D: [iurt_root_command] chroot Installing /home/pterjan/rpmbuild/SRPMS/perl-Tapper-Remote-5.0.0-1.mga7.src.rpm Executing(%prep): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.PWlE3j + umask 022 + cd /home/pterjan/rpmbuild/BUILD + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + cd /home/pterjan/rpmbuild/BUILD + rm -rf Tapper-Remote-5.0.0 + /usr/bin/gzip -dc /home/pterjan/rpmbuild/SOURCES/Tapper-Remote-5.0.0.tar.gz + /usr/bin/tar -xof - + STATUS=0 + '[' 0 -ne 0 ']' + cd Tapper-Remote-5.0.0 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + exit 0 Executing(%build): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.rBa6qa + umask 022 + cd /home/pterjan/rpmbuild/BUILD + cd Tapper-Remote-5.0.0 + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + /usr/bin/perl Makefile.PL INSTALLDIRS=vendor Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Tapper::Remote Writing MYMETA.yml and MYMETA.json + echo 'warning: %make is deprecated, try %make_build instead' warning: %make is deprecated, try %make_build instead + /usr/bin/make -O -j8 cp lib/Tapper/Remote.pm blib/lib/Tapper/Remote.pm cp lib/Tapper/Remote/Net.pm blib/lib/Tapper/Remote/Net.pm cp lib/Tapper/Remote/Config.pm blib/lib/Tapper/Remote/Config.pm Manifying 3 pod documents + exit 0 Executing(%install): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.PYD3z1 + umask 022 + cd /home/pterjan/rpmbuild/BUILD + '[' 1 -eq 1 ']' + '[' /home/pterjan/rpmbuild/BUILDROOT/perl-Tapper-Remote-5.0.0-1.mga7.x86_64 '!=' / ']' + rm -rf /home/pterjan/rpmbuild/BUILDROOT/perl-Tapper-Remote-5.0.0-1.mga7.x86_64 ++ dirname /home/pterjan/rpmbuild/BUILDROOT/perl-Tapper-Remote-5.0.0-1.mga7.x86_64 + mkdir -p /home/pterjan/rpmbuild/BUILDROOT + mkdir /home/pterjan/rpmbuild/BUILDROOT/perl-Tapper-Remote-5.0.0-1.mga7.x86_64 + cd Tapper-Remote-5.0.0 + '[' 1 -eq 1 ']' + /usr/bin/make install DESTDIR=/home/pterjan/rpmbuild/BUILDROOT/perl-Tapper-Remote-5.0.0-1.mga7.x86_64 'INSTALL=/usr/bin/install -p' Manifying 3 pod documents Installing /home/pterjan/rpmbuild/BUILDROOT/perl-Tapper-Remote-5.0.0-1.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.0/Tapper/Remote.pm Installing /home/pterjan/rpmbuild/BUILDROOT/perl-Tapper-Remote-5.0.0-1.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.0/Tapper/Remote/Config.pm Installing /home/pterjan/rpmbuild/BUILDROOT/perl-Tapper-Remote-5.0.0-1.mga7.x86_64/usr/lib/perl5/vendor_perl/5.26.0/Tapper/Remote/Net.pm Installing /home/pterjan/rpmbuild/BUILDROOT/perl-Tapper-Remote-5.0.0-1.mga7.x86_64/usr/share/man/man3/Tapper::Remote::Net.3pm Installing /home/pterjan/rpmbuild/BUILDROOT/perl-Tapper-Remote-5.0.0-1.mga7.x86_64/usr/share/man/man3/Tapper::Remote::Config.3pm Installing /home/pterjan/rpmbuild/BUILDROOT/perl-Tapper-Remote-5.0.0-1.mga7.x86_64/usr/share/man/man3/Tapper::Remote.3pm Appending installation info to /home/pterjan/rpmbuild/BUILDROOT/perl-Tapper-Remote-5.0.0-1.mga7.x86_64/usr/lib/perl5/5.26.0/x86_64-linux-thread-multi/perllocal.pod + /usr/lib/rpm/find-debuginfo.sh -j8 -m -i --build-id-seed 5.0.0-1.mga7 --unique-debug-suffix -5.0.0-1.mga7.x86_64 --unique-debug-src-base perl-Tapper-Remote-5.0.0-1.mga7.x86_64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 110000000 -S debugsourcefiles.list /home/pterjan/rpmbuild/BUILD/Tapper-Remote-5.0.0 + '[' -n '' ']' + /usr/share/spec-helper/clean_files + '[' -n '' ']' + /usr/share/spec-helper/compress_files .xz + '[' -n '' ']' + /usr/share/spec-helper/relink_symlinks + '[' -n '' ']' + /usr/share/spec-helper/clean_perl + '[' -n '' ']' + /usr/share/spec-helper/lib_symlinks + '[' -n '' ']' + /usr/share/spec-helper/gprintify + '[' -n '' ']' + /usr/share/spec-helper/fix_mo + '[' -n '' ']' + /usr/share/spec-helper/translate_menu + '[' -n '' ']' + /usr/share/spec-helper/fix_pamd + '[' -n '' ']' + /usr/share/spec-helper/remove_info_dir + '[' -n '' ']' + /usr/share/spec-helper/fix_eol + '[' -n '' ']' + /usr/share/spec-helper/check_elf_files + '[' 1 -eq 1 ']' + /usr/lib/rpm/brp-python-bytecompile /usr/bin/python 1 + /usr/lib/rpm/brp-python-hardlink Executing(%check): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.hNyVJT + umask 022 + cd /home/pterjan/rpmbuild/BUILD + cd Tapper-Remote-5.0.0 + '[' 1 -eq 1 ']' + echo 'warning: %make is deprecated, try %make_build instead' warning: %make is deprecated, try %make_build instead + /usr/bin/make -O -j8 test PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl5.26.0" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t # Failed test 'use Tapper::Remote::Config;' # at t/00-load.t line 7. # Tried to use 'Tapper::Remote::Config'. # Error: Can't load '/usr/lib/perl5/vendor_perl/5.26.0/x86_64-linux-thread-multi/auto/YAML/Syck/Syck.so' for module YAML::Syck: /usr/lib/perl5/vendor_perl/5.26.0/x86_64-linux-thread-multi/auto/YAML/Syck/Syck.so: undefined symbol: Perl_pad_sv at /usr/lib/perl5/5.26.0/x86_64-linux-thread-multi/DynaLoader.pm line 193. # at /usr/lib/perl5/vendor_perl/5.26.0/x86_64-linux-thread-multi/YAML/Syck.pm line 36. # BEGIN failed--compilation aborted at /usr/lib/perl5/vendor_perl/5.26.0/x86_64-linux-thread-multi/YAML/Syck.pm line 36. # Compilation failed in require at /home/pterjan/rpmbuild/BUILD/Tapper-Remote-5.0.0/blib/lib/Tapper/Remote/Config.pm line 12. # BEGIN failed--compilation aborted at /home/pterjan/rpmbuild/BUILD/Tapper-Remote-5.0.0/blib/lib/Tapper/Remote/Config.pm line 12. # Compilation failed in require at t/00-load.t line 7. # BEGIN failed--compilation aborted at t/00-load.t line 7. # Failed test 'use Tapper::Remote::Net;' # at t/00-load.t line 8. # Tried to use 'Tapper::Remote::Net'. # Error: Attempt to reload YAML/Syck.pm aborted. # Compilation failed in require at /home/pterjan/rpmbuild/BUILD/Tapper-Remote-5.0.0/blib/lib/Tapper/Remote/Net.pm line 12. # BEGIN failed--compilation aborted at /home/pterjan/rpmbuild/BUILD/Tapper-Remote-5.0.0/blib/lib/Tapper/Remote/Net.pm line 12. # Compilation failed in require at t/00-load.t line 8. # BEGIN failed--compilation aborted at t/00-load.t line 8. # Looks like you failed 2 tests of 3. t/00-load.t ................... Dubious, test returned 2 (wstat 512, 0x200) Failed 2/3 subtests t/author-eol.t ................ skipped: these tests are for testing by the author t/author-no-tabs.t ............ skipped: these tests are for testing by the author t/author-pod-syntax.t ......... skipped: these tests are for testing by the author t/release-pod-coverage.t ...... skipped: these tests are for release candidate testing # Failed test 'use Tapper::Remote::Config;' # at t/tapper-remote-config-prc.t line 8. # Tried to use 'Tapper::Remote::Config'. # Error: Can't load '/usr/lib/perl5/vendor_perl/5.26.0/x86_64-linux-thread-multi/auto/YAML/Syck/Syck.so' for module YAML::Syck: /usr/lib/perl5/vendor_perl/5.26.0/x86_64-linux-thread-multi/auto/YAML/Syck/Syck.so: undefined symbol: Perl_pad_sv at /usr/lib/perl5/5.26.0/x86_64-linux-thread-multi/DynaLoader.pm line 193. # at /usr/lib/perl5/vendor_perl/5.26.0/x86_64-linux-thread-multi/YAML/Syck.pm line 36. # BEGIN failed--compilation aborted at /usr/lib/perl5/vendor_perl/5.26.0/x86_64-linux-thread-multi/YAML/Syck.pm line 36. # Compilation failed in require at /home/pterjan/rpmbuild/BUILD/Tapper-Remote-5.0.0/blib/lib/Tapper/Remote/Config.pm line 12. # BEGIN failed--compilation aborted at /home/pterjan/rpmbuild/BUILD/Tapper-Remote-5.0.0/blib/lib/Tapper/Remote/Config.pm line 12. # Compilation failed in require at t/tapper-remote-config-prc.t line 8. # BEGIN failed--compilation aborted at t/tapper-remote-config-prc.t line 8. Can't locate object method "get_local_data" via package "Tapper::Remote::Config" at t/tapper-remote-config-prc.t line 14. # Tests were run but no plan was declared and done_testing() was not seen. # Looks like your test exited with 255 just after 1. t/tapper-remote-config-prc.t .. