D: [iurt_root_command] chroot
Installing /home/pterjan/rpmbuild/SRPMS/perl-Crypt-Curve25519-0.60.0-3.mga7.src.rpm
Executing(%prep): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.WssVEK
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ cd /home/pterjan/rpmbuild/BUILD
+ rm -rf Crypt-Curve25519-0.06
+ /usr/bin/gzip -dc /home/pterjan/rpmbuild/SOURCES/Crypt-Curve25519-0.06.tar.gz
+ /usr/bin/tar -xof -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd Crypt-Curve25519-0.06
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ exit 0
Executing(%build): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.88G9ZS
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd Crypt-Curve25519-0.06
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Crypt::Curve25519
Writing MYMETA.yml and MYMETA.json
+ echo 'warning: %make is deprecated, try %make_build instead'
warning: %make is deprecated, try %make_build instead
+ /usr/bin/make -O -j8
cp lib/Crypt/Curve25519.pm blib/lib/Crypt/Curve25519.pm
Running Mkbootstrap for Curve25519 ()
chmod 644 "Curve25519.bs"
"/usr/bin/perl5.26.1" -MExtUtils::Command::MM -e 'cp_nonempty' -- Curve25519.bs blib/arch/auto/Crypt/Curve25519/Curve25519.bs 644
"/usr/bin/perl5.26.1" "/usr/lib/perl5/5.26.1/ExtUtils/xsubpp"  -typemap '/usr/lib/perl5/5.26.1/ExtUtils/typemap' -typemap '/home/pterjan/rpmbuild/BUILD/Crypt-Curve25519-0.06/typemap'  Curve25519.xs > Curve25519.xsc
mv Curve25519.xsc Curve25519.c
gcc -c   -D_REENTRANT -D_GNU_SOURCE -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fwrapv -fno-strict-aliasing -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g   -DVERSION=\"0.06\" -DXS_VERSION=\"0.06\" -fPIC "-I/usr/lib/perl5/5.26.1/x86_64-linux-thread-multi/CORE"  -DUSE_X64=1 Curve25519.c
rm -f blib/arch/auto/Crypt/Curve25519/Curve25519.so
gcc  -shared  -L/usr/local/lib64 -fstack-protector-strong Curve25519.o  -o blib/arch/auto/Crypt/Curve25519/Curve25519.so  \
    -lperl   \
  
chmod 755 blib/arch/auto/Crypt/Curve25519/Curve25519.so
Manifying 1 pod document
+ exit 0
Executing(%install): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.iHFJg6
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' /home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Curve25519-0.60.0-3.mga7.x86_64 '!=' / ']'
+ rm -rf /home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Curve25519-0.60.0-3.mga7.x86_64
++ dirname /home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Curve25519-0.60.0-3.mga7.x86_64
+ mkdir -p /home/pterjan/rpmbuild/BUILDROOT
+ mkdir /home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Curve25519-0.60.0-3.mga7.x86_64
+ cd Crypt-Curve25519-0.06
+ '[' 1 -eq 1 ']'
+ /usr/bin/make install DESTDIR=/home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Curve25519-0.60.0-3.mga7.x86_64 'INSTALL=/usr/bin/install -p'
"/usr/bin/perl5.26.1" -MExtUtils::Command::MM -e 'cp_nonempty' -- Curve25519.bs blib/arch/auto/Crypt/Curve25519/Curve25519.bs 644
Manifying 1 pod document
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Curve25519-0.60.0-3.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.1/x86_64-linux-thread-multi/auto/Crypt/Curve25519/Curve25519.so
Installing /home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Curve25519-0.60.0-3.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.1/x86_64-linux-thread-multi/Crypt/Curve25519.pm
Installing /home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Curve25519-0.60.0-3.mga7.x86_64/usr/share/man/man3/Crypt::Curve25519.3pm
Appending installation info to /home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Curve25519-0.60.0-3.mga7.x86_64/usr/lib/perl5/5.26.1/x86_64-linux-thread-multi/perllocal.pod
+ /usr/lib/rpm/find-debuginfo.sh -j8 -m -i --build-id-seed 0.60.0-3.mga7 --unique-debug-suffix -0.60.0-3.mga7.x86_64 --unique-debug-src-base perl-Crypt-Curve25519-0.60.0-3.mga7.x86_64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 110000000 -S debugsourcefiles.list /home/pterjan/rpmbuild/BUILD/Crypt-Curve25519-0.06

extracting debug info from /home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Curve25519-0.60.0-3.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.1/x86_64-linux-thread-multi/auto/Crypt/Curve25519/Curve25519.so
objcopy: unable to copy file '/home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Curve25519-0.60.0-3.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.1/x86_64-linux-thread-multi/auto/Crypt/Curve25519/Curve25519.so'; reason: Permission denied
/usr/lib/rpm/sepdebugcrcfix: Updated 1 CRC32s, 0 CRC32s did match.
