D: [iurt_root_command] chroot
Installing /home/pterjan/rpmbuild/SRPMS/python-subprocess32-3.2.6-1.mga7.src.rpm
Executing(%prep): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.KUdRvR
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ cd /home/pterjan/rpmbuild/BUILD
+ rm -rf subprocess32-3.2.6
+ /usr/bin/gzip -dc /home/pterjan/rpmbuild/SOURCES/subprocess32-3.2.6.tar.gz
+ /usr/bin/tar -xof -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd subprocess32-3.2.6
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ exit 0
Executing(%build): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.7LnFjR
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd subprocess32-3.2.6
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ CFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4'
+ /usr/bin/python setup.py build
running build
running build_py
creating build
creating build/lib.linux-x86_64-2.7
copying subprocess32.py -> build/lib.linux-x86_64-2.7
running build_ext
building '_posixsubprocess' extension
creating build/temp.linux-x86_64-2.7
gcc -pthread -DNDEBUG -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -g -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fPIC -I/usr/include/python2.7 -c _posixsubprocess.c -o build/temp.linux-x86_64-2.7/_posixsubprocess.o
gcc -pthread -shared -Wl,--as-needed -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 build/temp.linux-x86_64-2.7/_posixsubprocess.o -L/usr/lib64 -lpython2.7 -o build/lib.linux-x86_64-2.7/_posixsubprocess.so
+ exit 0
Executing(%install): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.ifFE2R
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' /home/pterjan/rpmbuild/BUILDROOT/python-subprocess32-3.2.6-1.mga7.x86_64 '!=' / ']'
+ rm -rf /home/pterjan/rpmbuild/BUILDROOT/python-subprocess32-3.2.6-1.mga7.x86_64
++ dirname /home/pterjan/rpmbuild/BUILDROOT/python-subprocess32-3.2.6-1.mga7.x86_64
+ mkdir -p /home/pterjan/rpmbuild/BUILDROOT
+ mkdir /home/pterjan/rpmbuild/BUILDROOT/python-subprocess32-3.2.6-1.mga7.x86_64
+ cd subprocess32-3.2.6
+ '[' 1 -eq 1 ']'
+ /usr/bin/python setup.py install --skip-build --root /home/pterjan/rpmbuild/BUILDROOT/python-subprocess32-3.2.6-1.mga7.x86_64
running install
running install_lib
creating /home/pterjan/rpmbuild/BUILDROOT/python-subprocess32-3.2.6-1.mga7.x86_64/usr
creating /home/pterjan/rpmbuild/BUILDROOT/python-subprocess32-3.2.6-1.mga7.x86_64/usr/lib64
creating /home/pterjan/rpmbuild/BUILDROOT/python-subprocess32-3.2.6-1.mga7.x86_64/usr/lib64/python2.7
creating /home/pterjan/rpmbuild/BUILDROOT/python-subprocess32-3.2.6-1.mga7.x86_64/usr/lib64/python2.7/site-packages
copying build/lib.linux-x86_64-2.7/_posixsubprocess.so -> /home/pterjan/rpmbuild/BUILDROOT/python-subprocess32-3.2.6-1.mga7.x86_64/usr/lib64/python2.7/site-packages
copying build/lib.linux-x86_64-2.7/subprocess32.py -> /home/pterjan/rpmbuild/BUILDROOT/python-subprocess32-3.2.6-1.mga7.x86_64/usr/lib64/python2.7/site-packages
byte-compiling /home/pterjan/rpmbuild/BUILDROOT/python-subprocess32-3.2.6-1.mga7.x86_64/usr/lib64/python2.7/site-packages/subprocess32.py to subprocess32.pyc
running install_egg_info
Writing /home/pterjan/rpmbuild/BUILDROOT/python-subprocess32-3.2.6-1.mga7.x86_64/usr/lib64/python2.7/site-packages/subprocess32-3.2.6-py2.7.egg-info
+ /usr/lib/rpm/find-debuginfo.sh -j8 -m -i --build-id-seed 3.2.6-1.mga7 --unique-debug-suffix -3.2.6-1.mga7.x86_64 --unique-debug-src-base python-subprocess32-3.2.6-1.mga7.x86_64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 110000000 -S debugsourcefiles.list /home/pterjan/rpmbuild/BUILD/subprocess32-3.2.6

extracting debug info from /home/pterjan/rpmbuild/BUILDROOT/python-subprocess32-3.2.6-1.mga7.x86_64/usr/lib64/python2.7/site-packages/_posixsubprocess.so
/usr/lib/rpm/sepdebugcrcfix: Updated 1 CRC32s, 0 CRC32s did match.
