Locale::Po4a::LaTeX.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt/man3/Locale::Po4a::KernelHelp.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt/man3/Locale::Po4a::Ini.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt/man3/Locale::Po4a::Halibut.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt/man3/Locale::Po4a::Guide.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt/man3/Locale::Po4a::Docbook.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt/man3/Locale::Po4a::Dia.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt/man3/Locale::Po4a::Common.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt/man3/Locale::Po4a::BibTeX.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt/man7/po4a.7.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt/man7/po4a-runtime.7.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt/man5/po4a-build.conf.5.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt/man1/po4apod-display-po.1.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt/man1/po4aman-display-po.1.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt/man1/po4a-build.1.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt/man1/po4a.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt/man1/po4a-updatepo.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt/man1/po4a-translate.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt/man1/po4a-normalize.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt/man1/po4a-gettextize.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pt/man1/msguntypot.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pl/man3/Locale::Po4a::Xml.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pl/man3/Locale::Po4a::Xhtml.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pl/man3/Locale::Po4a::Wml.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pl/man3/Locale::Po4a::TransTractor.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pl/man3/Locale::Po4a::Text.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pl/man3/Locale::Po4a::Texinfo.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pl/man3/Locale::Po4a::TeX.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pl/man3/Locale::Po4a::Sgml.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pl/man3/Locale::Po4a::Pod.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pl/man3/Locale::Po4a::Po.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pl/man3/Locale::Po4a::Man.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pl/man3/Locale::Po4a::LaTeX.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pl/man3/Locale::Po4a::KernelHelp.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pl/man3/Locale::Po4a::Ini.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pl/man3/Locale::Po4a::Halibut.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pl/man3/Locale::Po4a::Guide.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pl/man3/Locale::Po4a::Docbook.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pl/man3/Locale::Po4a::Dia.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pl/man3/Locale::Po4a::Common.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pl/man3/Locale::Po4a::BibTeX.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pl/man7/po4a.7.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pl/man7/po4a-runtime.7.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pl/man5/po4a-build.conf.5.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pl/man1/po4apod-display-po.1.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pl/man1/po4aman-display-po.1.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pl/man1/po4a-build.1.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pl/man1/po4a.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pl/man1/po4a-updatepo.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pl/man1/po4a-translate.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pl/man1/po4a-normalize.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pl/man1/po4a-gettextize.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/pl/man1/msguntypot.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ja/man3/Locale::Po4a::Xml.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ja/man3/Locale::Po4a::Xhtml.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ja/man3/Locale::Po4a::Wml.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ja/man3/Locale::Po4a::TransTractor.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ja/man3/Locale::Po4a::Text.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ja/man3/Locale::Po4a::Texinfo.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ja/man3/Locale::Po4a::TeX.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ja/man3/Locale::Po4a::Sgml.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ja/man3/Locale::Po4a::Pod.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ja/man3/Locale::Po4a::Po.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ja/man3/Locale::Po4a::Man.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ja/man3/Locale::Po4a::LaTeX.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ja/man3/Locale::Po4a::KernelHelp.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ja/man3/Locale::Po4a::Ini.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ja/man3/Locale::Po4a::Halibut.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ja/man3/Locale::Po4a::Guide.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ja/man3/Locale::Po4a::Docbook.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ja/man3/Locale::Po4a::Dia.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ja/man3/Locale::Po4a::Common.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ja/man3/Locale::Po4a::Chooser.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ja/man3/Locale::Po4a::BibTeX.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ja/man3/Locale::Po4a::AsciiDoc.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ja/man7/po4a.7.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ja/man7/po4a-runtime.7.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ja/man5/po4a-build.conf.5.