44 blocks
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/compress_files .xz
+ '[' -n '' ']'
+ /usr/share/spec-helper/relink_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_perl
+ '[' -n '' ']'
+ /usr/share/spec-helper/lib_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/gprintify
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_mo
+ '[' -n '' ']'
+ /usr/share/spec-helper/translate_menu
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_pamd
+ '[' -n '' ']'
+ /usr/share/spec-helper/remove_info_dir
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_eol
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_elf_files
+ '[' 1 -eq 1 ']'
+ /usr/lib/rpm/brp-python-bytecompile /usr/bin/python 1
+ /usr/lib/rpm/brp-python-hardlink
Executing(%check): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.gPYsjm
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd Crypt-Curve25519-0.06
+ '[' 1 -eq 1 ']'
+ echo 'warning: %make is deprecated, try %make_build instead'
warning: %make is deprecated, try %make_build instead
+ /usr/bin/make -O -j8 test
"/usr/bin/perl5.26.1" -MExtUtils::Command::MM -e 'cp_nonempty' -- Curve25519.bs blib/arch/auto/Crypt/Curve25519/Curve25519.bs 644
PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl5.26.1" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-compile.t ........ ok
t/01-exceptions.t ..... ok
t/02-synopsis-proc.t .. ok
t/03-synopsis-oo.t .... ok
t/04-proc-vs-oo.t ..... ok
t/05-primitive.t ...... ok
t/Crypt-Curve25519.t .. ok
All tests successful.
Files=7, Tests=10028,  5 wallclock secs ( 1.09 usr  0.12 sys +  5.11 cusr  0.15 csys =  6.47 CPU)
Result: PASS
+ exit 0
Processing files: perl-Crypt-Curve25519-0.60.0-3.mga7.x86_64
Executing(%doc): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.cTcWuP
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd Crypt-Curve25519-0.06
+ DOCDIR=/home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Curve25519-0.60.0-3.mga7.x86_64/usr/share/doc/perl-Crypt-Curve25519
+ export LC_ALL=C
+ LC_ALL=C
+ export DOCDIR
+ /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Curve25519-0.60.0-3.mga7.x86_64/usr/share/doc/perl-Crypt-Curve25519
+ cp -pr META.json /home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Curve25519-0.60.0-3.mga7.x86_64/usr/share/doc/perl-Crypt-Curve25519
+ cp -pr INSTALL /home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Curve25519-0.60.0-3.mga7.x86_64/usr/share/doc/perl-Crypt-Curve25519
+ cp -pr Changes /home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Curve25519-0.60.0-3.mga7.x86_64/usr/share/doc/perl-Crypt-Curve25519
+ cp -pr README /home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Curve25519-0.60.0-3.mga7.x86_64/usr/share/doc/perl-Crypt-Curve25519
+ cp -pr META.yml /home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Curve25519-0.60.0-3.mga7.x86_64/usr/share/doc/perl-Crypt-Curve25519
+ exit 0
Executing(%license): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.A1MEIi
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd Crypt-Curve25519-0.06
+ LICENSEDIR=/home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Curve25519-0.60.0-3.mga7.x86_64/usr/share/licenses/perl-Crypt-Curve25519
+ export LC_ALL=C
+ LC_ALL=C
+ export LICENSEDIR
+ /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Curve25519-0.60.0-3.mga7.x86_64/usr/share/licenses/perl-Crypt-Curve25519
+ cp -pr LICENSE /home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Curve25519-0.60.0-3.mga7.x86_64/usr/share/licenses/perl-Crypt-Curve25519
+ exit 0
Provides: perl(Crypt::Curve25519) = 0.60.0 perl-Crypt-Curve25519 = 0.60.0-3.mga7 perl-Crypt-Curve25519(x86-64) = 0.60.0-3.mga7
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: libc.so.6()(64bit) libc.so.6(GLIBC_2.2.5)(64bit) libc.so.6(GLIBC_2.4)(64bit) libperl.so.5.26()(64bit) perl(Carp) perl(Exporter) perl(XSLoader) perl(strict) perl(warnings) perl-base >= 2:5.26.1
Processing files: perl-Crypt-Curve25519-debugsource-0.60.0-3.mga7.x86_64
Provides: perl-Crypt-Curve25519-debugsource = 0.60.0-3.mga7 perl-Crypt-Curve25519-debugsource(x86-64) = 0.60.0-3.mga7
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Processing files: perl-Crypt-Curve25519-debuginfo-0.60.0-3.mga7.x86_64
Provides: debuginfo(build-id) = 6a1f993148a4a193d37522981bbabbe11cd8bfb0 perl-Crypt-Curve25519-debuginfo = 0.60.0-3.mga7 perl-Crypt-Curve25519-debuginfo(x86-64) = 0.60.0-3.mga7
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Recommends: perl-Crypt-Curve25519-debugsource(x86-64) = 0.60.0-3.mga7
Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Curve25519-0.60.0-3.mga7.x86_64
Wrote: /home/pterjan/rpmbuild/RPMS/x86_64/perl-Crypt-Curve25519-0.60.0-3.mga7.x86_64.rpm
Wrote: /home/pterjan/rpmbuild/RPMS/x86_64/perl-Crypt-Curve25519-debugsource-0.60.0-3.mga7.x86_64.rpm
Wrote: /home/pterjan/rpmbuild/RPMS/x86_64/perl-Crypt-Curve25519-debuginfo-0.60.0-3.mga7.x86_64.rpm
Executing(%clean): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.8SXYON
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd Crypt-Curve25519-0.06
+ /usr/bin/rm -rf /home/pterjan/rpmbuild/BUILDROOT/perl-Crypt-Curve25519-0.60.0-3.mga7.x86_64
+ exit 0
Executing(--clean): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.am1CZi
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ rm -rf Crypt-Curve25519-0.06
+ exit 0
D: [iurt_root_command] Success!