68 blocks
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/compress_files .xz
+ '[' -n '' ']'
+ /usr/share/spec-helper/relink_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_perl
+ '[' -n '' ']'
+ /usr/share/spec-helper/lib_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/gprintify
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_mo
+ '[' -n '' ']'
+ /usr/share/spec-helper/translate_menu
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_pamd
+ '[' -n '' ']'
+ /usr/share/spec-helper/remove_info_dir
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_eol
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_elf_files
+ '[' 1 -eq 1 ']'
+ /usr/lib/rpm/brp-python-bytecompile /usr/bin/python 1
Bytecompiling .py files below /home/pterjan/rpmbuild/BUILDROOT/python-subprocess32-3.2.6-1.mga7.x86_64/usr/lib/debug/usr/lib64/python2.7 using /usr/bin/python2.7
Bytecompiling .py files below /home/pterjan/rpmbuild/BUILDROOT/python-subprocess32-3.2.6-1.mga7.x86_64/usr/lib64/python2.7 using /usr/bin/python2.7
+ /usr/lib/rpm/brp-python-hardlink
Executing(%check): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.Z6sSgV
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd subprocess32-3.2.6
+ '[' 1 -eq 1 ']'
++ pwd
+ PYTHONPATH=/home/pterjan/rpmbuild/BUILD/subprocess32-3.2.6
+ /usr/bin/python test_subprocess32.py
/home/pterjan/rpmbuild/BUILD/subprocess32-3.2.6/subprocess32.py:472: RuntimeWarning: The _posixsubprocess module is not being used. Child process reliability may suffer if your program uses threads.
  "program uses threads.", RuntimeWarning)
_posixsubprocess extension module not found.
test_call_kwargs (__main__.ProcessTestCase) ... ok
test_call_seq (__main__.ProcessTestCase) ... ok
test_call_timeout (__main__.ProcessTestCase) ... ok
test_check_call_nonzero (__main__.ProcessTestCase) ... ok
test_check_call_zero (__main__.ProcessTestCase) ... ok
test_check_output (__main__.ProcessTestCase) ... ok
test_check_output_nonzero (__main__.ProcessTestCase) ... ok
test_check_output_stderr (__main__.ProcessTestCase) ... ok
test_check_output_stdout_arg (__main__.ProcessTestCase) ... ok
test_check_output_timeout (__main__.ProcessTestCase) ... ok
test_communicate (__main__.ProcessTestCase) ... ok
test_communicate_eintr (__main__.ProcessTestCase) ... ok
test_communicate_pipe_buf (__main__.ProcessTestCase) ... ok
test_communicate_pipe_fd_leak (__main__.ProcessTestCase) ... ok
test_communicate_returns (__main__.ProcessTestCase) ... ok
test_communicate_stderr (__main__.ProcessTestCase) ... ok
test_communicate_stdin (__main__.ProcessTestCase) ... ok
test_communicate_stdout (__main__.ProcessTestCase) ... ok
test_communicate_timeout (__main__.ProcessTestCase) ... ok
test_communicate_timeout_large_ouput (__main__.ProcessTestCase) ... ok
test_cwd (__main__.ProcessTestCase) ... ok
test_cwd_with_absolute_arg (__main__.ProcessTestCase) ... ok
test_cwd_with_relative_arg (__main__.ProcessTestCase) ... ok
test_cwd_with_relative_executable (__main__.ProcessTestCase) ... ok
test_empty_env (__main__.ProcessTestCase) ... ok
test_env (__main__.ProcessTestCase) ... ok
test_executable_with_cwd (__main__.ProcessTestCase) ... ok
test_failed_child_execute_fd_leak (__main__.ProcessTestCase)
Test for the fork() failure fd leak reported in issue16327. ... ok
test_invalid_bufsize (__main__.ProcessTestCase) ... ok
test_issue8780 (__main__.ProcessTestCase) ... subprocess32.py:472: RuntimeWarning: The _posixsubprocess module is not being used. Child process reliability may suffer if your program uses threads.