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ja/man1/po4apod-display-po.1.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ja/man1/po4aman-display-po.1.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ja/man1/po4a-build.1.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ja/man1/po4a.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ja/man1/po4a-updatepo.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ja/man1/po4a-translate.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ja/man1/po4a-normalize.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ja/man1/po4a-gettextize.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ja/man1/msguntypot.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/it/man3/Locale::Po4a::Wml.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/it/man3/Locale::Po4a::Texinfo.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/it/man3/Locale::Po4a::Sgml.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/it/man3/Locale::Po4a::Pod.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/it/man3/Locale::Po4a::LaTeX.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/it/man3/Locale::Po4a::KernelHelp.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/it/man3/Locale::Po4a::Ini.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/it/man3/Locale::Po4a::Halibut.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/it/man3/Locale::Po4a::Guide.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/it/man3/Locale::Po4a::Docbook.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/it/man3/Locale::Po4a::Dia.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/it/man3/Locale::Po4a::Chooser.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/it/man3/Locale::Po4a::BibTeX.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/it/man1/po4apod-display-po.1.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/it/man1/po4aman-display-po.1.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/it/man1/po4a-build.1.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/it/man1/po4a.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/it/man1/po4a-updatepo.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/it/man1/po4a-translate.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/it/man1/po4a-normalize.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/it/man1/po4a-gettextize.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/it/man1/msguntypot.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/fr/man3/Locale::Po4a::Xml.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/fr/man3/Locale::Po4a::Xhtml.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/fr/man3/Locale::Po4a::Wml.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/fr/man3/Locale::Po4a::TransTractor.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/fr/man3/Locale::Po4a::Text.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/fr/man3/Locale::Po4a::Texinfo.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/fr/man3/Locale::Po4a::TeX.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/fr/man3/Locale::Po4a::Sgml.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/fr/man3/Locale::Po4a::Pod.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/fr/man3/Locale::Po4a::Po.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/fr/man3/Locale::Po4a::Man.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/fr/man3/Locale::Po4a::LaTeX.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/fr/man3/Locale::Po4a::KernelHelp.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/fr/man3/Locale::Po4a::Ini.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/fr/man3/Locale::Po4a::Halibut.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/fr/man3/Locale::Po4a::Guide.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/fr/man3/Locale::Po4a::Docbook.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/fr/man3/Locale::Po4a::Dia.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/fr/man3/Locale::Po4a::Common.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/fr/man3/Locale::Po4a::Chooser.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/fr/man3/Locale::Po4a::BibTeX.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/fr/man3/Locale::Po4a::AsciiDoc.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/fr/man7/po4a.7.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/fr/man7/po4a-runtime.7.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/fr/man5/po4a-build.conf.5.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/fr/man1/po4apod-display-po.1.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/fr/man1/po4aman-display-po.1.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/fr/man1/po4a-build.1.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/fr/man1/po4a.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/fr/man1/po4a-updatepo.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/fr/man1/po4a-translate.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/fr/man1/po4a-normalize.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/fr/man1/po4a-gettextize.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/fr/man1/msguntypot.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/es/man3/Locale::Po4a::Xml.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/es/man3/Locale::Po4a::Xhtml.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/es/man3/Locale::Po4a::Wml.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/es/man3/Locale::Po4a::TransTractor.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/es/man3/Locale::Po4a::Text.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/es/man3/Locale::Po4a::Texinfo.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/es/man3/Locale::Po4a::TeX.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/es/man3/Locale::Po4a::Sgml.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/es/man3/Locale::Po4a::Pod.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/es/man3/Locale::Po4a::Po.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/es/man3/Locale::Po4a::Man.