D: [iurt_root_command] chroot
Installing /home/pterjan/rpmbuild/SRPMS/perl-CGI-FastTemplate-1.90.0-7.mga7.src.rpm
Executing(%prep): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.Mqa8AJ
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ cd /home/pterjan/rpmbuild/BUILD
+ rm -rf CGI-FastTemplate-1.09
+ /usr/bin/bzip2 -dc /home/pterjan/rpmbuild/SOURCES/CGI-FastTemplate-1.09.tar.bz2
+ /usr/bin/tar -xof -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd CGI-FastTemplate-1.09
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ exit 0
Executing(%build): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.IsJpli
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd CGI-FastTemplate-1.09
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for CGI::FastTemplate
Writing MYMETA.yml and MYMETA.json
+ echo 'warning: %make is deprecated, try %make_build instead'
warning: %make is deprecated, try %make_build instead
+ /usr/bin/make -O -j8
cp FastTemplate.pm blib/lib/CGI/FastTemplate.pm
Manifying 1 pod document
+ exit 0
Executing(%install): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.wmCzdS
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' /home/pterjan/rpmbuild/BUILDROOT/perl-CGI-FastTemplate-1.90.0-7.mga7.x86_64 '!=' / ']'
+ rm -rf /home/pterjan/rpmbuild/BUILDROOT/perl-CGI-FastTemplate-1.90.0-7.mga7.x86_64
++ dirname /home/pterjan/rpmbuild/BUILDROOT/perl-CGI-FastTemplate-1.90.0-7.mga7.x86_64
+ mkdir -p /home/pterjan/rpmbuild/BUILDROOT
+ mkdir /home/pterjan/rpmbuild/BUILDROOT/perl-CGI-FastTemplate-1.90.0-7.mga7.x86_64
+ cd CGI-FastTemplate-1.09
+ '[' 1 -eq 1 ']'
+ echo 'warning: %makeinstall_std is deprecated, try %make_install instead'
warning: %makeinstall_std is deprecated, try %make_install instead
+ make DESTDIR=/home/pterjan/rpmbuild/BUILDROOT/perl-CGI-FastTemplate-1.90.0-7.mga7.x86_64 install
Manifying 1 pod document
Installing /home/pterjan/rpmbuild/BUILDROOT/perl-CGI-FastTemplate-1.90.0-7.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.1/CGI/FastTemplate.pm
Installing /home/pterjan/rpmbuild/BUILDROOT/perl-CGI-FastTemplate-1.90.0-7.mga7.x86_64/usr/share/man/man3/CGI::FastTemplate.3pm
Appending installation info to /home/pterjan/rpmbuild/BUILDROOT/perl-CGI-FastTemplate-1.90.0-7.mga7.x86_64/usr/lib/perl5/5.26.1/x86_64-linux-thread-multi/perllocal.pod
+ /usr/lib/rpm/find-debuginfo.sh -j8 -m -i --build-id-seed 1.90.0-7.mga7 --unique-debug-suffix -1.90.0-7.mga7.x86_64 --unique-debug-src-base perl-CGI-FastTemplate-1.90.0-7.mga7.x86_64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 110000000 -S debugsourcefiles.list /home/pterjan/rpmbuild/BUILD/CGI-FastTemplate-1.09

+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/compress_files .xz
+ '[' -n '' ']'
+ /usr/share/spec-helper/relink_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_perl
+ '[' -n '' ']'
+ /usr/share/spec-helper/lib_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/gprintify
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_mo
+ '[' -n '' ']'
+ /usr/share/spec-helper/translate_menu
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_pamd
+ '[' -n '' ']'
+ /usr/share/spec-helper/remove_info_dir
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_eol
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_elf_files
+ '[' 1 -eq 1 ']'
+ /usr/lib/rpm/brp-python-bytecompile /usr/bin/python 1
+ /usr/lib/rpm/brp-python-hardlink
Executing(%check): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.4ySXXt
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd CGI-FastTemplate-1.09
+ '[' 1 -eq 1 ']'
+ /usr/bin/make test
PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl5.26.1" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/instantiate.t ... ok
t/parse_append.t .. ok
t/parse_simple.t .. ok
t/parse_slurp.t ... ok

  Note: Warning about 'no value found' is expected
  [CGI::FastTemplate] Warning: no value found for variable: NOEXIST
                    t/parse_strict.t .. ok
All tests successful.
Files=5, Tests=10,  0 wallclock secs ( 0.02 usr +  0.02 sys =  0.04 CPU)
Result: PASS
+ exit 0
Processing files: perl-CGI-FastTemplate-1.90.0-7.mga7.noarch
Executing(%doc): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.UvnZ85
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd CGI-FastTemplate-1.09
+ DOCDIR=/home/pterjan/rpmbuild/BUILDROOT/perl-CGI-FastTemplate-1.90.0-7.mga7.x86_64/usr/share/doc/perl-CGI-FastTemplate
+ export LC_ALL=C
+ LC_ALL=C
+ export DOCDIR
+ /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILDROOT/perl-CGI-FastTemplate-1.90.0-7.mga7.x86_64/usr/share/doc/perl-CGI-FastTemplate
+ cp -pr README /home/pterjan/rpmbuild/BUILDROOT/perl-CGI-FastTemplate-1.90.0-7.mga7.x86_64/usr/share/doc/perl-CGI-FastTemplate
+ cp -pr templates /home/pterjan/rpmbuild/BUILDROOT/perl-CGI-FastTemplate-1.90.0-7.mga7.x86_64/usr/share/doc/perl-CGI-FastTemplate
+ exit 0
Provides: perl(CGI::FastTemplate) = 1.90.0 perl-CGI-FastTemplate = 1.90.0-7.mga7
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: perl(strict) perl-base >= 2:5.26.1
Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/pterjan/rpmbuild/BUILDROOT/perl-CGI-FastTemplate-1.90.0-7.mga7.x86_64
Wrote: /home/pterjan/rpmbuild/RPMS/noarch/perl-CGI-FastTemplate-1.90.0-7.mga7.noarch.rpm
Executing(%clean): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.AorjLI
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd CGI-FastTemplate-1.09
+ /usr/bin/rm -rf /home/pterjan/rpmbuild/BUILDROOT/perl-CGI-FastTemplate-1.90.0-7.mga7.x86_64
+ exit 0
Executing(--clean): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.GIbPpl
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ rm -rf CGI-FastTemplate-1.09
+ exit 0
D: [iurt_root_command] Success!