  "program uses threads.", RuntimeWarning)
ok
test_leaking_fds_on_error (__main__.ProcessTestCase) ... ok
test_list2cmdline (__main__.ProcessTestCase) ... ok
test_no_leaking (__main__.ProcessTestCase) ... ok
test_poll (__main__.ProcessTestCase) ... ok
test_stderr_filedes (__main__.ProcessTestCase) ... ok
test_stderr_fileobj (__main__.ProcessTestCase) ... ok
test_stderr_none (__main__.ProcessTestCase) ... ok
test_stderr_pipe (__main__.ProcessTestCase) ... ok
test_stdin_filedes (__main__.ProcessTestCase) ... ok
test_stdin_fileobj (__main__.ProcessTestCase) ... ok
test_stdin_none (__main__.ProcessTestCase) ... ok
test_stdin_pipe (__main__.ProcessTestCase) ... ok
test_stdout_filedes (__main__.ProcessTestCase) ... ok
test_stdout_filedes_of_stdout (__main__.ProcessTestCase) ... ok
test_stdout_fileobj (__main__.ProcessTestCase) ... ok
test_stdout_none (__main__.ProcessTestCase) ... ok
test_stdout_pipe (__main__.ProcessTestCase) ... ok
test_stdout_stderr_file (__main__.ProcessTestCase) ... ok
test_stdout_stderr_pipe (__main__.ProcessTestCase) ... ok
test_threadsafe_wait (__main__.ProcessTestCase)
Issue21291: Popen.wait() needs to be threadsafe for returncode. ... ok
test_universal_newlines (__main__.ProcessTestCase) ... ok
test_universal_newlines_communicate (__main__.ProcessTestCase) ... ok
test_universal_newlines_communicate_input_none (__main__.ProcessTestCase) ... ok
test_universal_newlines_communicate_stdin_stdout_stderr (__main__.ProcessTestCase) ... ok
test_wait (__main__.ProcessTestCase) ... ok
test_wait_timeout (__main__.ProcessTestCase) ... ok
test_writes_before_communicate (__main__.ProcessTestCase) ... ok
test_args_string (__main__.POSIXProcessTestCase) ... ok
test_call_string (__main__.POSIXProcessTestCase) ... ok
test_close_fd_0 (__main__.POSIXProcessTestCase) ... ok
test_close_fd_1 (__main__.POSIXProcessTestCase) ... ok
test_close_fd_2 (__main__.POSIXProcessTestCase) ... ok
test_close_fds (__main__.POSIXProcessTestCase) ... ok
test_close_fds_0_1 (__main__.POSIXProcessTestCase) ... ok
test_close_fds_0_1_2 (__main__.POSIXProcessTestCase) ... ok
test_close_fds_0_2 (__main__.POSIXProcessTestCase) ... ok
test_close_fds_1_2 (__main__.POSIXProcessTestCase) ... ok
test_close_fds_after_preexec (__main__.POSIXProcessTestCase) ... ok
test_exception_bad_args_0 (__main__.POSIXProcessTestCase)
Test error in the child raised in the parent for a bad args[0]. ... ok
test_exception_bad_executable (__main__.POSIXProcessTestCase)
Test error in the child raised in the parent for a bad executable. ... ok
test_exception_cwd (__main__.POSIXProcessTestCase)
Test error in the child raised in the parent for a bad cwd. ... ok
test_fs_encode_unicode_error (__main__.POSIXProcessTestCase) ... ok
test_invalid_args (__main__.POSIXProcessTestCase) ... ok
test_kill (__main__.POSIXProcessTestCase) ... ok
test_leak_fast_process_del_killed (__main__.POSIXProcessTestCase) ... ok
test_pass_fds (__main__.POSIXProcessTestCase) ... ok
test_pipe_cloexec (__main__.POSIXProcessTestCase) ... ok
test_pipe_cloexec_real_tools (__main__.POSIXProcessTestCase) ... ok
test_preexec (__main__.POSIXProcessTestCase) ... ok
test_preexec_errpipe_does_not_double_close_pipes (__main__.POSIXProcessTestCase)
Issue16140: Don't double close pipes on preexec error. ... ok
test_preexec_exception (__main__.POSIXProcessTestCase) ... ok