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/es/man3/Locale::Po4a::LaTeX.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/es/man3/Locale::Po4a::KernelHelp.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/es/man3/Locale::Po4a::Ini.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/es/man3/Locale::Po4a::Halibut.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/es/man3/Locale::Po4a::Guide.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/es/man3/Locale::Po4a::Docbook.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/es/man3/Locale::Po4a::Dia.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/es/man3/Locale::Po4a::Common.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/es/man3/Locale::Po4a::BibTeX.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/es/man3/Locale::Po4a::AsciiDoc.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/es/man7/po4a.7.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/es/man7/po4a-runtime.7.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/es/man5/po4a-build.conf.5.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/es/man1/po4apod-display-po.1.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/es/man1/po4aman-display-po.1.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/es/man1/po4a-build.1.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/es/man1/po4a.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/es/man1/po4a-updatepo.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/es/man1/po4a-translate.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/es/man1/po4a-normalize.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/es/man1/po4a-gettextize.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/es/man1/msguntypot.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/de/man3/Locale::Po4a::Xml.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/de/man3/Locale::Po4a::Xhtml.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/de/man3/Locale::Po4a::Wml.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/de/man3/Locale::Po4a::TransTractor.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/de/man3/Locale::Po4a::Text.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/de/man3/Locale::Po4a::Texinfo.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/de/man3/Locale::Po4a::TeX.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/de/man3/Locale::Po4a::Sgml.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/de/man3/Locale::Po4a::Pod.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/de/man3/Locale::Po4a::Po.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/de/man3/Locale::Po4a::Man.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/de/man3/Locale::Po4a::LaTeX.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/de/man3/Locale::Po4a::KernelHelp.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/de/man3/Locale::Po4a::Ini.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/de/man3/Locale::Po4a::Halibut.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/de/man3/Locale::Po4a::Guide.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/de/man3/Locale::Po4a::Docbook.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/de/man3/Locale::Po4a::Dia.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/de/man3/Locale::Po4a::Common.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/de/man3/Locale::Po4a::Chooser.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/de/man3/Locale::Po4a::BibTeX.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/de/man3/Locale::Po4a::AsciiDoc.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/de/man7/po4a.7.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/de/man7/po4a-runtime.7.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/de/man5/po4a-build.conf.5.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/de/man1/po4apod-display-po.1.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/de/man1/po4aman-display-po.1.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/de/man1/po4a-build.1.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/de/man1/po4a.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/de/man1/po4a-updatepo.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/de/man1/po4a-translate.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/de/man1/po4a-normalize.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/de/man1/po4a-gettextize.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/de/man1/msguntypot.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ca/man3/Locale::Po4a::TransTractor.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ca/man3/Locale::Po4a::Texinfo.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ca/man3/Locale::Po4a::Pod.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ca/man3/Locale::Po4a::LaTeX.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ca/man3/Locale::Po4a::KernelHelp.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ca/man3/Locale::Po4a::Guide.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ca/man3/Locale::Po4a::Docbook.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ca/man3/Locale::Po4a::Dia.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ca/man3/Locale::Po4a::BibTeX.3pm.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ca/man7/po4a.7.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ca/man1/po4a-translate.