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 1/1 subtests # Failed test 'use Tapper::Remote::Config;' # at t/tapper-remote-config.t line 8. # Tried to use 'Tapper::Remote::Config'. # Error: Can't load '/usr/lib/perl5/vendor_perl/5.26.0/x86_64-linux-thread-multi/auto/YAML/Syck/Syck.so' for module YAML::Syck: /usr/lib/perl5/vendor_perl/5.26.0/x86_64-linux-thread-multi/auto/YAML/Syck/Syck.so: undefined symbol: Perl_pad_sv at /usr/lib/perl5/5.26.0/x86_64-linux-thread-multi/DynaLoader.pm line 193. # at /usr/lib/perl5/vendor_perl/5.26.0/x86_64-linux-thread-multi/YAML/Syck.pm line 36. # BEGIN failed--compilation aborted at /usr/lib/perl5/vendor_perl/5.26.0/x86_64-linux-thread-multi/YAML/Syck.pm line 36. # Compilation failed in require at /home/pterjan/rpmbuild/BUILD/Tapper-Remote-5.0.0/blib/lib/Tapper/Remote/Config.pm line 12. # BEGIN failed--compilation aborted at /home/pterjan/rpmbuild/BUILD/Tapper-Remote-5.0.0/blib/lib/Tapper/Remote/Config.pm line 12. # Compilation failed in require at t/tapper-remote-config.t line 8. # BEGIN failed--compilation aborted at t/tapper-remote-config.t line 8. Can't locate object method "get_local_data" via package "Tapper::Remote::Config" at t/tapper-remote-config.t line 14. # Tests were run but no plan was declared and done_testing() was not seen. # Looks like your test exited with 255 just after 1. t/tapper-remote-config.t ...... Dubious, test returned 255 (wstat 65280, 0xff00) Failed 1/1 subtests # Failed test 'use Tapper::Remote::Net;' # at t/tapper-remote-net.t line 31. # Tried to use 'Tapper::Remote::Net'. # Error: Can't load '/usr/lib/perl5/vendor_perl/5.26.0/x86_64-linux-thread-multi/auto/YAML/Syck/Syck.so' for module YAML::Syck: /usr/lib/perl5/vendor_perl/5.26.0/x86_64-linux-thread-multi/auto/YAML/Syck/Syck.so: undefined symbol: Perl_pad_sv at /usr/lib/perl5/5.26.0/x86_64-linux-thread-multi/DynaLoader.pm line 193. # at /usr/lib/perl5/vendor_perl/5.26.0/x86_64-linux-thread-multi/YAML/Syck.pm line 36. # BEGIN failed--compilation aborted at /usr/lib/perl5/vendor_perl/5.26.0/x86_64-linux-thread-multi/YAML/Syck.pm line 36. # Compilation failed in require at /home/pterjan/rpmbuild/BUILD/Tapper-Remote-5.0.0/blib/lib/Tapper/Remote/Net.pm line 12. # BEGIN failed--compilation aborted at /home/pterjan/rpmbuild/BUILD/Tapper-Remote-5.0.0/blib/lib/Tapper/Remote/Net.pm line 12. # Compilation failed in require at t/tapper-remote-net.t line 31. # BEGIN failed--compilation aborted at t/tapper-remote-net.t line 31. Attempt to reload Tapper/Remote/Net.pm aborted. Compilation failed in require at /usr/lib/perl5/vendor_perl/5.26.0/Module/Runtime.pm line 317. # Tests were run but no plan was declared and done_testing() was not seen. # Looks like your test exited with 255 just after 1. t/tapper-remote-net.t ......... Dubious, test returned 255 (wstat 65280, 0xff00) Failed 1/1 subtests Test Summary Report ------------------- t/00-load.t (Wstat: 512 Tests: 3 Failed: 2) Failed tests: 2-3 Non-zero exit status: 2 t/tapper-remote-config-prc.t (Wstat: 65280 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 255 Parse errors: No plan found in TAP output t/tapper-remote-config.t (Wstat: 65280 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 255 Parse errors: No plan found in TAP output t/tapper-remote-net.t (Wstat: 65280 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 255 Parse errors: No plan found in TAP output Files=8, Tests=6, 1 wallclock secs ( 0.02 usr 0.02 sys + 1.01 cusr 0.10 csys = 1.15 CPU) Result: FAIL Failed 4/8 test programs. 5/6 subtests failed. Makefile:888: recipe for target 'test_dynamic' failed make: *** [test_dynamic] Error 255 error: Bad exit status from /home/pterjan/rpmbuild/tmp/rpm-tmp.hNyVJT (%check) RPM build errors: Bad exit status from /home/pterjan/rpmbuild/tmp/rpm-tmp.hNyVJT (%check) I: [iurt_root_command] ERROR: chroot