test_preexec_gc_module_failure (__main__.POSIXProcessTestCase) ... ok
test_remapping_std_fds (__main__.POSIXProcessTestCase) ... ok
test_restore_signals (__main__.POSIXProcessTestCase) ... ok
test_run_abort (__main__.POSIXProcessTestCase) ... ok
test_select_unbuffered (__main__.POSIXProcessTestCase) ... ok
test_send_signal (__main__.POSIXProcessTestCase) ... ok
test_shell_sequence (__main__.POSIXProcessTestCase) ... ok
test_shell_string (__main__.POSIXProcessTestCase) ... ok
test_small_errpipe_write_fd (__main__.POSIXProcessTestCase)
Issue #15798: Popen should work when stdio fds are available. ... ok
test_specific_shell (__main__.POSIXProcessTestCase) ... ok
test_start_new_session (__main__.POSIXProcessTestCase) ... ok
test_stderr_stdin_are_single_inout_fd (__main__.POSIXProcessTestCase) ... ok
test_stdout_stderr_are_single_inout_fd (__main__.POSIXProcessTestCase) ... ok
test_stdout_stdin_are_single_inout_fd (__main__.POSIXProcessTestCase) ... ok
test_swap_fds (__main__.POSIXProcessTestCase) ... ok
test_terminate (__main__.POSIXProcessTestCase) ... ok
test_wait_when_sigchild_ignored (__main__.POSIXProcessTestCase) ... ok
test_zombie_fast_process_del (__main__.POSIXProcessTestCase) ... ok
test_call_kwargs (__main__.ProcessTestCaseNoPoll) ... ok
test_call_seq (__main__.ProcessTestCaseNoPoll) ... ok
test_call_timeout (__main__.ProcessTestCaseNoPoll) ... ok
test_check_call_nonzero (__main__.ProcessTestCaseNoPoll) ... ok
test_check_call_zero (__main__.ProcessTestCaseNoPoll) ... ok
test_check_output (__main__.ProcessTestCaseNoPoll) ... ok
test_check_output_nonzero (__main__.ProcessTestCaseNoPoll) ... ok
test_check_output_stderr (__main__.ProcessTestCaseNoPoll) ... ok
test_check_output_stdout_arg (__main__.ProcessTestCaseNoPoll) ... ok
test_check_output_timeout (__main__.ProcessTestCaseNoPoll) ... ok
test_communicate (__main__.ProcessTestCaseNoPoll) ... ok
test_communicate_eintr (__main__.ProcessTestCaseNoPoll) ... ok
test_communicate_pipe_buf (__main__.ProcessTestCaseNoPoll) ... ok
test_communicate_pipe_fd_leak (__main__.ProcessTestCaseNoPoll) ... ok
test_communicate_returns (__main__.ProcessTestCaseNoPoll) ... ok
test_communicate_stderr (__main__.ProcessTestCaseNoPoll) ... ok
test_communicate_stdin (__main__.ProcessTestCaseNoPoll) ... ok
test_communicate_stdout (__main__.ProcessTestCaseNoPoll) ... ok
test_communicate_timeout (__main__.ProcessTestCaseNoPoll) ... ok
test_communicate_timeout_large_ouput (__main__.ProcessTestCaseNoPoll) ... ok
test_cwd (__main__.ProcessTestCaseNoPoll) ... ok
test_cwd_with_absolute_arg (__main__.ProcessTestCaseNoPoll) ... ok
test_cwd_with_relative_arg (__main__.ProcessTestCaseNoPoll) ... ok
test_cwd_with_relative_executable (__main__.ProcessTestCaseNoPoll) ... ok
test_empty_env (__main__.ProcessTestCaseNoPoll) ... ok
test_env (__main__.ProcessTestCaseNoPoll) ... ok
test_executable_with_cwd (__main__.ProcessTestCaseNoPoll) ... ok
test_failed_child_execute_fd_leak (__main__.ProcessTestCaseNoPoll)
Test for the fork() failure fd leak reported in issue16327. ... ok
test_invalid_bufsize (__main__.ProcessTestCaseNoPoll) ... ok
test_issue8780 (__main__.ProcessTestCaseNoPoll) ... subprocess32.py:472: RuntimeWarning: The _posixsubprocess module is not being used. Child process reliability may suffer if your program uses threads.