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/man/ca/man1/po4a-normalize.1p.gz Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/locale/zh_HK/LC_MESSAGES/po4a.mo Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/locale/zh_CN/LC_MESSAGES/po4a.mo Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/locale/vi/LC_MESSAGES/po4a.mo Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/locale/uk/LC_MESSAGES/po4a.mo Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/locale/sv/LC_MESSAGES/po4a.mo Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/locale/sl/LC_MESSAGES/po4a.mo Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/locale/ru/LC_MESSAGES/po4a.mo Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/locale/pt_BR/LC_MESSAGES/po4a.mo Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/locale/pt/LC_MESSAGES/po4a.mo Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/locale/pl/LC_MESSAGES/po4a.mo Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/locale/nl/LC_MESSAGES/po4a.mo Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/locale/nb/LC_MESSAGES/po4a.mo Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/locale/ko/LC_MESSAGES/po4a.mo Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/locale/kn/LC_MESSAGES/po4a.mo Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/locale/ja/LC_MESSAGES/po4a.mo Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/locale/it/LC_MESSAGES/po4a.mo Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/locale/id/LC_MESSAGES/po4a.mo Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/locale/hr/LC_MESSAGES/po4a.mo Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/locale/fr/LC_MESSAGES/po4a.mo Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/locale/eu/LC_MESSAGES/po4a.mo Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/locale/et/LC_MESSAGES/po4a.mo Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/locale/es/LC_MESSAGES/po4a.mo Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/locale/eo/LC_MESSAGES/po4a.mo Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/locale/de/LC_MESSAGES/po4a.mo Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/locale/da/LC_MESSAGES/po4a.mo Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/locale/cs/LC_MESSAGES/po4a.mo Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/locale/ca/LC_MESSAGES/po4a.mo Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/locale/af/LC_MESSAGES/po4a.mo Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/bin/po4a-build Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/bin/po4apod-display-po Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/bin/po4aman-display-po Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/bin/msguntypot Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/bin/po4a-updatepo Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/bin/po4a-translate Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/bin/po4a-normalize Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/bin/po4a-gettextize Installing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/bin/po4a Writing /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/x86_64-linux-thread-multi/auto/po4a/.packlist + /usr/lib/rpm/find-lang.sh /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64 po4a --with-man --all-name + /usr/lib/rpm/find-debuginfo.sh -j4 -m -i --build-id-seed 0.52-1.mga7 --unique-debug-suffix -0.52-1.mga7.x86_64 --unique-debug-src-base po4a-0.52-1.mga7.x86_64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 110000000 -S debugsourcefiles.list /home/pterjan/rpmbuild/BUILD/po4a-0.52 + '[' -n '' ']' + /usr/share/spec-helper/clean_files + '[' -n '' ']' + /usr/share/spec-helper/compress_files .xz + '[' -n '' ']' + /usr/share/spec-helper/relink_symlinks + '[' -n '' ']' + /usr/share/spec-helper/clean_perl + '[' -n '' ']' + /usr/share/spec-helper/lib_symlinks + '[' -n '' ']' + /usr/share/spec-helper/gprintify + '[' -n '' ']' + /usr/share/spec-helper/fix_mo + '[' -n '' ']' + /usr/share/spec-helper/translate_menu + '[' -n '' ']' + /usr/share/spec-helper/fix_pamd + '[' -n '' ']' + /usr/share/spec-helper/remove_info_dir + '[' -n '' ']' + /usr/share/spec-helper/fix_eol + '[' -n '' ']' + /usr/share/spec-helper/check_elf_files + '[' 1 -eq 1 ']' + /usr/lib/rpm/brp-python-bytecompile /usr/bin/python 1 + /usr/lib/rpm/brp-python-hardlink Processing files: po4a-0.52-1.mga7.noarch Executing(%doc): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.hQmz6n + umask 022 + cd /home/pterjan/rpmbuild/BUILD + cd po4a-0.52 + DOCDIR=/home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/doc/po4a + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/doc/po4a + cp -pr README README.maintainers README.tests README.translators /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/doc/po4a + cp -pr COPYING /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/doc/po4a + cp -pr TODO /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64/usr/share/doc/po4a + exit 0 Provides: perl(Locale::Po4a::AsciiDoc) perl(Locale::Po4a::BibTeX) perl(Locale::Po4a::Chooser) perl(Locale::Po4a::Common) perl(Locale::Po4a::Dia) perl(Locale::Po4a::Docbook) perl(Locale::Po4a::Guide) perl(Locale::Po4a::Halibut) perl(Locale::Po4a::Ini) perl(Locale::Po4a::KernelHelp) perl(Locale::Po4a::LaTeX) perl(Locale::Po4a::Man) perl(Locale::Po4a::Po) perl(Locale::Po4a::Pod) perl(Locale::Po4a::RubyDoc) perl(Locale::Po4a::Sgml) perl(Locale::Po4a::TeX) perl(Locale::Po4a::Texinfo) perl(Locale::Po4a::Text) perl(Locale::Po4a::TransTractor) perl(Locale::Po4a::Wml) perl(Locale::Po4a::Xhtml) perl(Locale::Po4a::Xml) po4a = 0.52-1.mga7 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: perl >= 0:5.006 perl >= 1:5.010 perl(Carp) perl(Config) perl(Cwd) perl(DynaLoader) perl(Encode) perl(Encode::Guess) perl(Exporter) perl(Fcntl) perl(File::Basename) perl(File::Copy) perl(File::Path) perl(File::Spec) perl(File::Temp) perl(Getopt::Long) perl(Getopt::Std) perl(IO::File) perl(Locale::Po4a::Chooser) perl(Locale::Po4a::Common) perl(Locale::Po4a::Po) perl(Locale::Po4a::TeX) perl(Locale::Po4a::TransTractor) perl(Locale::Po4a::Xhtml) perl(Locale::Po4a::Xml) perl(POSIX) perl(Pod::Parser) perl(Pod::Usage) perl(Time::Local) perl(strict) perl(subs) perl(vars) perl(warnings) perl-base >= 2:5.26.2 Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64 Wrote: /home/pterjan/rpmbuild/RPMS/noarch/po4a-0.52-1.mga7.noarch.rpm Executing(%clean): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.aKW1Q2 + umask 022 + cd /home/pterjan/rpmbuild/BUILD + cd po4a-0.52 + /usr/bin/rm -rf /home/pterjan/rpmbuild/BUILDROOT/po4a-0.52-1.mga7.x86_64 + exit 0 Executing(--clean): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.VwmCDH + umask 022 + cd /home/pterjan/rpmbuild/BUILD + rm -rf po4a-0.52 + exit 0 D: [iurt_root_command] Success!