D: [iurt_root_command] chroot
Installing /home/pterjan/rpmbuild/SRPMS/perl-Test-PAUSE-Permissions-0.60.0-1.mga7.src.rpm
Executing(%prep): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.IqhTIb
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ cd /home/pterjan/rpmbuild/BUILD
+ rm -rf Test-PAUSE-Permissions-0.06
+ /usr/bin/gzip -dc /home/pterjan/rpmbuild/SOURCES/Test-PAUSE-Permissions-0.06.tar.gz
+ /usr/bin/tar -xof -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd Test-PAUSE-Permissions-0.06
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ exit 0
Executing(%build): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.G0TFm8
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd Test-PAUSE-Permissions-0.06
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Test::PAUSE::Permissions
Writing MYMETA.yml and MYMETA.json
+ /usr/bin/make -O -j4
cp lib/Test/PAUSE/Permissions.pm blib/lib/Test/PAUSE/Permissions.pm
Manifying 1 pod document
+ exit 0
Executing(%install): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.gfyHd6
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' /home/pterjan/rpmbuild/BUILDROOT/perl-Test-PAUSE-Permissions-0.60.0-1.mga7.x86_64 '!=' / ']'
+ rm -rf /home/pterjan/rpmbuild/BUILDROOT/perl-Test-PAUSE-Permissions-0.60.0-1.mga7.x86_64
++ dirname /home/pterjan/rpmbuild/BUILDROOT/perl-Test-PAUSE-Permissions-0.60.0-1.mga7.x86_64
+ mkdir -p /home/pterjan/rpmbuild/BUILDROOT
+ mkdir /home/pterjan/rpmbuild/BUILDROOT/perl-Test-PAUSE-Permissions-0.60.0-1.mga7.x86_64
+ cd Test-PAUSE-Permissions-0.06
+ '[' 1 -eq 1 ']'
+ /usr/bin/make install DESTDIR=/home/pterjan/rpmbuild/BUILDROOT/perl-Test-PAUSE-Permissions-0.60.0-1.mga7.x86_64 'INSTALL=/usr/bin/install -p'
Manifying 1 pod document
Installing /home/pterjan/rpmbuild/BUILDROOT/perl-Test-PAUSE-Permissions-0.60.0-1.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.2/Test/PAUSE/Permissions.pm
Installing /home/pterjan/rpmbuild/BUILDROOT/perl-Test-PAUSE-Permissions-0.60.0-1.mga7.x86_64/usr/share/man/man3/Test::PAUSE::Permissions.3pm
Appending installation info to /home/pterjan/rpmbuild/BUILDROOT/perl-Test-PAUSE-Permissions-0.60.0-1.mga7.x86_64/usr/lib/perl5/5.26.2/x86_64-linux-thread-multi/perllocal.pod
+ /usr/lib/rpm/find-debuginfo.sh -j4 -m -i --build-id-seed 0.60.0-1.mga7 --unique-debug-suffix -0.60.0-1.mga7.x86_64 --unique-debug-src-base perl-Test-PAUSE-Permissions-0.60.0-1.mga7.x86_64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 110000000 -S debugsourcefiles.list /home/pterjan/rpmbuild/BUILD/Test-PAUSE-Permissions-0.06

+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/compress_files .xz
+ '[' -n '' ']'
+ /usr/share/spec-helper/relink_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_perl
+ '[' -n '' ']'
+ /usr/share/spec-helper/lib_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/gprintify
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_mo
+ '[' -n '' ']'
+ /usr/share/spec-helper/translate_menu
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_pamd
+ '[' -n '' ']'
+ /usr/share/spec-helper/remove_info_dir
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_eol
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_elf_files
+ '[' 1 -eq 1 ']'
+ /usr/lib/rpm/brp-python-bytecompile /usr/bin/python 1
+ /usr/lib/rpm/brp-python-hardlink
Executing(%check): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.wno0u5
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd Test-PAUSE-Permissions-0.06
+ '[' 1 -eq 1 ']'
+ /usr/bin/make -O -j4 test
PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl5.26.2" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00_load.t .. ok
All tests successful.
Files=1, Tests=1,  0 wallclock secs ( 0.02 usr  0.01 sys +  0.21 cusr  0.03 csys =  0.27 CPU)
Result: PASS
+ exit 0
Processing files: perl-Test-PAUSE-Permissions-0.60.0-1.mga7.noarch
Executing(%doc): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.AEBpC5
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd Test-PAUSE-Permissions-0.06
+ DOCDIR=/home/pterjan/rpmbuild/BUILDROOT/perl-Test-PAUSE-Permissions-0.60.0-1.mga7.x86_64/usr/share/doc/perl-Test-PAUSE-Permissions
+ export LC_ALL=C
+ LC_ALL=C
+ export DOCDIR
+ /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILDROOT/perl-Test-PAUSE-Permissions-0.60.0-1.mga7.x86_64/usr/share/doc/perl-Test-PAUSE-Permissions
+ cp -pr README /home/pterjan/rpmbuild/BUILDROOT/perl-Test-PAUSE-Permissions-0.60.0-1.mga7.x86_64/usr/share/doc/perl-Test-PAUSE-Permissions
+ cp -pr META.json /home/pterjan/rpmbuild/BUILDROOT/perl-Test-PAUSE-Permissions-0.60.0-1.mga7.x86_64/usr/share/doc/perl-Test-PAUSE-Permissions
+ cp -pr Changes /home/pterjan/rpmbuild/BUILDROOT/perl-Test-PAUSE-Permissions-0.60.0-1.mga7.x86_64/usr/share/doc/perl-Test-PAUSE-Permissions
+ cp -pr META.yml /home/pterjan/rpmbuild/BUILDROOT/perl-Test-PAUSE-Permissions-0.60.0-1.mga7.x86_64/usr/share/doc/perl-Test-PAUSE-Permissions
+ exit 0
Provides: perl(Test::PAUSE::Permissions) = 0.60.0 perl-Test-PAUSE-Permissions = 0.60.0-1.mga7
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: perl(Config::Identity) perl(Exporter) perl(PAUSE::Permissions) >= 0.90.0 perl(Parse::CPAN::Meta) perl(Parse::LocalDistribution) >= 0.80.0 perl(Parse::PMFile) >= 0.150.0 perl(Test::More) perl(parent) perl(strict) perl(warnings) perl-base >= 2:5.26.2
Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/pterjan/rpmbuild/BUILDROOT/perl-Test-PAUSE-Permissions-0.60.0-1.mga7.x86_64
Wrote: /home/pterjan/rpmbuild/RPMS/noarch/perl-Test-PAUSE-Permissions-0.60.0-1.mga7.noarch.rpm
Executing(%clean): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.IMd6B6
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd Test-PAUSE-Permissions-0.06
+ /usr/bin/rm -rf /home/pterjan/rpmbuild/BUILDROOT/perl-Test-PAUSE-Permissions-0.60.0-1.mga7.x86_64
+ exit 0
Executing(--clean): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.ynoRF7
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ rm -rf Test-PAUSE-Permissions-0.06
+ exit 0
D: [iurt_root_command] Success!