  "program uses threads.", RuntimeWarning)
ok
test_leaking_fds_on_error (__main__.ProcessTestCaseNoPoll) ... ok
test_list2cmdline (__main__.ProcessTestCaseNoPoll) ... ok
test_no_leaking (__main__.ProcessTestCaseNoPoll) ... ok
test_poll (__main__.ProcessTestCaseNoPoll) ... ok
test_stderr_filedes (__main__.ProcessTestCaseNoPoll) ... ok
test_stderr_fileobj (__main__.ProcessTestCaseNoPoll) ... ok
test_stderr_none (__main__.ProcessTestCaseNoPoll) ... ok
test_stderr_pipe (__main__.ProcessTestCaseNoPoll) ... ok
test_stdin_filedes (__main__.ProcessTestCaseNoPoll) ... ok
test_stdin_fileobj (__main__.ProcessTestCaseNoPoll) ... ok
test_stdin_none (__main__.ProcessTestCaseNoPoll) ... ok
test_stdin_pipe (__main__.ProcessTestCaseNoPoll) ... ok
test_stdout_filedes (__main__.ProcessTestCaseNoPoll) ... ok
test_stdout_filedes_of_stdout (__main__.ProcessTestCaseNoPoll) ... ok
test_stdout_fileobj (__main__.ProcessTestCaseNoPoll) ... ok
test_stdout_none (__main__.ProcessTestCaseNoPoll) ... ok
test_stdout_pipe (__main__.ProcessTestCaseNoPoll) ... ok
test_stdout_stderr_file (__main__.ProcessTestCaseNoPoll) ... ok
test_stdout_stderr_pipe (__main__.ProcessTestCaseNoPoll) ... ok
test_threadsafe_wait (__main__.ProcessTestCaseNoPoll)
Issue21291: Popen.wait() needs to be threadsafe for returncode. ... ok
test_universal_newlines (__main__.ProcessTestCaseNoPoll) ... ok
test_universal_newlines_communicate (__main__.ProcessTestCaseNoPoll) ... ok
test_universal_newlines_communicate_input_none (__main__.ProcessTestCaseNoPoll) ... ok
test_universal_newlines_communicate_stdin_stdout_stderr (__main__.ProcessTestCaseNoPoll) ... ok
test_wait (__main__.ProcessTestCaseNoPoll) ... ok
test_wait_timeout (__main__.ProcessTestCaseNoPoll) ... ok
test_writes_before_communicate (__main__.ProcessTestCaseNoPoll) ... ok
test_eintr_retry_call (__main__.HelperFunctionTests) ... ok
test_get_exec_path (__main__.HelperFunctionTests) ... ok
test_communicate_stdin (__main__.ContextManagerTests) ... ok
test_invalid_args (__main__.ContextManagerTests) ... ok
test_pipe (__main__.ContextManagerTests) ... ok
test_returncode (__main__.ContextManagerTests) ... ok

----------------------------------------------------------------------
Ran 162 tests in 77.187s

OK
+ exit 0
Processing files: python2-subprocess32-3.2.6-1.mga7.x86_64
Executing(%doc): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.YLtdjH
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd subprocess32-3.2.6
+ DOCDIR=/home/pterjan/rpmbuild/BUILDROOT/python-subprocess32-3.2.6-1.mga7.x86_64/usr/share/doc/python2-subprocess32
+ export LC_ALL=C
+ LC_ALL=C
+ export DOCDIR
+ /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILDROOT/python-subprocess32-3.2.6-1.mga7.x86_64/usr/share/doc/python2-subprocess32
+ cp -pr LICENSE /home/pterjan/rpmbuild/BUILDROOT/python-subprocess32-3.2.6-1.mga7.x86_64/usr/share/doc/python2-subprocess32
+ cp -pr README.txt /home/pterjan/rpmbuild/BUILDROOT/python-subprocess32-3.2.6-1.mga7.x86_64/usr/share/doc/python2-subprocess32
+ exit 0
warning: Deprecated external dependency generator is used!
Finding  Provides: /bin/sh -c " /usr/bin/grep -v  '/usr/lib64/python2.7/site-packages/.*\.so$' | while read FILE; do echo "${FILE}" | /usr/lib/rpm/rpmdeps -P; done | /bin/sort -u "
Finding  Requires(interp): 
Finding  Requires(rpmlib): 
Finding  Requires(verify): 
Finding  Requires(pre): 
Finding  Requires(post): 
Finding  Requires(preun): 
Finding  Requires(postun): 
Finding  Requires(pretrans): 
Finding  Requires(posttrans): 
Finding  Requires: /bin/sh -c "  while read FILE; do echo "${FILE}" | /usr/lib/rpm/rpmdeps -R; done | /bin/sort -u "
Finding  Conflicts: 
Finding  Obsoletes: 
Finding  Recommends: 
Finding  Suggests: 
Finding  Supplements: 
Finding  Enhances: 
Provides: python-subprocess32 = 3.2.6-1.mga7 python-subprocess32(x86-64) = 3.2.6-1.mga7 python2-subprocess32 = 3.2.6-1.mga7 python2-subprocess32(x86-64) = 3.2.6-1.mga7 python2.7dist(subprocess32) = 3.2.6 python2dist(subprocess32) = 3.2.6 pythonegg(2)(subprocess32) = 3.2.6
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: libc.so.6()(64bit) libc.so.6(GLIBC_2.2.5)(64bit) libc.so.6(GLIBC_2.4)(64bit) libc.so.6(GLIBC_2.9)(64bit) libpthread.so.0()(64bit) libpthread.so.0(GLIBC_2.2.5)(64bit) libpython2.7.so.1.0()(64bit) python(abi) = 2.7
Obsoletes: python-subprocess32 < 3.2.6-1.mga7
Processing files: python-subprocess32-debugsource-3.2.6-1.mga7.x86_64
warning: Deprecated external dependency generator is used!
Provides: python-subprocess32-debugsource = 3.2.6-1.mga7 python-subprocess32-debugsource(x86-64) = 3.2.6-1.mga7
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Processing files: python2-subprocess32-debuginfo-3.2.6-1.mga7.x86_64
warning: Deprecated external dependency generator is used!
Finding  Provides: /bin/sh -c " /usr/bin/grep -v  '/usr/lib64/python2.7/site-packages/.*\.so$' | while read FILE; do echo "${FILE}" | /usr/lib/rpm/rpmdeps -P; done | /bin/sort -u "
Provides: debuginfo(build-id) = e2634cda1ce838dd7aa3afdc8981169892b30d12 python2-subprocess32-debuginfo = 3.2.6-1.mga7 python2-subprocess32-debuginfo(x86-64) = 3.2.6-1.mga7
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Recommends: python-subprocess32-debugsource(x86-64) = 3.2.6-1.mga7
Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/pterjan/rpmbuild/BUILDROOT/python-subprocess32-3.2.6-1.mga7.x86_64
Wrote: /home/pterjan/rpmbuild/RPMS/x86_64/python2-subprocess32-3.2.6-1.mga7.x86_64.rpm
Wrote: /home/pterjan/rpmbuild/RPMS/x86_64/python-subprocess32-debugsource-3.2.6-1.mga7.x86_64.rpm
Wrote: /home/pterjan/rpmbuild/RPMS/x86_64/python2-subprocess32-debuginfo-3.2.6-1.mga7.x86_64.rpm
Executing(%clean): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.ZOArfJ
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd subprocess32-3.2.6
+ /usr/bin/rm -rf /home/pterjan/rpmbuild/BUILDROOT/python-subprocess32-3.2.6-1.mga7.x86_64
+ exit 0
Executing(--clean): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.uGwceL
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ rm -rf subprocess32-3.2.6
+ exit 0
D: [iurt_root_command] Success!